Tektronix DS1001G Manuale utente

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

User Manual

DS1001A/DS1001G

Television Demodulators

071-0905-01

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from

defects in materials and workmanship for a period of one (1) year from the date of

shipment. If a product proves defective during this warranty period, Tektronix, at its

option, either will repair the defective product without charge for parts and labor, or will

provide a replacement in exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for

the performance of service. Customer shall be responsible for packaging and shipping

the defective product to the service center designated by Tektronix, with shipping

charges prepaid. Tektronix shall pay for the return of the product to Customer if the

shipment is to a location within the country in which the Tektronix service center is

located. Customer shall be responsible for paying all shipping charges, duties, taxes, and

any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel

other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to

repair any damage or malfunction caused by the use of non-Tektronix supplies; or d) to

service a product that has been modified or integrated with other products when the

effect of such modification or integration increases the time or difficulty of servicing the

product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS

DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY

TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND

EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF

THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE

FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR

HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

DS1001A/DS1001G User Manual i

Table of Contents

General Safety Summary vii.............................

Preface ix............................................

Contacting Tektronix x.................................

Getting Started

Product Description 1--1..................................

Physical Dimensions 1--2..............................

Accessories 1--2.........................................

Standard Accessories 1--2..............................

Optional Accessories 1--2..............................

Electrical Installation 1--4.................................

AC Power Source 1--4.................................

Changing the Mains Voltage 1--4.........................

Power On Procedure 1--4...............................

Mechanical Installation 1--6...............................

Custom Installation 1--7................................

Rackmount Information 1--7............................

Functional Check 1--8....................................

Operating Basics

Functional Overview 2--1.................................

Front-Panel Features 2--1...............................

Rear-Panel Connectors 2--3.............................

Audio Output Connector 2--4...........................

Differences Between DS1001A and DS1001G 2--5.............

Operating Procedures 2--7.................................

Applying Power 2--7..................................

Selecting Display Modes 2--8...........................

System Status 2--8....................................

Audio1 Output Status 2--9..............................

Audio 2 Output Status 2--10.............................

GCR Module Status 2--11...............................

Program Set-up 2--12...................................

Table of Contents

ii DS1001A/DS1001G User Manual

Product Information 2--12...............................

Firmware Revision 2--13................................

Locking/Unlocking the Front Panel 2--13...................

Temperature Status 2--14................................

Selecting a Program 2--14...............................

Adjusting the Current Program 2--15......................

Reference

Configuring Operation 3--1................................

Quick Guide 3--2.....................................

Program Configuration 3--3...............................

Config Program: Frequency Tables 3--4...................

Config Program: Channel 3--4...........................

Config Program: Frequencies 3--5........................

Config Program: ZCP 3--5..............................

Config Program: Signal Source 3--6......................

Config Program: Audio 1 Input Selection 3--7..............

Config Program: Audio 2 Input Selection 3--7..............

Config Program: AFC 3--7.............................

Config Program: Sound Trap 3--8........................

Config Program: BTSC Stereo/SAP Noise Thresholds 3--8....

GCR Module Configuration 3--9............................

Config GCR Module: CFH Interval 3--9...................

Config GCR Module: GCR Bypass 3--10...................

Serial Configuration 3--11..................................

Config Serial: Serial Mode 3--11..........................

Config Serial: Unit Address 3--11.........................

Config Serial: RS232 RTS/CTS Status 3--12.................

Config Serial: RS485 Termination 3--12....................

Frequency Response Configuration 3--13......................

Contrast Adjustment 3--15..................................

User Defined Channel Table 3--16...........................

Appendices

Appendix A: Performance Specifications A--1...............

Appendix B: Remote Control B--1.........................

Serial Port Connection B--1................................

Programming Model B--2.................................

Table of Contents

DS1001A/DS1001G User Manual iii

Addresses B--3.......................................

Remote Operation Flag B--4.............................

Command Types B--4..................................

Sending and Receiving Data B--5...........................

Send Address Phase B--5...............................

Send Data Phase B--6..................................

Receive Address Phase B--7.............................

Polling for Status Messages B--7.........................

Getting a Message B--9................................

Command Syntax B--10....................................

Data Types B--10......................................

Data Offset B--11......................................

Remote Command Descriptions B--12.........................

Appendix C: Service C--1.................................

Packaging for Shipment C--1...............................

Replacing the Fuse C--2...................................

Cleaning the Exterior C--2.................................

Appendix D: Channel Tables D--1..........................

Appendix E: Factory Default Settings E--1..................

Glossary

Index

Table of Contents

iv DS1001A/DS1001G User Manual

List of Figures

Figure 1--1: Rear-panel connectors 1--5.....................

Figure 1--2: Typical system configuration 1--6...............

Figure 2--1: DS1001A/DS1001G front panel 2--1.............

Figure 2--2: DS1001A Rear-panel connectors 2--3............

Figure 2--3: Audio output connector 2--4....................

Figure 2--4: DS1001G Rear-panel connectors 2--5............

Figure B--1: Pin assignments for the SERIAL connector B--2...

Table of Contents

DS1001A/DS1001G User Manual v

List of Tables

Table 1--1: Power Cords 1--3.............................

Table 3--1: Configure menu hierarchy 3--1..................

Table 3--2: Frequency response adjustment bands 3--14........

Table A--1: Video specifications A--1.......................

Table A--2: Audio specifications A--2......................

Table A--3: Electrical specifications -- power requirements A--3.

Table A--4: Environmental characteristics A--3..............

Table A--5: Physical characteristics A--3....................

Table A--6: Certifications and compliances A--4..............

Table A--7: Safety certification and compliance A--5..........

Table A--8: Safety standards A--6..........................

Table B--1: Rear-panel SERIAL port connections B--2........

Table B--2: Special byte codes B--3.........................

Table B--3: Data types used in remote communication B--10....

Table D--1: CATV HRC channel table D--2..................

Table D--2: CATV IRC channel table D--3...................

Table D--3: CATV standard channel table D--5...............

Table D--4: Standard channel table D--7.....................

Table D--5: IRC channel table D--9.........................

Table D--6: HRC channel table D--10........................

Table D--7: Broadcast channel table D--12....................

Table E--1: Program default settings E--1...................

Table E--2: System default settings E--2.....................

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Tektronix Apparecchiature di prova

Tektronix

Tektronix 5000 Series Manuale utente

Tektronix

Tektronix DPScope II Manuale utente

Tektronix

Tektronix 2225 Manuale utente

Tektronix

Tektronix TDS 500C Manuale utente

Tektronix

Tektronix P6042 PROBE Manuale utente

Tektronix

Tektronix 2 Series Manuale di istruzioni

Tektronix

Tektronix TDS 340 Manuale utente

Tektronix

Tektronix TDS3000C Series Manuale utente

Tektronix

Tektronix TDS 410A Manuale utente

Tektronix

Tektronix P6136 Manuale utente

Tektronix

Tektronix TDS1000B Series Manuale utente

Tektronix

Tektronix TG8000 Manuale utente

Tektronix

Tektronix P6247 Manuale utente

Tektronix

Tektronix MSO56 Manuale operativo e di manutenzione

Tektronix

Tektronix TDS2000C series Manuale utente

Tektronix

Tektronix 2225 Manuale utente

Tektronix

Tektronix TPS2014B Manuale utente

Tektronix

Tektronix MDO3000 Series Manuale utente

Tektronix

Tektronix TCP202 Manuale utente

Tektronix

Tektronix 465 Manuale utente

Tektronix

Tektronix MSO70000C Series Manuale utente

Tektronix

Tektronix SC 502 Manuale utente

Tektronix

Tektronix MSO2000 Series Manuale utente

Tektronix

Tektronix P6455 TTL/MOS Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente