4
True RMS Multimeter User Manual
1-Introduction
2-
• Ensure that the test leads are fully seated in the input jacks and keep fingers away
• Read, understand and follow Safety Rules and Operating Instructions in this
The True RMS Multimeter features True RMS measurements for more accurate
AC readings and a Low Z setting for eliminating errors caused by “ghost” voltages.
Functions include AC/DC voltage and current, resistance, continuity, capacitance,
frequency, duty cycle, temperature, and diode test. The True RMS Multimeter also
offers the added convenience of a built-in LED flashlight. This meter is fully tested
calibrated , with proper use, will provide many years of reliable service.
manual before using this meter.
• The meter’s safety features may not protect the user if not used in accordance
with the manufacturer’s instructions.
from the metal probe tips when taking measurements.
• Before changing functions using the selector switch, always disconnect the test
leads from the circuit under test.
• Use only UL listed test leads with the proper safety category rating.
• Comply with all applicable safety codes. Use approved personal protective
equipment when working near live electrical circuits-particularly with regard
to arc-flash potential.
• Use caution on live circuits. Voltages above 30V AC rms, 42V AC peak, or 60V
DC pose a shock hazard.
• Do not use if the meter or test leads appear damaged.
• Verify operation before using meter by measuring a known live voltage.
• Do not use the meter in wet or damp environments or during electrical storms.
• Do not use the meter near explosive vapors, dust gas.
• Do not use the meter if it operates incorrectly. Protection may be compromised.
• Do not apply voltage or current that exceeds the meter’s maximum rated input
• Do not operate meter while Low Battery warning is on. Replace batteries immediately.
limits.
WARNINGS
