TeeJet Technologies ISOBUS IC18 Manuale utente

USER MANUAL

IC18 SPRAYER

JOB COMPUTER

Software version 1.06

COPYRIGHTS

copied, photocopied, translated, or reduced in any form or by any means, electronic or machine readable, recording or otherwise, without

prior written consent from TeeJet Technologies.

TRADEMARKS

Unless otherwise noted, all other brand or product names are trademarks or registered trademarks of their respective companies or

organizations.

LIMITATION OF LIABILITY

TEEJET TECHNOLOGIES PROVIDES THIS MATERIAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR

IMPLIED. NO COPYRIGHT LIABILITY OR PATENT IS ASSUMED. IN NO EVENT SHALL TEEJET TECHNOLOGIES BE LIABLE FOR

ANY LOSS OF BUSINESS, LOSS OF PROFIT, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF TEEJET TECHNOLOGIES HAS BEEN ADVISED OF

SUCH DAMAGES ARISING FROM TEEJET TECHNOLOGIES SOFTWARE.

To ensure optimal use of the equipment, please read this manual thoroughly. Please contact TeeJet Technologies Customer Support or an

authorized TeeJet Technologies dealer if additional support is required.

RESPONSIBILITY FOR USE OF THIS PRODUCT

Regarding responsibility for use of this product, we refer to our sales and delivery terms which states:

Product Usage

Any use of the product is at the sole risk of the buyer. The buyer is therefore not entitled to any form for compensation caused by, for

example, any of the following:

►Disturbance to/from any electronic services or products that do not conform to the standards for CE marketing;

►Missing or poor signal coverage or a succession hereof from external transmitters/receivers used by the buyer; Functional faults which

apply to or from a PC-program or PC equipment not delivered by the seller;

►Faults that may arise from the buyers’ negligence to react to warnings and fault messages from the product or that can be traced to

negligence and/or absent constant control of the work carried out in comparison to the planned job.

When implementing any new equipment the buyer must take great care and pay attention. Any doubts as to the correct operation/use

should result in contacting the seller’s service department.

98-05204 R1 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Sprayer

Table of Contents

CHAPTER 1– PRODUCT OVERVIEW 1

OPTIONAL SYSTEM COMPONENTS 1

CHAPTER 2 – GETTING STARTED 3

START UP 3

APPLICATION MODE 3

PAGE LAYOUT AND NAVIGATION 4

Home Screen...................................................................................................................................................................4

Transport Mode................................................................................................................................................................4

Operation Mode...............................................................................................................................................................5

Main Setup Mode.............................................................................................................................................................6

Main Setup Menu Icons and Section Overviews ...................................................................................................7

CHAPTER 3 – MAIN SETUP IN SPRAYER MODE 8

Main Setup Screen ................................................................................................................................................................................ 8

Master Screen ......................................................................................................................................................................................... 9

Home Screen........................................................................................................................................................................................... 9

COUNTERS 10

Trip Counters.........................................................................................................................................................................................11

Active Trip Counter .............................................................................................................................................. 11

Area Counter........................................................................................................................................................ 11

Distance Counter ................................................................................................................................................. 11

Time Counter ....................................................................................................................................................... 11

Volume Counter ................................................................................................................................................... 11

Campaign Counters............................................................................................................................................................................11

Area Counter........................................................................................................................................................ 11

Volume Counter ................................................................................................................................................... 11

Time Counter ....................................................................................................................................................... 11

Total Counters.......................................................................................................................................................................................12

Area Counter........................................................................................................................................................12

Volume Counter ...................................................................................................................................................12

Time Counter .......................................................................................................................................................12

Export Counters ...................................................................................................................................................................................12

JOB PARAMETERS 13

Active Trip Counter ..............................................................................................................................................13

Preset Application Rates......................................................................................................................................13

Nozzle..................................................................................................................................................................13

MACHINE 14

Filling........................................................................................................................................................................................................14

Actual Content .....................................................................................................................................................14

Density.................................................................................................................................................................14

Density Factor......................................................................................................................................................15

Full Tank...............................................................................................................................................................15

Operation ...............................................................................................................................................................................................15

Application Rate Step ..........................................................................................................................................15

Speed Source ......................................................................................................................................................15

Simulated Speed..................................................................................................................................................15

Implement Parameters......................................................................................................................................................................16

Section Width.................................................................................................................................................................16

Boom Section Width ............................................................................................................................................16

