Tegam GEMINI 5541A Manuale utente
GEMINI 5541A
Page 1 of 4
5541A-901, Rev. AA
GEMINI 5541A RF POWER METER
Q
UICK
S
TART
G
UIDE
1. UNPACKING AND INSPECTION
Thank you for your purchase of the AE TEGAM GEMINI 5541A RF
Power Meter. This Quick Start Guide will provide the essential
information necessary to begin using your new instrument right
away. For a full explanation of the features and functions, however,
please download the Operator’s Manual at www.tegam.com.
1.1. Inspection
Each 5541A RF Power Meter is electrically and
mechanically inspected before shipment. Upon
receiving your new AE TEGAM RF Power
Meter, unpack all items from the shipping
container and inspect the items for any
obvious damage that may have occurred
during transit. Notify AE TEGAM
immediately if damage, dents, worn
connectors, or other irregularities are
found. Use the original packing materials if reshipment is necessary.
1.2. Package Contents
Each GEMINI 5541A RF Power Meter is shipped with:
GEMINI 5541A RF Power Meter1,
5541A-901, GEMINI 5541A RF Power Meter Quick Start Guide
Calibration Certificate and Documentation
1 Includes input/output connectors as specified at time of purchase
Figure
1
:
GEMINI 5541A
RF
Power Meter
GEMINI 5541A
Page 2 of 4
5541A-901, Rev. AA
2. INSTRUMENT DISPLAY
The 5541A RF Power Meter digital
direct-reading display, shown in Figure
2, provides forward and reverse power
measurements, VSWR, and frequency.
These readings are indicated on the
display by the designators FWD PWR,
REV PWR, VSWR, and FREQ
respectively. Units of measurement
are displayed on the right side of the display. The displayed
measurement data is updated three times per second.
NOTE: The Frequency and VSWR indications are informational and provided
only for the user’s convenience. For traceable frequency measurements, use
appropriate instruments.
3. CONNECTING THE RF POWER METER AND TAKING
YOUR FIRST MEASUREMENT
To meet published specifications, allow the instrument to
acclimate in the laboratory environment for at least 24 hours
after shipping, storage, or other exposure to temperatures
beyond its operating range of 18 to 28 °C.
Before connecting your 5541A RF Power
Meter to any RF power source, identify
the INPUT and OUTPUT ports. The INPUT
port and power flow direction are
designated by the symbol on the
instrument housing (see Figure 3).
NOTE: The 5541A RF Power Meter may be calibrated to either the input or
output port. However, the RF power source must always be connected to the
input port regardless of which port is calibrated. Failure to do so may result in
incorrect readings. Refer to the Calibration Certificate for port calibration
information.
Figure 2: 5541A RF Power Meter Display
and Power Flow Direction Symbol
Figure 3: Power Flow
Direction Symbol
GEMINI 5541A
Page 3 of 4
5541A-901, Rev. AA
Connect an IEEE 802.3af PoE (Power over Ethernet) compliant
device (switch/hub/router/etc.) to the 5541A RF Power Meter
The 5541A RF Power Meter display will illuminate.
NOTE: The 5541A RF Power Meter may be connected to any IEEE 802.3af
compliant device for power. However, the meter must be connected to the
same network as the host PC for communication.
Connect the 5541A RF Power Meter OUTPUT to a suitable load
using torque techniques appropriate for the connector type.
WARNING: High RF power levels may be present at the output of the
5541A RF Power Meter. Always connect an appropriate load to the
instrument output.
WARNING: The 5541A RF Power Meter should be serviced by qualified
personal only. Never attempt to open the instrument casing, disconnect
transmission lines, or otherwise service the meter while RF power is applied
to the system.
Failure to comply with these warnings may result in injury or death to
personnel, and damage to equipment.
Connect the 5541A RF Power Meter INPUT to the RF power
source using torque techniques appropriate for the connector
type.
Allow 10 minutes for the instrument to warm up.
Turn ON the source RF output power. The display will begin
updating immediately. Allow sufficient time for the readings to
stabilize before recording the measurement results.
GEMINI 5541A
Page 4 of 4
5541A-901, Rev. AA
4. GEMINI TOOLS™ RF POWER METER APPLICATION
4.1. Description
The GEMINI Tools power meter application is a free software
interface available for download to all 5541A RF Power Meter users.
The application allows for remote monitoring and data collection
from up to five instruments simultaneously. Data is stored in text files
and formatted for easy importing into spreadsheet, database, or
other data management programs.
4.2. Operation
Operation of the GEMINI Tools power meter application is
straightforward:
Download and run the installer found at
www.tegam.com/geminitools.
Launch the program and set the Configuration Parameters as
desired (click Tools -> Configuration).
Connect your new 5541A RF Power Meter to the PC or
compatible USB hub on which the GEMINI Tools power meter
application is running. The application will automatically detect
connected instruments.
Select the desired unit in the Available Meters group (hold the
CTRL key to select up to five (5) units).
Click START Data Collection to begin collecting measurement
data.
5. FURTHER INFORMATION
This Quick Start Guide is just the beginning. Please visit
www.tegam.com to download the Operation Manual and familiarize
yourself with all the features and benefits of your new AE TEGAM
GEMINI 5541A RF Power Meter.
Indice
Altri manuali Tegam Strumento di misura
Tegam
Tegam 1830A Guida alla risoluzione dei problemi
Tegam
Tegam GEMINI 5540A Manuale utente
Tegam
Tegam 1316A Manuale utente
Tegam
Tegam 1750 Manuale utente
Tegam
Tegam R1M-A Manuale utente
Tegam
Tegam R1L-D1 Manuale utente
Tegam
Tegam Advanced Energy GEMINI 5540A Manuale utente
Tegam
Tegam R1L-B Manuale utente
Tegam
Tegam R1L-BR1 Manuale utente
Tegam
Tegam 720A Manuale utente
Tegam
Tegam 253 Manuale utente
Tegam
Tegam R1L-BI Manuale utente
Tegam
Tegam 720A Manuale utente
Tegam
Tegam AVM-2000 Guida alla risoluzione dei problemi
Tegam
Tegam 710A Manuale utente
Tegam
Tegam 252 Manuale utente
Tegam
Tegam 3550 Manuale utente
Tegam
Tegam 710A Manuale utente
Tegam
Tegam 730A Manuale utente
Tegam
Tegam 3525 Manuale utente
