TEKELEK TEK 603 Manuale utente

Eco Oil Monitor

User Manual

Eco Oil Monitor User Manual

1 | Page

9-5935-03

Contents

1. Product Information .............................................................................................................................. 2

1.1 Definitions/Glossary .................................................................................................................. 2

1.2 Introduction ............................................................................................................................... 2

2. Features and Functions ......................................................................................................................... 4

2.1 Features ..................................................................................................................................... 4

2.2 Functions ................................................................................................................................... 4

2.3 LED............................................................................................................................................. 5

2.4 Display – Symbols & Indicators .................................................................................................. 5

2.5 Display Screens .......................................................................................................................... 7

CURRENT information screens............................................................................................................... 7

HISTORICAL information screens ........................................................................................................... 7

3. Alarms ................................................................................................................................................... 8

3.1 Full Indication ............................................................................................................................ 8

3.2 Low Level Indications ................................................................................................................. 8

4. Technical Specifications......................................................................................................................... 8

4.1 Tank Size .................................................................................................................................... 8

4.2 Displays...................................................................................................................................... 8

4.3 Audible Alarm ............................................................................................................................ 8

4.4 Max communication distance.................................................................................................... 9

4.5 Wireless Communications ......................................................................................................... 9

4.6 Dimensions (Sensor) .................................................................................................................. 9

4.7 Dimensions (Monitor)................................................................................................................ 9

4.8 Power Supply ............................................................................................................................. 9

4.9 Mains Power Supply (incl.) for Tekelek Eco Oil Monitor ............................................................ 9

4.10 Battery Life ................................................................................................................................ 9

4.11 Max and Min Operation (Sensor)............................................................................................... 9

4.12 Max and Min Operation (Monitor) ............................................................................................ 9

4.13 Hole size for fitting sensor ......................................................................................................... 9

5. Tekelek sensor battery change ............................................................................................................ 10

6. General Product safety, care and user guide lines............................................................................... 10

7. Troubleshooting .................................................................................................................................. 11

8. Notes ................................................................................................................................................... 12

9. Warranty ............................................................................................................................................. 13

10. FCC ID: S6T603......................................................................................................................... 13

Eco Oil Monitor User Manual

2 | Page

9-5935-03

1. Product Information

1.1 Definitions/Glossary

Ullage

The distance from the sensor to the surface of the liquid in the tank

Outlet

The connection on point from which oil is drawn from the tank to feed the boiler. It is typically located 8cm

above the bottom of the tank in one of the sidewalls. Oil below the outlet level is not usable.

Brim-full Tank Capacity

The maximum amount of liquid that can fit in the tank.

Normal Tank Capacity

The maximum amount to which the tank should be filled according to OFTEC and EN standards. Normally 95%

of the Brim-full capacity.

Usable Capacity

The nominal capacity of the tank minus the amount of oil that is below the outlet point. If the oil level falls to

the level of the outlet, the tank is effectively empty.

Matching

The process of uniquely matching the sensor and the Eco Oil Monitor.

Days to Empty (DTE)

A prediction of the number of days in which the oil level will reach the outlet point. The DTE is calculated based

on the recent usage patterns.

Radio Frequency – The tank level measurements are conveyed wirelessly to the Eco Oil Monitor from the

sensor using RF transmissions.

KgCO2

Kilogrammes of Carbon dioxide.

SETUP mode

Used to configure the Eco Oil Monitor for the oil tank.

LEARN mode

Used to match the sensor with the Eco Oil Monitor.

NORMAL mode

For day to day use of the Eco Oil Monitor. This mode displays current and historical information.

CURRENT information

screens

Screens in NORMAL mode that display information about the current status of the amount of oil remaining in

the tank in Litres, as %, and the DTE.

HISTORICAL

information screens

Screens in NORMAL mode that display information about the historical usage of oil in terms of Litres, cost and

environmental impact.

1.2 Introduction

Thank you for selecting the Tekelek Eco Oil Heating Oil Energy Monitor. This revolutionary home energy

monitoring system allows today’s energy and environmentally conscious consumers to monitor and track

their heating oil consumption, its costs, and the heating systems environmental impact through carbon

emissions, on a daily, weekly, monthly, and annual basis.

