MODEL 4020 & 4030 ACCELEROMETER
TE CONNECTIVITY SENSORS/// MODEL 4020 & 4030 ACCELEROMETER 05/2016
WARRANTY
Measurement Specialties, Inc. accelerometers are warranted during a period of one year from date of shipment to original purchaser to be free
from defects in material and workmanship. The liability of Seller under this warranty is limited to replacing or repairing any instrument or
component thereof which is returned by Buyer, at his expense, during such period and which has not been subjected to misuse, neglect,
improper installation, repair, alteration, or accident. Seller shall have the right to final determination as to the existence and cause of a defect.
In no event shall Seller be liable for collateral or consequential damages. This warrant is in lieu of any other warranty, expressed, implied, or
statutory; and no agreement extending or modifying it will be binding upon Seller unless in writing and signed by a duly authorized officer.
RECEIVING INSPECTION
Every Measurement Specialties, Inc. accelerometer is carefully inspected and is in perfect working condition at the time of shipment. Each
accelerometer should be checked as soon as it is received. If the unit is damaged in any way, or fails to operate, a claim should immediately
be filed with the transportation company.
SERVICE CONCERNS
If a Measurement Specialties, Inc. instrument requires service, first contact the nearest Measurement Specialties, Inc. representative. They
may be able to solve the problem without returning the unit to the factory. If it is determined that factory service is required, call Customer
Service at the regional headquarters for an RMA number before return.
RETURNS
All units being returned to the factory require an RMA (Return Material Authorization) number before they will be accepted. This number may
be obtained by calling Customer Service at the regional headquarters with the following information; model number(s), quantity, serial
number(s), and symptoms of the problem, if being returned for service. You must include the original purchase order number if under
warranty.
RECALIBRATION SERVICES
The Vibration Sensors Design Center and its two manufacturing facilities in China and France offer factory re-calibration services for
Piezoresistive, Piezoelectric and Integrated Electronics Piezoelectric (IEPE, ISOTRON, ICP, etc.) accelerometers. NIST (US), DKD
(Germany), COFRAC (France) traceable calibration services on sensitivity at 100 Hz (102 or 120 Hz in Europe) and full frequency sweeps are
offered. Contact the regional headquarters for pricing information.
