SYMA Z3 Manuale utente

12+

MAIN FEATURES

●Utilizes the 4-axis structure, enabling the drone to be even more

flexible and speedy. It suitable for for both spacious indoor &

outdoor areas.

●Built-in 6-axis gyro stabilizer, barometer and optical flow sensor to

ensure the accuracy of inflight position.

●Be capable of 360°stunt flip function,optical flow positioning,

auto hover function.

●Headless function makes it easy for directional control.

●Auto take-off and landing function make it easier and safer to control.

●HD camera with real-time transmission function for getting

the fun of aerial photography.

●With flight plan function, when the drone is controlled by mobile

phone.

FOLDING DRONE

USER MANUAL2

-1-

Safety Guide

Repair and maintenance

1.Please store the smaller-sized drone accessories in places that are out of

reach of children.

2.This drone is very powerful. For all first-time flights, the left joystick must be

slowly pushed up in order to prevent the drone from ascending too fast to

avoid unnecessary collision and possible damage and injury.

3.When the flight is ended, first turn off the power of the remote control.

Then turn off the power of the drone.

4.Avoid placing the batteries in places with high temperatures and exposure

to heat.

5.Take extra precaution to ensure that the drone is at a minimum distance of

15 feet from the pilot, other people, and animals in order to prevent bodily

injury during flight operation. A minimum separation distance of 20 cm must

be maintained between the user’s body and the device under normal use

condition.

6.This drone is for people ages 12+. It must be flown always within the line of

sight of the pilot(or instructor) and flown safely.

7.Non-rechargeable batteries are not to be recharged; Batteries are to be

inserted with the correctpolarity; Different types of batteries or new and

used batteries are not be mixed.

8.When the drone is not in use, please remove the batteries in the remote

control.

9.The supply terminals are not be short-circuited.

10.Discharge the battery to 40%-50% (On a full charge, fly for half of the total

flight time) if it will not be used for 10 days or more, this can greatly extend

the battery life.

11.Please keep a safe distance from the spinning propellers to avoid injury.

12.To ensure the electromagnetic environment requirement of the aviation

radio (station), using remote controls in the zone, which is in a radius of

about 5000m zone from the circle center of the airport runway, is forbidden.

All users also should abide by the regulation of the radio set forth by

government and regulatory agencies including the duration and area.

13.Only uses the recommended transformer for the model, and the transformer

is not a model. Disconnect the transformer from the model which is available

cleaning with liquids before cleaning. Check the cord, plug, enclosure and

other parts of the transformer regularly. If any damages have been

discovered, please immediately stop using it, until it was completely repaired.

14.Never look steadily at the laser beam since the laser radiation.

15.Attention：Drone assembly under adult supervision.

16.The pilot is responsible for the safe operation and safe distance from

uninvolved persons and property on the ground and from other airspace

users and shall never fly the drone above crowds (> 12 persons).

17.Open the battery cover of the toy with screwdriver.

18.The packing has to be kept since it contains important information.

1.Use dry and soft cloth to clean this product.

2.Avoid exposing this product to heat.

3.Do not immerse this product in water, otherwise, the electronic parts will be

damaged.

4.Transformers used with the toy are to be regularly examined for damage to the cord,plug,

enclosure and other parts,and that,in the event of such damage,the toys must be used with

this transformer until the damage has been repaired.

-2-

Protective Gear’s Installation Methods

Fold operation

Installation of Mobile Phone Retaining Clip

Package description

●Drone

●Remote Control

●User Manual

●4 Blades

●Charging Cable

●4 Protective Gears

●Mobile Phone Retaining Clip

2. Insert the fixed rods on the protective

gear into the two sockets in the arm of

the drone as shown and fix them tightly.

1. Insert the protective gear into the

arm of the drone as shown.

1.Pull up the phone clip

cover from behind the

remote control.

3. Press the handles to

adjust the jaws.

2.Insert the phone clip

holder into the

connector at the top

of the remote control.

Mobile phone retaining clip’s attachment method:

2. Manually fold the arm in the direction

of the arrow until it is fully folded.

1. Manually extend the arm in the

direction of the arrow until it is fully

extended.

The following items can be found in this product package:

-3-

Note: charging input voltage must be 5V (input

current 2A shall be accurate, input current size

will directly affect charging time), The change

of charging indicator light shall prevail light

shall prevail.

1.Press the power button on the top of the

drone to make sure the drone is turned

“OFF”.

2.Press the fixed components at the bottom

of the battery and pull out the battery.

4.After charging completed, replace the

battery into the drone.

Precautions as follows during charging of battery:

- Avoid placing the active batteries in places with direct exposure,

sunlight and high temperatures. For example, naked light or electrical

equipment installations; otherwise it may cause damages or explosions.

- Avoid immersing the batteries in the water. The batteries shall be stored

in a cool and dry place.

- Avoid dismantling the batteries.

- During the charging of battery, avoid leaving the charging place.

- Rechargeable batteries are to be removed from the toy before being

charged.

- Rechargeable batteries are only to be charged under adult supervision.

- Exhausted batteries are to be removed from the toy.

- Caution：Risk of explosion if battery replaced by an incorrect type,dispose

of used batteries according to the instructions.

The charging time is about 120 minutes; Hover flight time

is approximately 8 minutes.

3. Align the charging head of the USB charging

cable with the charging port of the battery

and clamp it.

Battery Changing and Charging Methods for Drone

-4-

Understanding your remote control

Mobile Phone

Retaining Clip

Power ON/OFF

Right joystick

Press and hold to

enter/exit headless mode.

Press to change high/low

speed.

Left joystick

Keep pushing in until

trimming control finished.

To clear all the trimming

setting,keep pushing

and press the power

button at the same time.

Remote control’s button function description:

360°Stunt flip

Auto take-off and landing

Battery installation for remote control:

Battery cover

4 x AA Batteries

Battery Installation Method: Open up the battery cover at the back of the

remote control. Correctly place 4 x AA alkaline batteries in the battery box

in strict adherence to the polarity instructions ( batteries are not included).

1. During the battery installation, it must be ensured that the

polarities of the batteries are matched with that of the battery

box. No battery shall be installed with the opposite polarity.

2. Please do not use new and old batteries together.

3. Please do not use different types of batteries together.

4. Do not use rechargeable batteries.

-5-

1. Flight preparation

2.Turning on the drone

Method 2:

Method 1:

Press the power button of the remote

control.

Press the power button on the top of

the drone to 1-2S make sure the

drone is turned “ON”.

Push the left joystick (throttle) to the

highest point and then back to the

center, the blades of the drone start

rotating slowly.

Push the left and right joysticks to

the bottom inner corners for 1

second, the blades of the drone start

rotating slowly.

Push the left joystick (throttle) up to

the highest point and then pull down

to the lowest point. When the indica-

tor lights in the drone change from

quick flashing to the continuous

lighting, it means that the drone goes

into the flight standby mode.

Install the drone battery in place.

Step1:

Step2:

Step3:

Step4:

Flight Preparation and Turning the Drone ON and Off

-6-

3. Turning off the drone

Method 1:Push the left joystick (throttle) to

the lowest level and hold for 2 to

3 seconds, the drone can then be

turned off.

Method 3:

1.If the drone is out of the range of the flight, the indicator light will

flash slowly, and then slow down.

2.When the remote control is switched off or the power is cut off, the

drone will automatically slow down to stop.In the process , open

the remote control to control again.

Method 3: When the drone is in flight, press

the button B, the drone will descend

to the ground and lands.

Method 2:Push the left and right joysticks

to the bottom inner corners for 1

second, the blades of the drone

start rotating slowly.

When the drone is stationary, press

the button B, the drone automatically

takes off and hovers at a certain

height.

Operating direction

Drone Controlling Diagram

When the left joystick (throttle) is

pushed towards the left or right,

the drone will turn left or right

correspondingly.

When the right joystick (rudder) is

pushed towards the left or right,

the drone will fly sideways on the

left or right correspondingly.

Front

-7-

Ascending and descending control Forward and backward control

When the left joystick (throttle) is

pushed upwards or downwards, the

drone will ascend or descend

correspondingly.

When the right joystick (rudder) is

pushed upwards or downwards, the

drone will fly forward or backward

correspondingly.

Left turning and right turning

control

Left side flying and right side

flying control

-7-

Trimming operation

Forward and backward trim control

If the drone automatically flies forward/backward

while hovering, press in the left joystick and at the

same time push the right joystick

backward/forward slightly to fine tune the

direction. Don’t release the left joystick until the

drone is flying in a stable state.

If the drone automatically flies towards the

left/right side while hovering, press in the left

joystick and at the same time push the right

joystick right/left slightly to fine tune the direction.

Don’t release the left joystick until the drone is

flying in a stable state.

Left/right side flight trim control

-8-

Product Features

1. Low-Voltage Protection:

2.Over-Current Protection:

5.360°Stunt Flip Function:

3.Level Calibration Function:

4.High/Low Speed Function:

When the four indicator lights at the bottom of drone

start flashing, it means that the drone's battery power is

low. At this time, please control the drone return.

When the drone encounters direct impact from a

foreign object, or is obstructed, or the blades are not

rotating, the drone will go into the over-current

protection mode.

Place the drone on a level surface and at the same

time, push both left and right joysticks to the lower right

corners for 2 to 3 seconds; the indicator lights on the

drone will blink rapidly, and they will return to solid

status after about 2 to 3 seconds. The level calibration is

successful.

Low speed by default when first powered-on.

Possible to switch the function mode of high/low

speed by pressing the right joystick for a short

time. It is switched into high speed mode when

two ”beep” sounds come from the remote control,

pressing the right joystick for a short time under

fast speed mode and then one “beep” sound

would come from the remote control,then it is

switched back into low speed mode.

When you are familiar with the basic actions,

you can proceed to explore even more

exciting stunt actions. Fly the drone to a

height of above 3 m above the ground, press

the upper right corner button (Stunt Flip

Button) on the remote control and

simultaneously push the right joystick to the

farthest position of Front/Back/Left/Right, the

drone will now execute the Front/Back/ Left/

Right stunt flip function.

Note: Drone will have the best stunt flip action when the batteries are fully charged.

-9-

7. Headless Function:

After using the left joystick (throttle) to control the ascending/descending flight

of the drone, release the left joystick (throttle) and the drone will hover at that

height when the joystick is released.

Front

Back

Left Right

6.Optical flow Hover & Auto Hover Function:

When the drone is turned on, the drone will automatically start the optical

flow positioning function when hovering in the air, and the drone will remain

stationary at a certain point.

②Auto Hover Function:

①.Defining forward direction:

●Press on the power button of the remote control.

●Press the power button of the drone, and adjust the

specified direction of the drone’s head under the

headless mode as the new forward direction.

●Push the left joystick (throttle) on the remote control

up to the farthest position and then pull down to the

farthest position. When the remote control issues a

long “beep” sound, it means the frequency and

defining forward direction functions are completed.

①Optical flow hover function

1.Achieve fixed-point accuracy of

about 0.5 meters.

2.If the light is dark, the ground

reflects, the height is greater than

12 meters, or the wind is above

level 2,the optical flow positioning will

influenced under these conditions, at

this time the indicator light of the

drone will be flashing three times.

Note：

Altri manuali per Z3

Indice

Manuali Drone popolari di altre marche

Ryze

Ryze Tello Manuale utente

PowerVision

PowerVision PowerRay Manuale utente

Force1

Force1 rogue F72 Manuale utente

Zerotech

Zerotech DOBBY Manuale utente

Protocol

Protocol VIDEODRONE AP Manuale utente

dji

dji Matrice M210 Manuale utente

MAKE

MAKE Terry Kilby Manuale utente

RUKO

RUKO F11 Manuale utente

Dynali

Dynali 25 H Guida

dji

dji PHANTOM 4 Manuale utente

Atlas

Atlas AtlasPRO Manuale utente

Twodots

Twodots TVVIN BOARD Manuale utente

GDU

GDU SAGA Manuale utente

Ares

Ares ETHOS QX 130 Manuale utente

Walkera

Walkera ZHUN Manuale utente

dji

dji WIND-4 Manuale utente

Potensic

Potensic D58 Manuale utente

Arris

Arris M900 Manuale utente