The Tekelek Eco Oil product from Tekelek Europe Ltd consists of the Tekelek Sensor and the Tekelek Eco Oil

Monitor. The Tekelek Sensor is easily installed on your oil storage tank to measure the level of the oil. It

transmits the oil level information wirelessly to the Tekelek Eco Oil Monitor which may be located in a

convenient location inside your home.

The Tekelek Sensor uses ultrasonic technology to measure the distance from the sensor on top of the tank to

the surface of the liquid in your oil tank. As the amount of oil in your tank decreases, the distance measured

increases accordingly. The distance information or ‘ullage’ is transmitted wirelessly to the Tekelek Eco Oil

Monitor.

Litres and % fuel

Once programmed with information about your oil tank’s shape and size, the Tekelek Eco Oil Monitor

calculates and displays the amount of fuel remaining in your tank in litres or as a percentage of the tank

capacity. In addition (as oil is consumed over time) the Tekelek Eco Oil Monitor calculates and displays

usage information including the average amount of litres used per day, per week, over the last 30 days, and

over the last 365 days.

Eco Oil Monitor User Manual

3 | Page

9-5935-03

Days to Empty (DTE)

As the Tekelek Sensor continuously measures and transmits the oil level, the Tekelek Eco Oil Monitor retains

this information allowing it to ‘learn’ historical heating system usage patterns and so predict the ‘Days to

Empty’ for your home. With this information you can ensure that you order your oil at the correct time –

not too soon, and more importantly, not too late.

Costs

By entering the cost you pay for your oil during the setup process of your Tekelek Eco Oil Monitor and

subsequently when you take deliveries of oil (if the price has changed), the Tekelek Eco Oil can present your

oil usage in terms of its costs, i.e. average cost per day and per week, and the cost for the usage over the last

30 days and 365 days.

Environment

Similarly, the Tekelek Eco Oil Monitor can display your oil usage in terms of the associated production of CO2

emissions, as the equivalent quantity of KgCO2emitted per day, per week, the last 30 days and 365 days.

Installation

The Tekelek Sensor fits into the standard 32mm aperture found on most modern oil storage tanks and is

suitable for use with almost any plastic or metal tank up to 3m tall, including Bunded and Single Skin Oil

tanks. If your tank is a bunded tank, ensure that you mount the Tekelek Sensor on the inner tank.

As part of the installation the Tekelek Sensor and Monitor are ‘synchronised’ together to ensure there is no

interference from other nearby sensors.

Eco Oil Monitor User Manual

4 | Page

9-5935-03

2. Features and Functions

2.1 Features

LCD Display

Error code information

MODE key

Power/data cable

DOWN key

Manufacturing information

ENTER key

Location feature (see Installation Guide)

UP key

USB connector

SETUP key

Mains power plug

Alarm Red LED

Tekelek Eco Oil Transmitter

Screw mount hanger

Self-tapping screws x 2

Beeper aperture

Weather seal (Gasket)

RESET button access

Tekelek Eco Oil Sensor oil level display

2.2 Functions

MODE

When in NORMAL mode press MODE to move between the current and the historical

information screens.



Press UP to move between screens when in NORMAL mode.

Use it to increase a setting when in SETUP mode.

ENTER

The ENTER key is used only in SETUP mode. It is used to save the settings shown on the

display and then move automatically to the next SETUP number.



Press DOWN to move between screens when in NORMAL mode.

Use it to decrease a setting when in SETUP mode.

SETUP

Press SETUP for 3 seconds to enter SETUP. When in SETUP, press SETUP to exit from SETUP

mode.





When in NORMAL mode, by pressing together UP and DOWN and releasing, the screen will

flash the current tank configuration for 20 seconds. Press any key to return to NORMAL

mode.

Eco Oil Monitor User Manual

5 | Page

9-5935-03

2.3 LED

The red light above the ENTER key flashes when there is an Alarm condition (see 3. Alarms) and on receiving

data from the Tekelek Sensor.