One-Touch Equal Widths .....................................................................................................................................16

ii www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Sprayer

Nozzle Preset Setup......................................................................................................................................................16

Nozzle Preset.......................................................................................................................................................16

Nozzle Type .........................................................................................................................................................16

Nozzle Size..........................................................................................................................................................16

Low Pressure Limit ..............................................................................................................................................17

High Pressure Limit..............................................................................................................................................17

Reference Flow....................................................................................................................................................17

Reference Pressure.............................................................................................................................................17

Factory Settings...................................................................................................................................................17

Regulation Parameters..................................................................................................................................................18

Valve Calibration, Rough .....................................................................................................................................18

Valve Calibration, Fine.........................................................................................................................................18

Nozzle Spacing....................................................................................................................................................18

Regulation Mode..................................................................................................................................................18

Calibrations............................................................................................................................................................................................19

Implement Speed Sensor ..............................................................................................................................................19

Manual Calibration...............................................................................................................................................19

Automatic Calibration...........................................................................................................................................19

Flow Sensor...................................................................................................................................................................19

Manual Calibration...............................................................................................................................................19

Automatic Calibration...........................................................................................................................................19

Alarm Congurations.........................................................................................................................................................................20

CAN Speed Source Timeout................................................................................................................................20

Active Trip Count Information...............................................................................................................................20

Tank Content Minimum ........................................................................................................................................20

OEM ..........................................................................................................................................................................................................20

USER INTERFACE 21

Use Preferred VT.................................................................................................................................................21

This IC18..............................................................................................................................................................21

Pair with Switchbox..............................................................................................................................................21

Pair with BoomPilot ECU .....................................................................................................................................21

Currently Paired With Information........................................................................................................................21

Show Number on Soft Key...................................................................................................................................21

Sprayer Number (FI)............................................................................................................................................21

COMMUNICATION 22

HELP 22

Diagnostic ..............................................................................................................................................................................................23

Test Input .......................................................................................................................................................................23

Test Output ....................................................................................................................................................................23

Liquid Valve PWM Dutycycle ...............................................................................................................................23

Liquid Valve Direction ..........................................................................................................................................23

Master Valve ........................................................................................................................................................23

Section Valves .....................................................................................................................................................23

VT Data..........................................................................................................................................................................24

TECU.............................................................................................................................................................................24

About .......................................................................................................................................................................................................24

CHAPTER 4 – OPERATION MODE 25

AUTOMATIC OR MANUAL REGULATION MODE 25

OPERATION MODE OVERVIEW 26

Keys Descriptions..........................................................................................................................................................27

Section and Icon Descriptions .......................................................................................................................................27

Master Screen .......................................................................................................................................................................................28

Home Screen.........................................................................................................................................................................................29

APPLICATION RATE OPTIONS 29

iii

98-05204 R1 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Sprayer

Target Rate Percentage Increase/Decrease................................................................................................................................29

Regulation Valve Manual Open/Close..........................................................................................................................................29

Target Rate .............................................................................................................................................................................................30

With Switchbox ..............................................................................................................................................................30

Without Switchbox .........................................................................................................................................................30

BOOM SECTIONS 31

On/O Sections from the Left or Right........................................................................................................................................31

Without Switchbox .........................................................................................................................................................31

With Switchbox ..............................................................................................................................................................31

Start/Stop Application.......................................................................................................................................................................32

Without Switchbox .........................................................................................................................................................32

With Switchbox ..............................................................................................................................................................32

Master Stop Key ...................................................................................................................................................................................32

With Switchbox ..............................................................................................................................................................32

INFORMATION KEY 33

TRANSPORT MODE 34

APPENDIX A - FACTORY SETTINGS & RANGES 35

APPENDIX B - UNIT SPECIFICATIONS 37

98-05204 R1 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Sprayer

CHAPTER 1– PRODUCT OVERVIEW

Congratulations on the purchase of your new IC18 ECU built on the ISOBUS architecture. This IC18 unit has the capability of either

sprayer or NH3 control when integrated into the implement of either capability. When used within the guidelines of this manual, the IC18

controller will be a reliable application tool.

This manual covers the Sprayer functions of the IC18 ECU. For NH3 functions, see manual number 98-05230.

Use with your existing VT or Matrix® 570VT

• Works seamlessly and displays on any ISOBUS VT

• Easy navigation menu and data rich display

• IC18 Sprayer ECU suitable for use with NH3 and liquid fertilizer

• Automatic boom section control upgrade option

• Variable rate control available providing your VT has GPS and task control capability

• Easy navigation menu and data rich display

• Add additional ISOBUS ECUs as your needs change

• Provides basic rate control

• Standardized plugs, cables and software simplify installation and connectivity and result in true “plug and play” technology. IC18 ECU

resides on the implement, reducing hardware in the cab

Figure 1-1: IC18 Job Computer

OPTIONAL SYSTEM COMPONENTS

Matrix 570VT

The Matrix 570VT is a simple to operate, ISOBUS-certied 14.5 cm (5.7″) colour touch screen display suitable for bright daylight and

nighttime operation

Figure 1-2: Matrix 570VT

2www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Sprayer

Switchbox

Manual section control with remote master capibility. The switchboxs are available in two congurations.

►9 sections output or 8 sections and a master output

►6 sections output or 5 sections and a master output

Figure 1-3: Switchboxes

IC18 Spreader Electronic Control Unit

Use with your existing VT or the Matrix 570VT for dry product application

• Works seamlessly and displays on any ISOBUS VT

• Easy navigation menu and data rich display

• Add additional ISOBUS ECUs as your needs change

• Provides basic rate control or variable rate if the connecting VT has variable rate task control capabilities

• Standardized plugs, cables and software simplify installation and connectivity and result in true “plug and play” technology. IC18 ECU

resides on the implement, reducing hardware in the cab

Figure 1-4: IC18 Spreader Electronic Control Unit

BoomPilot Electronic Control Unit for IC18

BoomPilot (automatic boom section control) is possible in combination with software built into the IC18 Sprayer/NH3 Electronic Control Unit

(ECU). The ECU should be combined with the appropriate cable to interface with your BoomPilot system, spray controller and/or spraying

machine for quick and easy installation. Electronic Control Units and their related cables are designed to control as many boom sections as

the spray controller to which they are connect, up to a maximum of 9 boom sections.

Figure 1-5: BoomPilot Electronic Control Unit

98-05204 R1 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Sprayer

CHAPTER 2 – GETTING STARTED

• A rm touch is required when selecting a screen icon.

• Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting. Select the

ESCAPE KEY to escape without saving settings and return to the previous menu.

• The console needs to be cycled off and back on when changing or attaching equipment to the system.

• The menu structure on your display might vary from the one displayed in this User Manual depending on the virtual terminal being

used.

START UP

Power is continuously supplied to the job computer. The virtual terminal will give access to the job computer options and operation.

Figure 2-1: Master Screen - Crop Sprayer Mode

Matrix VT Setup Key

IC18 Crop Sprayer

Master Screen Key

Other options as available on

ISOBUS system

APPLICATION MODE

The IC18 job computer is programed to be either a sprayer or NH3 applicator. This setting has been established before leaving the factory,

but it can be changed after purchase with assistance from TeeJet Technologies Customer Service or your local dealer through the OEM

setup menu options.

Figure 2-2: Crop Sprayer

Cnt 1

5.0 42

470 l

bar

1.14 ha

+ 5%

1311 l/hakm/h

Figure 2-3: NH3 Applicator

Cnt 1

0.0

0 kgN 0.00 ha

+ 5%

1311 kg/min

kg/ha

km/h

kg/ha

This manual discusses specically the functions and options in Crop Sprayer Mode. See the specic IC18 NH3 User Manual for functions

and options in NH3 Mode.

4www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Sprayer

PAGE LAYOUT AND NAVIGATION

The Master Screen gives access to the systems currently available on your VT. From the Master Screen, the Home Screen gives access

to the IC18’s available functions.

Home Screen

The Home Screen gives access to the IC18’s available functions: Operation Mode, Transport Mode and Main Setup.

Figure 2-4: Home Screen - Crop Sprayer Mode

Operation Mode

Regulation Mode

Current selection, Auto/Manual, is highlighted with a green dot.

Main Setup Mode

Toggle Preset Target Rate

Quick View

Information Based on Current Active Trip

Master Screen Key

Transport Mode

While in Transport Mode, all operation functions are locked off and cannot be activated.

Figure 2-5: Transport Mode

Home Key

Speedometer

Master Screen Key

Indice

Altri manuali TeeJet Technologies Unità di controllo

TeeJet Technologies

TeeJet Technologies BoomPilot Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente