Tektronix MDO4104-6 Manuale utente

MDO4000 Series Oscilloscopes and Application Modules

Declassiﬁcation and Security

ZZZ

Instructions

www.tektronix.com

*P077058401*

077-0584-01

or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication

supersedes that in all previously published material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

TekSecure is a trademark of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Table of Contents

Preface.............................................................................................................. iii

Clear and Sanitize Procedures...................... .............. .............................................. ... 1

Memory Devices............................................................................................... 2

Data Export Devices........................................................................................... 4

Sanitizing an Application Module ........ ................................ .................. ................. 5

Built-In Security Features ......................................................................................... 7

Disable the LAN Port and Clear LAN Ethernet Settings..... .............. ............................... 9

Disable the USB Device Port................................................................................ 10

Clear and Sanitize a Nonfunctional Instrument ........ ........................ ........................ ........ 11

MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions i

Table of Contents

ii MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions

Preface

If you have data security concerns, this document helps you to sanitize or

remove memory devices from the Tektronix MDO4000 Series Mixed Domain

Oscilloscopes and Modules.

The MDO4000 Series products have data storage (memory) devices and data

output devices (USB ports). These instructions tell you how to clear or sanitize

the memory devices, and also tell you how to declassify an instrument that is not

functioning.

Instrument code and calibration settings reside in nonvolatile ﬂash memory.

Instrument setups and reference waveforms may also be stored in ﬂashmemoryor

on USB drives connected to the instrument.

If you have any questions, contact the Tektronix Technical Support Center at

www.tektronix.com/support.

Reference The procedures in this document are written to meet the requirements speciﬁed in:

NISPOM, DoD 5220.22–M, Chapter 8

ISFO Process Manual for Certiﬁcation & Accreditation of Classiﬁed Systems

under NISPOM

MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions iii

Preface

Products The following Tektronix products are covered by this document:

Oscilloscopes:

MDO4104-6

MDO4104-3

MDO4054-6

MDO4054-3

MDO4034-3

MDO4014-3

Application Modules:

DPO4AERO

DPO4AUDIO

DPO4AUTO

DPO4AUTOMAX

DPO4COMP

DPO4LMT

DPO4ENET

DPO4PWR

DPO4USB

DPO4VID

MDO4TRIG

iv MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions

Preface

Related documents The Tektronix MDO4000 Series Mixed Domain Oscilloscopes Service

Manual, part number 077-0585-XX, is available on the Tektronix Web site at

www.tektronix.com/manuals.

Terms The followingtermsmaybeusedinthisdocument:

Clear. This removes data on media/memory before reusing it in a secured

area. All reusable memory is cleared to deny access to previously stored

information by standard means of access.

Demo setups. These setups come loaded in the instrument, and cannot be

modiﬁed by the customer.

Erase. This is equivalent to clear.

Instrument Declassiﬁcation. A term that refers to procedures that must be

undertaken before an instrument can be removed from a secure environment.

Declassiﬁcation procedures include memory sanitization and memory

removal, and sometimes both.

Media storage/data export device. Any of several devices that can be used

to store or export data from the instrument, such as a USB port.

Nonvolatile memory. Data is retained when the instrument is powered off.

Power off. Some instruments have a “Standby” mode, in which power is

still supplied to the instrument. For the purpose of clearing data, putting the

instrument in Standby mode does not qualify as powering off. For these

products, you will need to remove the power source from the instrument.

Protected user data area. Contains data that is protected by a password.

Remove. This is a physical means to clear the data by removing the memory

device from the instrument. Instructions are available in the product Service

Manual.

Sanitize. This eradicates the data from media/memory so that the data cannot

be recovered by other means or technology. This is typically used when the

device will be moved (temporarily or permanently) from a secured area to a

nonsecured area.

Scrub. The user is able to directly retrieve the memory device contents.

User-modiﬁable. The user can write to the memory device during normal

instrument operation, using the instrument interface or remote control.

Volatile memory. Data is lost when the instrument is powered off.

MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions v

Preface

vi MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions

Clear and Sanitize Procedures

The following terms are used in the tables in this section:

Type of User Info Stored This column describes the type of user information that is stored in the device:

User data. Waveforms and other measurement data that represent signals

that users connect to the instrument.

User settings. Instrument settings that the user can change.

Both. Both user data and user settings are stored in the device.

None. Neither user data nor user settings are stored in the device.

Method of Modiﬁcation This column indicates the method of modifying data:

Direct. The user can modify the data.

Indirect. The instrument system resources modify the data. The user cannot

modify the data.

User Accessible This column indicates whether the user can retrieve the device contents:

Ye s . The user can directly retrieve the memory device contents.