2.4 Display – Symbols & Indicators

The Tekelek Eco Oil Monitor contains a display that conveys a variety of information during normal use and

during its initial setup and configuration for use with your oil tank. The display contains three sections (1, 2,

& 3) as indicated in the diagram.

1- Used for SETUP and displays SETUP number, and in normal use displays room temperature.

2- Tank information including a visual bar-graph of the oil level in the tank.

3- Information about the remaining usable oil in litres or as a %, the ‘Days to Empty’, and the average and

cumulative use of oil in litres, cost and KgCO2. Time is also displayed here.

Tekelek Eco Oil Monitor and Sensor Display Symbol reference

TANK TYPE

Indicates the tank type being selected.

A,B,C

A, B, C are types of tank shapes (see Installation Guide).

ROOM

TEMPERATURE

The value displayed is the room temperature.

Numeric display - shows the room temperature in normal mode e.g. 20.

Shows the SETUP mode number when in SETUP mode, e.g. SETUP mode 3

˚C & ˚F

The value displayed is temperature in degrees Celsius/Fahrenheit.

cm\inch

The value displayed is in centimetres/inches.

SETUP

SETUP mode is active.

Eco Oil Monitor User Manual

6 | Page

9-5935-03

The value displayed is the tank height.

The value displayed is the tank width.

Monitor Display:

Bar graph indicator of liquid level - each bar represents 10% of tank height. .

Tekelek Eco Oil Sensor Display:

Tanks 1m/3.3ft. in height or greater - each bar represents 1/10th of the top 1m/3.3ft

of the tank.

Tanks less than 1m/3.3ft. in height - each bar represents 1/10th of 1m/3.3ft

Full

Indicates the ‘Full’ level of the bar graph indicator.

Liquid Level

Indicates the bar graph is showing the liquid level.

EMPTY

Indicates the ‘Empty’ level of the bar graph indicator.

BUND ALARM

When flashing, there has been a leak into the ‘Bund’ (double skinned tanks). The 10

bars and the RED LED will also be flashing at the same time.

TANK LOW

BATTERY

The sensor battery needs to be changed.

Flashing in the monitor—The liquid level in the tank is less than 14cm.

Flashing in the sensor—The liquid level in the tank is less than 10% of the tank

height.

Flashing – There is a problem with the RF signal from the sensor. Refer to

“Troubleshooting” for more details.

Static – Attempt to change the monitor system of measurement (SETUP mode 3)

with the risk of losing saved data.

The temperature of the sensor is measured at –8°C or below — the information

accuracy may be affected.

The value displayed is the % of usable oil remaining in the tank.

cm\inches

The value displayed is in centimetres/inches

Ltr\Gal

The value displayed is in litres/gallons.

USB data activity.

AVERAGE PER

DAY

The value displayed is the average per day based on the last 7 days' usage.

AVERAGE PER

WEEK

The value displayed is the average per week based on the last 14 days' usage.

DAYS TO

EMPTY

The value displayed is the estimated number of days of oil remaining in the tank. It is

computed by dividing the volume of usable oil left in the tank

LAST 30 DAYS

The value displayed is the estimated usage over the last 30 days.

LAST 365 DAYS

The value displayed is the estimated usage over the last 365 days.

Eco Oil Monitor User Manual

7 | Page

9-5935-03

2.5 Display Screens

There are two types of information displayed on the Tekelek Eco Oil Monitor:

CURRENT information screens – used in normal mode to show the current status of the oil level in your tank.

Change between the ‘Ltr.’, ‘%’, ‘Days to empty’, and Clock screens using the and keys.

For approximately 1 week after the Tekelek Eco Oil is installed, it collects data so that the ‘Average per day’

value may be calculated. During this period the screen will flash ‘---‘ when showing ‘Days to empty’. (In the

picture, ‘flashing’ is indicated in red).

After this period, the display may continue to show ‘---‘ (but not flashing). This indicates that a meaningful

value could not be calculated. This may occur in periods when there is no (or extremely low) usage. The ‘---‘

may be displayed in any of the HISTORICAL information screens under these conditions.

This may also happen if the Tekelek Eco Oil Monitor has been unplugged for some time. When sufficient

data has been gathered, the screen will revert to normal after a period from a few hours up to a maximum

of 1 week.

HISTORICAL information screens showing ‘Fuel usage – Litres’, ‘Fuel usage – Cost’ and ‘Fuel Usage – Carbon’.

Pressing MODE and /accesses these screens.

The Tekelek Eco Oil Monitor will automatically return to the CURRENT information screen after 30s with no

key presses within the HISTORICAL information screens. The maximum value displayed is 19999.

Eco Oil Monitor User Manual

8 | Page

9-5935-03

3. Alarms

3.1 Full Indication

When the level in your tank reaches 12 cm from the top of the tank, i.e. from the bottom of the Tekelek

Sensor, the main display will show ‘FULL’.

3.2 Low Level Indications

When the tank level falls to within 14cm of the bottom of the tank the ‘re-fuel’ symbol will flash. When

the tank level is such that there is below 10% of the usable volume of oil left in the tank, the CURRENT

information screen alternates between showing the ‘Ltr.’ (or % or DTE) and ‘Lo’.

If the level, then drops such that there is below 5% of usable oil left:

•‘Lo’ is displayed constantly on the CURRENT information screens.

•The monitor beeps 5 times, repeating every hour, i.e. 10:00, 11:00, 12:00, 13:00, 14:00...

•The RED light flashes.

This continues until there is an oil delivery and the level rises.

4. Technical Specifications

4.1 Tank Size

Min. Depth: 0.5m / 20 inch

Max. Depth: 3m / 118 inch

Max. Tank Volume: 19999Litres / 5,200Gallons

4.2 Displays

Multi-function LCD display including:

•10 bar-graph level indication on both Tekelek Eco Oil Monitor and Sensor

Note: The graph displayed on the sensor only represents the top 1M of the tank contents

•Display of various current and historical values (Tekelek Eco Oil Monitor only)

•Display control with five control buttons

•Red LED for low level indication at 5% or less of usable fuel remaining

4.3 Audible Alarm

Audible alarm sounds every hour on the hour when the tank level is low

Eco Oil Monitor User Manual

9 | Page

9-5935-03

4.4 Max communication distance

Typically, up to 500m/1640feet in normal ‘line of sight’ conditions

4.5 Wireless Communications

915MHz FM transmission (FCC part 15)

433MHz FM transmission (EN300-220)

4.6 Dimensions (Sensor)

140mm x 70mm x 40mm / 5.51’’ x 2.75’’ x 1.57’’

4.7 Dimensions (Monitor)

120mm x 90mm x 50mm / 4.72’’ x 3.54’’ x 1.96’’

4.8 Power Supply

•Tekelek Sensor—3V LiMn cell, CR2450 or CR2430 (Depending on sensor)

•Tekelek Eco Oil Monitor:

oReceiver: 5V DC (40mA)

oBackup battery: 3V LiMn cell, CR2450 or CR2430

4.9 Mains Power Supply (incl.) for Tekelek Eco Oil Monitor

North America: 110V +/- 10% 60Hz, meets UL60950-1

Other: 150V-240V, 50-60 Hz, meets EN60950-1

(Eco Oil Monitor use only—not for use with any other device)

4.10 Battery Life

Tekelek Sensor: 5 years (estimated life)

Tekelek Eco Oil Monitor – Receiver memory back-up battery: 3yr if device is not plugged in

Note: The Eco Oil Monitor contains a small battery to keep time during power cuts. If the device is left

unpowered for an extended period, then the battery will deplete.

4.11 Max and Min Operation (Sensor)

Operating temperature range: -20°C/-4°F to +60°C/140°F

Operating Humidity: 15 - 95% non-condensing

4.12 Max and Min Operation (Monitor)

Operating temperature range: 0°C/32°F to +50°C/122°F

Operating Humidity: 0 - 95% non-condensing

4.13 Hole size for fitting sensor

32mm diameter

Altri manuali per TEK 603

Indice

Altri manuali TEKELEK Strumento di misura

TEKELEK

TEKELEK TEK 603 Manuale utente

TEKELEK

TEKELEK Eco Water Monitor Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente