TAG Heuer POCKET PRO Manuale utente
TAGHeuer Timing
Page 1 / 20
P
OCKET PRO
HL400-C
CIRCUIT
User Manual
Version 09/2015
TAGHeuer Timing
Page 2 / 20
Contents Table
1. Concept 3
2. Standard Timing Mode 4
2.1.
LCD description 4
2.2.
General 4
2.2.1.
How to navigate the different modes 4
2.2.2.
Power 4
2.2.3.
Time Memory 5
2.2.4.
Delete Memory 5
2.3.
Date Mode 6
2.4.
STOPWATCH mode 7
2.5.
Count Down mode (CD) 8
2.5.1.
Count Down timing 8
2.6.
TIME Mode 9
2.6.1.
Internal Time of Day setting 9
2.6.2.
Time of day synchronisation 9
2.6.3.
To Synchronise at Zero 9
2.6.4.
Timing 10
3. Specific Circuit Timing Modes 11
3.1.
Qualification (mode A) 11
3.2.
Lap Time (Mode B) 13
3.3.
Multi Count Down (mode C) 14
4. Recommendations 15
5. Download a new version of Firmware 15
6. Technical specification 16
6.1.
Pocket Pro characteristics 16
6.2.
USB Connector 16
7. Quick Guide 17
8. Note 19
TAGHeuer Timing
Page 3 / 20
Concept
1.
The Pocket Pro Circuit App, Pocket Pro HL400-C, gives users access to timekeeping
functions dedicated to the timing of motor sports / race tracks.
The innovative and bespoke application makes it possible to time training sessions for
circuit events with individual starts and finishes (qualifying), lap time with best lap and gap
plus 3 individual count down programmes up to 39 hours).All times are memorised and can
be recalled and viewed for each competitor.
The Pocket Pro electronic stopwatch is the latest in TAG Heuer's Professional Timing
development regime. In addition to the three exclusive timing modes dedicated to Motor
sports, this 1/100th second handheld timepiece also encompasses standard stopwatch
modes, including Split / Lap time measurement, countdown, and timing based on time of
day.
Together with its integrated USB connector; free POCKET MANAGER Application and
Pocket-Pro 800 measurements internal memory, the device makes the downloading,
analysis, printing and archiving of results extremely simple.
Results can also be viewed or printed from your laptop or pc instantly.
The USB connector (HL400-4) enables connection to a photocell, a manual switch or a
wireless radio input (HL615, HL675).
Pocket Pro Manager adjusts a Lock Time for the USB Input.
Note:
Pressing the hard reset (to the right of the USB connector) resets the Lock
Time value to 0.01 sec (minium)
TAGHeuer Timing
Page 4 / 20
Standard Timing Mode
2.
Several timing modes are available:
Date / Time / Count Down / Stopwatch.
2.1. LCD description
1. Competitor Sequence / Memory Status
2. Battery / Mode Setting / Running status
3. Timing Mode
4. Information Split / Lap
5. Timers
2.2. General
2.2.1. How to navigate the different modes
To navigate into a different mode:
- First the Pocket Pro has to be stopped (STOP)
- Reset memory (START/STOP + MEMORY)
- Pressing the MODE button now allows you to change the Timing Mode
Sequence:
DATE
STOPWATCH
TIME
CD
A
B
C
2.2.2. Power
The Pocket Pro functions with an internal battery. It can be recharged when it is
connected to a PC (USB cable) or by a (USB – 5VDC) power supply
When not used for 36hours, the Pocket Pro will switch OFF automatically (LCD OFF)
To wake up the Pocket Pro, just press any button.
It is also possible to switch OFF manually the Pocket Pro by pressing simultaneously
the MODE and MEMORY buttons for 5 seconds.
When the Pocket Pro is OFF, all the times are stored in memory.
The icon will indicate the level of the battery
During charge: 75% ON / 25% OFF blinking
Fully charged: with USB Cable: icon ON
Without USB cable: icon OFF
Low level (<10% charge): blinking 50% ON & 50% OFF
(you still have 2-3 days autonomy)
TAGHeuer Timing
Page 5 / 20
2.2.3. Time Memory
The Pocket Pro has a memory of 800 times.
The number of memorized times is shown on the 3 digits (Memory status)
When the memory reaches 90% capacity (720 times), the 3 digits will flash.
Warning
Once the memory is full (800 times), the next time recorded will be stored
as 001 automatically overwriting the original time
The memorised time can be recalled and displayed on the LCD at any time (even
during a timing session).
By pressing the MEMORY button, the memorized time 001 will be displayed as the
button is held down. The number of the memory shown is displayed on the top-left of
the LCD
Press the MEMORY button again and the next stored time will be displayed.
2.2.4. Delete Memory
To delete the memory, press simultaneously START/STOP and MEMORY
buttons.
Warning
You will not receive a request for you to “confirm Delete Memory”.
Once this step is made, all times are irretrievably deleted.
TAGHeuer Timing
Page 6 / 20
2.3. Date Mode
This mode allows you to change the date of the Pocket Pro.
To set the date:
- Press the MEMORY button: the first digit will flash and SET icon is ON
- Press the SPLIT/LAP button to change the value
- Press the MEMORY button to move to the next digit
Validate your setting with the MODE button (SET icon is OFF)
1. Icon Set ON = Setting available
2. Date setting (
red digit blinking 25.03
)
3. Year setting (2013)
4. Time of Day (set in menu TIME)
TAGHeuer Timing
Page 7 / 20
2.4. STOPWATCH mode
This timing mode allows the timekeeper to make a Start/Finish, with split time
(SPLIT) and lap time (LAP) with 1/100th second precision
1. Number of split / Memory status
2. Running status
3. Split time
4. Lap Time
5. Running time
The time displayed is up to 59’59.99’’ (1 hour)
SPLIT : Split time, or cumulative time (SPLIT/LAP button)
LAP : Lap time (SPLIT/LAP button)
Running Time: Running time between Start and Finish
The running time always starts from 00:00:00
- To start, press the START/STOP button ( icon is ON)
- Three times are running and displayed
- To record a Split / Lap, press SPLIT/LAP Button
The SPLIT and LAP time is stopped. The running time (bottom) continues to run
At each press of the SPLIT/LAP button, the memory sequence increases
It is possible to recall and view previous split and lap times during a session by
pressing the MEMORY button
For simple viewing in this mode, it is possible to reduce the information, and display
only SPLIT or LAP. For this, during the race, press the button MODE
TAGHeuer Timing
Page 8 / 20
2.5. Count Down mode (CD)
This mode allows you to make a unit count down or loop count-down
1. Number of split / Memory status
2. Running status
3. Counter
4. Count Down (max 59:59.9)
2.5.1 Set Count Down
To change the Count-Down value, the memory first has to be deleted
To set the Count-Down value:
- Press the MEMORY button: the first digit will flash and SET icon is ON
- Press the SPLIT/LAP button to change the value
- Press again the MEMORY button to change to the next digit
-Validate your setting with the MODE button (SET icon is OFF)
2.5.1. Count Down timing
- To start the count down, press START/STOP button ( icon is OFF)
- The count-down value decreases (on the bottom line)
- A timer (on the top) is started (increases)
At any time it is possible to PAUSE and RESTART the count-down
A long single beep will sound at the end of the Count-Down
The count-down will stop automatically at 00:00
To restart a new count-down, you have to reset the value by pressing the SPLIT/LAP
button
During the count-down sequence, by pressing the MODE button, it is possible to
change the Single Count-Down to Auto-Restart Count-down (loop mode)
The CD icon on the LCD will switch
In this Auto-Restart Count-Down, during the last 5 seconds, the Pocket Pro will sound
a single short beep and a then long beep at 00:00
The Pocket Pro will restart automatically from the pre-defined time of the count-down
The timer will run and show the full time since the first Start
To stop the sequence, you have to RESET the Pocket Pro
TAGHeuer Timing
Page 9 / 20
2.6. TIME Mode
This timing mode allows you to memorize the time of day at each split
This mode is very useful as a back-up system during a timing session and functions
similarly to other timing systems working at “time-of-day” such as the CP545 Chrono-
Printer, Mini Timer or Start Clock
In Time mode, you have the running time on the top line of the LCD and the time of
day on the bottom line of the LCD
1. Number of split / Memory status
2. Running status
3. Running Time (hh:mm:ss)
4. Running Time (1/100)
5. Time of Day
2.6.1. Internal Time of Day setting
To set the Internal Time of Day on Pocket Pro:
- The Pocket Pro memory has to be reset (START/STOP + MEMORY)
- Press and hold the MEMORY button for 5 sec: the first digit will flash and
SET icon is ON
- Press the SPLIT/LAP button to change the value
- Press the MEMORY button to move to the next digit
2.6.2. Time of day synchronisation
- Press SPLIT/LAP and START/STOP buttons simultaneously
- The time of day of the Pocket Pro will be displayed on the top of the LCD with 1
minute in advance
- The synchro will be automatic at the end of the full minute
2.6.3. To Synchronise at Zero
- Press START/STOP button
The time automatically starts from zero
TAGHeuer Timing
Page 10 / 20
2.6.4. Timing
Once the Synchronization is made, the icon appears
To memorize the time of day, press the SPLIT/LAP button
The time on the LCD will stay and the passing counter (top-left) is increased
To see the time of the day running, press the MEMORY button
Questo manuale è adatto per i seguenti modelli
1
Indice
