Tektronix MTS4EA Manuale utente
Instructions
MTS4EAUP
License Upgrade for
MTS4EA Compressed Video ES Analyzer
075-0894-00
*P075089400*
075089400
www.tektronix.com
Copyright ©Tektronix, Inc. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or
suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
HIn North America, call 1-800-833-9200.
HWorldwide, visit www.tektronix.com to find contacts in your area.
MTS4EA License Upgrade Instructions 1
Kit Description
This document describes how to perform the following upgrades on the software
key (dongle) for the Tektronix MTS4EA Compressed Video ES Analyzer:
HPermissions upgrade (add options to existing software)
HFloating license upgrade (add users to existing floating license)
HNode-locked to floating license upgrade (upgrade from single machine
license to single floating license)
An overview of the upgrade process is described on the following page.
Kit Parts List
Quantity Part number Description
1EA 075-0894-00 INSTRUCTIONS; MTS4EAUP LICENSE UPGRADE
1EA N/A FLOPPY DISKETTE, 3.5 INCH DOUBLE SIDED, 1.44 MB;
MTS4EA LICENSE UPGRADE
Kit Description
2MTS4EA License Upgrade Instructions
Upgrade Process Overview
Listed below are the high-level actions required for the various MTS4EA
upgrade scenarios. If you have upgrade problems, refer to Troubleshooting the
License Upgrade Process on page 15.
To upgrade from MTS4EA v3.0 to v4.0 or higher, perform the steps described in
Options Permissions Upgrade Procedure startingonpage3.
To upgrade from MTS4EA v4.0 to v4.x or higher, perform the steps described in
Options Permissions Upgrade Procedure startingonpage3.
To upgrade from a node-locked license (single license for a single machine) to a
single-user floating license, do the following:
HPerform the steps described in Options Permissions Upgrade Procedure
startingonpage3.
HRead the upgrade process described in User License Upgrade starting on
page 5.
HPerform the steps described in Node-locked to Floating License Upgrade
Procedure startingonpage10.
NOTE. If you want to upgrade from a node-locked license to a multiple-user
floating license, you must first upgrade your node-locked license to a single-user
floating license. After you upgrade to a single-user floating license, you can then
upgrade to a multiple-user floating license.
To upgrade from a single-user floating license to a multiple-user floating license,
do the following:
HPerform the steps described in Options Permissions Upgrade Procedure
startingonpage3.
HRead the upgrade process described in User License Upgrade starting on
page 5.
HPerform the steps described in Floating License Upgrade Procedure starting
on page 6.
Upgrading from v3.0
to v4.0 or Higher
Upgrading from v4.0 to
v4.x or higher
Upgrading from
Node-locked License to
Single-user Floating
License
Upgrading from
Single-user Floating
License to Multiple-user
Floating License
MTS4EA License Upgrade Instructions 3
Options Permissions Upgrade
These instructions are for personnel who are familiar with servicing the product.
If you need further details refer to the appropriate product manual. Contact your
nearest Tektronix, Inc., Service Center for installation assistance.
NOTE. Each MTS4EA software key (dongle) contains two sets of permissions:
one for the enabled MTS4EA options, and another for the user licenses. Since
separate processes are used to upgrade the options permissions and the user
licenses stored in the dongle, you can upgrade the options permissions and the
user licenses in any order.
Options Permissions Upgrade Procedure
The software key (dongle) stores the permissions for the enabled MTS4EA
options. The options permissions are upgraded using an update program and an
encrypted data file. Tektronix provides these files either by floppy disk or
CD-ROM with this kit, or by email.
Perform the following steps to upgrade the MTS4EA options permissions:
CAUTION. To prevent an upgrade failure, your computer or Tektronix MPEG
instrument must have the associated MTS4EA software key (dongle) installed.
Be sure that the dongle you are updating is the one you specified in the upgrade
order. The upgrade data file can be applied to the dongle only one time and it
will work only with the dongle specified at the time you ordered the upgrade.
1. If you received your upgrade files via email proceed to step 2. Otherwise,
insert the floppy disk or CD-ROM supplied with this kit into the appropriate
drive on your computer or Tektronix MPEG instrument.
2. Copy the upgrade files from the floppy disk or CD-ROM, or from the email,
to any directory on your computer or Tektronix MPEG instrument.
Options Permissions Upgrade
4MTS4EA License Upgrade Instructions
CAUTION. If the DESkey server is installed and running on the computer or
Tektronix MPEG instrument, you must stop the server service before you run the
executable file in step 3 below. If you do not stop the service, you will get an
error message when you attempt to run the file.
To stop the server service, open the Control Panel (Windows Start > Settings >
Control Panel) and select the DESkey icon, which opens the DESkey Configura-
tion dialog box. In the dialog box, select the Networking tab. Click the Stop
button if the server service is running. The server button will say Start when the
service is not running.
3. From the directory where you copied the upgrade files, run the following
executable file: remoteupdate.exe. The executable file will then use the
accompanying data file to securely change the contents of the dongle
memory to include any new options.
4. If necessary, remove the floppy disk or CD-ROM from the computer or
Tektronix MPEG instrument.
MTS4EA License Upgrade Instructions 5
User License Upgrade
The instructions on the following pages describe how to perform the license
upgrades listed below:
HFloating License Upgrade. Adds more user licenses to an existing floating
license.
HNode-locked to Floating License Upgrade. Converts a node-locked (single
machine) license to a single-user floating license.
User License Upgrade Process
The activities listed below are required to perform the user license upgrade:
1. You create a Customer Update Request File (CURF) and send that file to
Tektronix. The CURF is specific to the dongle on your existing product.
NOTE. The instructions for creating the CURF are described in Generating a
Customer Update Request File (CURF) starting on page 12.
2. Tektronix uses the CURF to create a License Upgrade File (LUF).
3. Tektronix sends you the LUF either on floppy disk or CD-ROM, or by
email.
NOTE. When you receive the upgrade files from Tektronix, you must copy the files
to a single directory on the hard drive of the client machine containing the
installed MTS4EA Compressed Video ES Analyzer used to create the CURF.
4. You apply the LUF to the dongle using the DESkey configuration utility.
NOTE. The instructions for applying the LUF are described in Floating License
Upgrade Procedure starting on page 6.
When the dongle has been upgraded, the LUF will become obsolete.
User License Upgrade
6MTS4EA License Upgrade Instructions
Floating License Upgrade Procedure
Perform the following steps to add user licenses to an existing floating license
dongle:
1. If necessary, copy the upgrade files from the floppy disk or CD-ROM, or
from the email, to a single directory on the hard drive of the client machine.
NOTE. The client machine must contain the installed MTS4EA Compressed Video
ES Analyzer that was used to create the CURF.
2. Ensure that the dongle is installed on the License Server.
3. From the client machine, open the control panel (Start > Settings > Control
Panel).
4. Open DESkey application. In the DESkey Configuration dialog box, select
the Networking tab. The server machine should be listed in the upper panel.
5. Verify that the server service is running. As shown below, the server button
will say Stop when the service is running. If the server button says Start,
click the button to start the service.
User License Upgrade
MTS4EA License Upgrade Instructions 7
6. Select the Monitor button to display the DK2 Network Server Remote
Monitor dialog box.
7. Highlight the server machine in the server list (upper panel) and click the
Admin button. Enter the required password. The default is “deskey”.
8. If the password is correct, the DK2 Network Server dialog box is displayed.
Select the License Request tab.
User License Upgrade
8MTS4EA License Upgrade Instructions
9. Press the Load from File button and locate the License Upgrade File (LUF)
on the hard disk. The upload is complete when data is displayed in the
License Update window.
10. Press the Send Update button to send the LUF to the server.
Indice
Altri manuali Tektronix Strumento di misura
Tektronix
Tektronix PA1000 Manuale utente
Tektronix
Tektronix PA4000 Series Manuale utente
Tektronix
Tektronix TekScope THS 710 Manuale utente
Tektronix
Tektronix P5102 Manuale utente
Tektronix
Tektronix 1502B Manuale utente
Tektronix
Tektronix RSA6100A Series Manuale per l'uso e la cura
Tektronix
Tektronix WFM8200 Manuale per l'uso e la cura
Tektronix
Tektronix VM5000 Series Manuale
Tektronix
Tektronix 82A00 Istruzioni di installazione e manutenzione
Tektronix
Tektronix TTR500 series Manuale utente
Tektronix
Tektronix Keithley 4200A-SCS Manuale utente
Tektronix
Tektronix TLA6402 Istruzioni di installazione e manutenzione
Tektronix
Tektronix RSA5BUP Manuale utente
Tektronix
Tektronix RSA3408B Manuale utente
Tektronix
Tektronix WFM2300 Guida per l'amministratore
Tektronix
Tektronix TDP3500 Manuale per l'uso e la cura
Tektronix
Tektronix TLA7AA1 Manuale utente
Tektronix
Tektronix P6900 Series Manuale utente
Tektronix
Tektronix TLA7AA1 Manuale utente
Tektronix
Tektronix TDP1000TDP1500 Manuale