No. The user cannot retrieve the memory device contents.

To Clear This column tells how to clear data from the media or memory device before

reusing it in a secured area. All reusable memory is cleared to deny access to

previously stored information by standard means of access.

To Sanitize This column tells how to eradicate the data from the media or memory device so

that the data cannot be recovered by other means or technology. This is typically

used when the device will be moved (temporarily or permanently) from a secured

area to a nonsecured area.

MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions 1

Clear and Sanitize Procedures

Memory Devices

The following tables list the volatile and nonvolatile memory devices in the

standard instrument and listed options. Detailed procedures to clear or sanitize

these devices, if any, are shown following each table.

Table 1: Volatile memory devices

Type and

minimum size Function

Type

user

info

stored

Backed

up by

battery

Method

modiﬁcation

Data input

method Location

User

accessible To clear

sanitize

CMOS, SDRAM,

1024Mbit x 8,

8.192Gbits

DDR2, 1.8V,

400MHz

(Effective

800MHz);

MT47H64M16HR-25E

BGA

Contains

waveform

main data

during

operation

Both No Indirect Front panel

control and

oscilloscope input

channels

Main

Acquisition

board

No Remove

power

from the

instrument

for at least

20 seconds

Remove

power

from the

instrument

for at least

20 seconds

CMOS, SDRAM,

64M x 16,

1024 Mb DDR2,

1.8 V, 400 MHz

(Effective

800 MHz);

MT47H64M16HR-25E

Contains

instrument

code and

data during

operation

Both No Indirect Front panel

control and

oscilloscope input

channels. Data

inputs through

USB port and

Ethernet port.

Main

acquisition

board

No Remove

power

from the

instrument

for at least

20 seconds

Remove

power

from the

instrument

for at least

20 seconds

CMOS, SDRAM,

64M x 16,

1024 Mb DDR2,

1.8 V, 400 MHz

(Effective

800 MHz);

MT47H64M16HR-25E

Contains

display

images

during

operation

Both No Indirect Front panel

control and

oscilloscope input

channels.

Main

acquisition

board

No Remove

power

from the

instrument

for at least

20 seconds

Remove

power

from the

instrument

for at least

20 seconds

CMOS, DRAM;

4M X 32,128 Mb,

SDRAM, 3.3 V;

MT48LC4M32B2B\5-7,

90-BALL FBGA

(11 MM X

13 MM), DS4

Contains

code for

digital

waveform

processor

None No Indirect System Main

acquisition

board

No Remove

power

from the

instrument

for at least

20 seconds

Remove

power

from the

instrument

for at least

20 seconds

CMOS, DRAM;

16M x 16,

256 Mb,

SDRAM, 3.3 V;

MT48LC16M16A2TG-8E,

TSOP54

Contains

digital

waveform

acquisition

memory

Both No Indirect Front panel

control and digital

input channels

Main

acquisition

board

No Remove

power

from the

instrument

for at least

20 seconds

Remove

power

from the

instrument

for at least

20 seconds

2 MDO4000 Series Oscilloscopes and Application Modules Declassiﬁcation and Security Instructions

Altri manuali per MDO4104-6

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Tektronix Apparecchiature di prova

Tektronix

Tektronix Keithley 2380-500-30 Manuale utente

Tektronix

Tektronix TBS1000 Series Guida utente

Tektronix

Tektronix DF2 Manuale utente

Tektronix

Tektronix P6247 Manuale utente

Tektronix

Tektronix 310A Manuale utente

Tektronix

Tektronix TLA 700 Series Manuale utente

Tektronix

Tektronix 177 Manuale utente

Tektronix

Tektronix 465 Manuale utente

Tektronix

Tektronix CSA8000 Series Manuale utente

Tektronix

Tektronix TDS3000B Series Manuale utente

Tektronix

Tektronix CA PLUG-IN Manuale utente

Tektronix

Tektronix 324 Manuale utente

Tektronix

Tektronix ST112 Manuale utente

Tektronix

Tektronix 7T11A Manuale utente

Tektronix

Tektronix 2465A Manuale utente

Tektronix

Tektronix P6137 Manuale utente

Tektronix

Tektronix TDS 340 Manuale utente

Tektronix

Tektronix 453 Manuale utente

Tektronix

Tektronix 585 Manuale utente

Tektronix

Tektronix 2 Series Manuale di istruzioni

Tektronix

Tektronix TDS 510A Manuale utente

Tektronix

Tektronix 2236 Manuale utente

Tektronix

Tektronix MDO32 Istruzioni di installazione e manutenzione

Tektronix

Tektronix TU-7 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente