Tandberg Data SDLT220-320 INTEGRATION Manuale utente

TANDBERG Super DLTTM

Product manual

Revision 2 June 2002 - 432589-01

SDLT 220 and SDLT 320 Product Manual

Trademarks

Quantum, the Quantum logo, DLTtape, the DLTtape logo, Super DLTtape and the Super DLTtape

logo are trademarks of Quantum Corporation registered in the U.S.A. and other countries. Laser

Guided Magnetic Recording (LGMR) and Pivoting Optical Servo (POS) are trademarks of

Quantum Corporation.

Other company and product names used in this document are trademarks, registered trademarks, or

service marks of their respective owners.

Legal Disclaimers

The information contained in this document is the property of Tandberg Data ASA.

Tandberg retains its copyright on the information contained herein in all cases and situations of

usage, including derivative works. The possessor agrees to safeguard this information and to

maintain it in confidence and not re-publish it in whole or in part without Tandberg’s prior written

consent.

Tandberg Data reserves the right to make changes and improvements to its products, without incurring

any obligation to incorporate such changes or improvements in units previously sold or shipped.

It is the responsibility of the user to carefully read and understand the User Manual statements for

Class A Equipment and Class B Equipment that appear on page iv and page v, respectively.

Contact Information

You can request publications from your Tandberg Data Sales Representative or order them

directly from Tandberg Data.

Telephone numbers and street addresses change frequently; for the latest, up-to-date contact

information, visit:

www.tandberg.com

Telephone numbers, street addresses, time zones, and other pertinent facts are listed in the

Support section of the web site.

SDLT 220 and SDLT 320 Product Manual

Revision History

Revision Date (YYMMDD) Summary of Changes

422216-01 020610 Initial Release

SDLT 220 and SDLT 320 Product Manual

User Manual Statements for Class A Equipment (Internal Tape

System)

This equipment generates, uses, and may emit radio frequency energy. The equipment has been

tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against radio frequency

interference in a commercial installation.

Operation of this equipment in a residential area may cause interference, in which case the user at

his own expense will be required to take whatever measures may be required to correct the

interference.

Any modifications to this device—unless expressly approved by the manufacturer—can void the

user’s authority to operate this equipment under Part 15 of the FCC rules.

Note: Additional information on the need to interconnect the device with shielded (data) cables or

the need for special devices, such as ferrite beads on cables, is required if such means of

interference suppression was used in the qualification testfor the device. This information will vary

from device to device and needs to be obtained from the EMC (Electromagnetic Compatibility)

group or product manager.

Warning!

This is a Class A product. In a domestic environment this product may cause radio interference in

whichcasetheusermayberequiredtotakeadequatemeasures.

Achtung!

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses

Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende

Gegenmaßnahmen verantwortlich ist.

Warning!

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Attention!

Ceci est un produit de Classe A. Dans un environnement domestique, ce produit risque de créer des

interférences radioélectriques, il appartiendra alors à l'utilisateurde prendre les mesures spécifiques

appropriées.

SDLT 220 and SDLT 320 Product Manual

User Manual Statements for Class B Equipment (Tabletop Tape

System)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference that may cause undesirable operation.

Any modifications to this device—unless expressly approved by the manufacturer—can void the

user’s authority to operate this equipment under Part 15 of the FCC rules.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio or TV technician for help.

Note: Additional information on the need to interconnect the device with shielded (data) cables or

the need for special devices, such as ferrite beads on cables, is required if such means of

interference suppression was used in the qualification test for the device. This information will vary

SDLT 220 and SDLT 320 Product Manual

from device to device and needs to be obtained from the EMC (Electromagnetic Compatibility)

group or product manager.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Table of Contents

CHAPTER1 Introduction.............................. 1-1

Purpose and Scope..........................................1-1

Referenced Documents . . . ...................................1-2

RelatedDocuments......................................... 1-2

StructureofthisManual.....................................1-2

Conventions. . . ............................................ 1-4

ForMoreInformation.......................................1-4

ReaderComments..........................................1-5

CHAPTER 2 SDLT 220/320 Product Information . . . . . . . . . . . 2-1

Overview.................................................2-1

SDLT 220/320 Product Features ............................... 2-2

SDLT 220/320 Technology ...................................2-3

Laser Guided Magnetic Recording ..........................2-3

Pivoting Optical Servo. ...................................2-4

Magneto Resistive Cluster Heads . .......................... 2-4

Advanced Partial Response Maximum Likelihood ..............2-5

Advanced Metal Powder Media. . . .......................... 2-5

Positive Engagement . . ...................................2-5

SDLT 220/320 Modular Design ...............................2-6

Data Control Module . . ...................................2-7

Tape Control Module. . ................................... 2-8

TCMPCBA .........................................2-8

BasePlate...........................................2-8

CartridgeReceiver ....................................2-8

Positive Engagement Tape Leader Buckling Mechanism ......2-9

Front Panel Module . . . ...................................2-9

Electronic Interface Module............................... 2-10

Table of Contents

SDLT Cartridge Tape Module .............................2-10

Key Differences Between the SDLT 220 and the SDLT 320 . ....... 2-11

Tandberg Data DiagnosticsTools ............................2-12

TapeAlert................................................2-13

CHAPTER3 DriveSpecifications....................... 3-1

Product Specifications....................................... 3-1

Interface Type .......................................... 3-2

Physical Dimensions . . ...................................3-2

StorageCapacity ........................................3-3

Compression............................................3-3

DataIntegrity...........................................3-4

MaximumDataTransferRate..............................3-5

Reliability (MTBF) . . . ...................................3-6

Load and Unload Cycles .................................. 3-6

Functional Specifications . ................................... 3-6

SDLT 220/320 Performance Data . ..........................3-7

Shock and Vibration Specifications ..........................3-8

CurrentandPowerRequirements ..........................3-10

Tape System Recording Method . . ......................... 3-12

Environmental Specifications ................................3-13

AirFlowRequirements..................................3-13

Temperature and Humidity ...............................3-14

Storage and Shipment. . ..................................3-14

Altitude...............................................3-15

ParticulateContaminationLimits ..........................3-15

Recording Media Specifications ..............................3-15

Backward-Read Compatibility Transfer Rates ................3-17

CHAPTER 4 Installing Your Tape Drive. . . . . . . . . . . . . . . . . . . 4-1

Safety, Handling, and ESD Protection ..........................4-2

Safety Precautions .......................................4-2

Handling. . . ............................................4-3

Electrostatic Discharge Protection. ..........................4-4

Pre-Installation Guidelines ...................................4-5

Configuring and Installing an Internal Tape Drive .................4-6

Setting the Internal Drive SCSI ID ..........................4-7

Configuring the Internal Drive for TERMPWR ...............4-10

Configuring the Internal Drive for Narrow SCSI ..............4-10

Table of Contents

InstallingtheInternalTapeDrive...........................4-10

SecuringtheInternalTapeDrive........................4-11

Connecting the Internal Drive Cables.....................4-12

Configuring and Installing a Tabletop Drive.....................4-20

Configuring the Drive . ..................................4-20

InstallingtheTabletopDrive..............................4-21

SCSICables........................................4-21

ACPowerCable.....................................4-22

ConfirmingtheInstallation..................................4-23

CHAPTER5 UsingYourTapeDrive..................... 5-1

PowerOnSelfTest......................................... 5-2

PerformingaTrialBack-up...................................5-2

Overwriting 320-Formatted Cartridges in a 220 Drive..............5-3

Updating the Firmware . . . ...................................5-4

Update the Firmware Using the SCSI Bus.....................5-4

MakingaFUP/CUPTape .................................5-5

UsingaCUP/FUPTape...................................5-5

Troubleshooting the Firmware (Code) Update .................5-6

Cleaning the Tape Mechanism ................................5-7

OccasionalCleaningofTapeHead..........................5-7

WhentoUsetheCleaningTape.............................5-8

Life Expectancy of the Cleaning Tape........................ 5-8

Compatibility of the Cleaning Tape ..........................5-8

Loading the Cleaning Tape Into a Tabletop Drive...............5-9

Front Panel Controls and LEDs...............................5-10

Troubleshooting...........................................5-13

POST Troubleshooting. ..................................5-13

Over Temperature Condition ..............................5-15

CHAPTER6 SCSIDescription......................... 6-1

SCSIOverview............................................6-1

SCSI-2Commands.........................................6-3

SCSI-3Commands.........................................6-5

Parity....................................................6-6

Signal States . . ............................................6-6

Signal Values ...........................................6-6

SCSIIDs...............................................6-8

SCSI Signals . . ............................................6-8

Table of Contents

SCSI Signal Definitions...................................6-9

Signal Bus Timing ......................................6-10

CHAPTER7 RegulatoryCompliance.................... 7-1

Safety Regulations..........................................7-1

Safety Certifications. . . ...................................7-1

SafetyRequirements .....................................7-2

Electromagnetic Field Specifications . ..........................7-2

Electromagnetic Emissions ................................7-2

Electromagnetic Interference Susceptibility . . ................. 7-3

Conducted Emissions. . ...................................7-3

Radiated Emissions . . . ...................................7-4

Susceptibility and ESD Limits..............................7-5

Acoustic Noise Emissions. ...................................7-6

APPENDIXA SDLTITapeCartridge.....................A-1

Tape Cartridge Handling Guidelines. . ..........................A-2

Tape Cartridge Inspection Procedure . ..........................A-3

Tape Cartridge Write-Protect Switch . ..........................A-5

Loading a Tape Cartridge . ...................................A-7

Unloading a Tape Cartridge...................................A-8

Overwriting 320-Formatted SDLT Tape Cartridges ................A-8

APPENDIXB DLTIVTapeCartridge.....................B-1

Tape Cartridge Handling Guidelines. . ..........................B-2

Tape Cartridge Inspection Procedure . ..........................B-3

Tape Cartridge Write-Protect Switch . ..........................B-7

Loading a Tape Cartridge . ...................................B-8

Unloading a Tape Cartridge...................................B-9

Glossary

Altri manuali per SDLT220-320 INTEGRATION

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Tandberg Data Magazzinaggio

Tandberg Data

Tandberg Data STORAGE CAB4000 - Manuale utente

Tandberg Data

Tandberg Data LTO 1 Manuale utente

Tandberg Data

Tandberg Data StorageLoader 2U LTO Manuale utente

Tandberg Data

Tandberg Data StorageLibrary T40 T40 Manuale utente

Tandberg Data

Tandberg Data DLT-V4 Manuale del proprietario

Tandberg Data

Tandberg Data DLT7000 Manuale utente

Tandberg Data

Tandberg Data RDX QuikStor Manuale utente

Tandberg Data

Tandberg Data DAT 160 Manuale utente

Tandberg Data

Tandberg Data StorageLoader DLT VS160 Manuale utente

Tandberg Data

Tandberg Data StorageLoader DLT VS160 Manuale utente

Tandberg Data

Tandberg Data DAT 160 Manuale utente

Tandberg Data

Tandberg Data SLR AUTOLOADER PROGRAMMER Manuale utente

Tandberg Data

Tandberg Data SDLT220-320 INTEGRATION Manuale utente

Tandberg Data

Tandberg Data StorageLibrary T40+ Series Manuale utente

Tandberg Data

Tandberg Data SLRTAPEDRIVE - Manuale utente

Tandberg Data

Tandberg Data DAT 72 Manuale utente

Tandberg Data

Tandberg Data REPLACE TAPE DRIVE IN T24 OR T48 Manuale utente

Tandberg Data

Tandberg Data REPLACE TAPE DRIVE IN STORAGELOADER VXA... Manuale utente

Tandberg Data

Tandberg Data LTO-5 Manuale utente

Tandberg Data

Tandberg Data DLT-V4 Manuale utente

Tandberg Data

Tandberg Data 440LTO Manuale utente

Tandberg Data

Tandberg Data RDX QuikStation 8 Manuale utente

Tandberg Data

Tandberg Data StorageLoader DLT VS160 Manuale utente

Tandberg Data

Tandberg Data LTO-1 HH Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente