TeleEye RX324_V3 Manuale

``

RX_V3 Series

Video Recording Server

RX324_V3 / RX328_V3 / RX3216_V3

RX364_V3 / RX368_V3 / RX3616_V3

Supplementary Guide

Notice:

Signal Communications Limited reserves the right to make improvements to the product described

in this manual at any time and without notice.

This manual is copyrighted. All rights are reserved. This manual should not be copied, reproduced

or translated in whole or part without prior consent from Signal Communications Limited.

Tele ye is a trademark of Signal Communications Limited and is registered in China, uropean

Communities, Hong Kong, US and other countries.

All other trademarks are the property of their respective owners.

reserved.

Version 1.00.02

Limits of Liability and Disclaimer of Warranty

Signal Communications Limited has taken care in preparation of this manual, but makes no

expressed or implied warranty of any kind and assume no responsibility for errors or omissions. No

liability is assumed for incidental or consequential damages in connection with or arising out of the

use of the information or accessories contained herein.

Features and specifications are subject to change without prior notice.

Table of Contents

1 Introduction 6

1.1.

1.1.1.1.

1.1. Introduction

IntroductionIntroduction

Introduction ................................

................................................................

...............................................................

..............................................................

............................... 6

66

6

1.2.

1.2.1.2.

1.2. Convention Used in This Manual

Convention Used in This ManualConvention Used in This Manual

Convention Used in This Manual ................................

................................................................

...............................................................

..............................................................

............................... 6

66

6

2 Network Setup 7

2.1.

2.1.2.1.

2.1. T

TT

TCP/IP Setup

CP/IP SetupCP/IP Setup

CP/IP Setup................................

................................................................

.............................................................

..........................................................

............................. 7

77

7

2.1.1. TCP/IP Setup Through On Screen Display (OSD) Menu................................................7

2.1.2. TCP/IP Setup Through Network......................................................................................7

A. IP Setup Utility.....................................................................................................................7

B. Web Browser ........................................................................................................................7

2.2.

2.2.2.2.

2.2. Port Mapping Setup

Port Mapping SetupPort Mapping Setup

Port Mapping Setup ................................

................................................................

...................................................

......................................

................... 8

88

8

2.3.

2.3.2.3.

2.3. sureLINK Setup

sureLINK SetupsureLINK Setup

sureLINK Setup................................

................................................................

.........................................................

..................................................

......................... 8

88

8

2.3.1. sureLINK Application......................................................................................................9

2.3.2. sureLINK Modification..................................................................................................12

2.3.3. sureLINK Setup in RX...................................................................................................13

2.4.

2.4.2.4.

2.4. 3G Modem Connection Setup

3G Modem Connection Setup3G Modem Connection Setup

3G Modem Connection Setup ................................

................................................................

..................................

....

.. 14

1414

14

2.4.1. 3G Modem Connection Setup Through OSD Menu......................................................14

2.4.2. 3G Modem Connection Setup Through Network ..........................................................14

2.4.3. Access RX Through 3G Modem....................................................................................15

A. SMS / Event Mode ..............................................................................................................15

B. Startup Mode......................................................................................................................1

3 Local Advanced Operations 16

3.1.

3.1.3.1.

3.1. Schedule Recording (OSD)

Schedule Recording (OSD)Schedule Recording (OSD)

Schedule Recording (OSD) ................................

................................................................

......................................

............

...... 16

1616

16

3.2.

3.2.3.2.

3.2. Pan Til

Pan TilPan Til

Pan Tilt

tt

t Zoom (PTZ) Setting (OSD)

Zoom (PTZ) Setting (OSD) Zoom (PTZ) Setting (OSD)

Zoom (PTZ) Setting (OSD) ................................

................................................................

........................................................

................................................

........................ 18

1818

18

3.2.1. Connection with PTZ Cameras ......................................................................................18

3.2.2. Configure PTZ Cameras Driver and Setting..................................................................18

3.3.

3.3.3.3.

3.3. Install

Install Install

Install

Tele

TeleTele

Tele

Eye RX with Alarm Sensors and Relay Control Port

Eye RX with Alarm Sensors and Relay Control PortEye RX with Alarm Sensors and Relay Control Port

Eye RX with Alarm Sensors and Relay Control Port................................

................................................................

..............................................

............................

.............. 20

2020

20

3.4.

3.4.3.4.

3.4. Event Setting (OSD)

Event Setting (OSD)Event Setting (OSD)

Event Setting (OSD) ................................

................................................................

..................................................

....................................

.................. 4

44

4

3.4.1. Alarm (OSD)....................................................................................................................4

3.4.2. Motion (OSD) ..................................................................................................................5

3.4.3. Video Loss (OSD)............................................................................................................7

3.4.4. Disk Usage Level (OSD) .................................................................................................8

3.4.5. HDD Available (OSD) .....................................................................................................8

3.5.

3.5.3.5.

3.5. Action Setting (OSD)

Action Setting (OSD)Action Setting (OSD)

Action Setting (OSD)................................

................................................................

.................................................

..................................

................. 8

88

8

3.5.1. Recording (OSD) .............................................................................................................8

3.5.2. Switch (OSD)...................................................................................................................9

3.5.3. Dial Back (OSD)..............................................................................................................9

3.5.4. -mail (OSD) .................................................................................................................10

3.5.5. SMS (OSD).................................................................................................................... 11

3.5.6. PTZ (OSD)..................................................................................................................... 11

3.5.7. Buzzer (OSD).................................................................................................................12

3.6.

3.6.3.6.

3.6. Time Synchronization (OSD)

Time Synchronization (OSD)Time Synchronization (OSD)

Time Synchronization (OSD)................................

................................................................

...................................

......

... 12

1212

12

3.7.

3.7.3.7.

3.7. Maintenance Log Backup

Maintenance Log BackupMaintenance Log Backup

Maintenance Log Backup (OSD)

(OSD) (OSD)

(OSD) ................................

................................................................

.............................................................

..........................................................

............................. 13

1313

13

3.8.

3.8.3.8.

3.8. USB keyboard

USB keyboard USB keyboard

USB keyboard (OSD)

(OSD)(OSD)

(OSD) ................................

................................................................

..............................................

............................

.............. 14

1414

14

4 Remote Advanced Operations 15

4.1.

4.1.4.1.

4.1. Schedule Recording (Networ

Schedule Recording (NetworSchedule Recording (Networ

Schedule Recording (Network)

k)k)

k) ................................

................................................................

................................ 15

1515

15

4.2.

4.2.4.2.

4.2. PTZ Setting (Network)

PTZ Setting (Network)PTZ Setting (Network)

PTZ Setting (Network) ................................

................................................................

............................................

........................

............ 16

1616

16

4.2.1. Connection with PTZ Cameras ......................................................................................16

4.2.2. Configure P/T/Z Cameras Driver and Setting................................................................16

4.2.3. PTZ Setting Procedure:..................................................................................................17

4.2.4. {Pan Tilt Zoom Control} Panel Description:.................................................................18

4.2.5. Program Preset Procedure:.............................................................................................20

4.2.6. Recall/ dit Patrol Procedure:.........................................................................................22

4.3.

4.3.4.3.

4.3. Event Setting (Network)

Event Setting (Network)Event Setting (Network)

Event Setting (Network) ................................

................................................................

..........................................

....................

.......... 23

2323

23

4.3.1. Alarm (Network)............................................................................................................23

4.3.2. Motion (Network) ..........................................................................................................23

4.3.3. Video Loss (Network)....................................................................................................27

4.3.4. Disk Usage Level (Network) .........................................................................................27

4.3.5. HDD Available (Network) .............................................................................................28

4.4.

4.4.4.4.

4.4. Action Setting (Network)

Action Setting (Network)Action Setting (Network)

Action Setting (Network) ................................

................................................................

.........................................

..................

......... 29

2929

29

4.4.1. Recording (Network) .....................................................................................................29

4.4.2. Switch (Network)...........................................................................................................29

4.4.3. Dial Back (Network)......................................................................................................30

4.4.4. -mail (Network) ...........................................................................................................31

4.4.5. SMS (Network)..............................................................................................................32

4.4.6. PTZ (Network)...............................................................................................................32

4.4.7. Buzzer (Network)...........................................................................................................33

4.5.

4.5.4.5.

4.5. Time Synchronization (Network)

Time Synchronization (Network)Time Synchronization (Network)

Time Synchronization (Network) ................................

................................................................

.............................................................

..........................................................

............................. 34

3434

34

4.6.

4.6.4.6.

4.6. Maintenance Log Backup

Maintenance Log BackupMaintenance Log Backup

Maintenance Log Backup (Network)

(Network) (Network)

(Network)................................

................................................................

........................................................

................................................

........................ 34

3434

34

5 Appendix 36

5.1.

5.1.5.1.

5.1. Specification

SpecificationSpecification

Specification................................

................................................................

............................................................

........................................................

............................ 36

3636

36

MOD L NO...........................................................................................................................36

Syste

SysteSyste

System configuration, operation, audit trail

m configuration, operation, audit trailm configuration, operation, audit trail

m configuration, operation, audit trail ................................

................................................................

..........................................................

....................................................

.......................... 36

3636

36

External Alarm, Tamper, Video Motion Detection, Video loss, Hard Dis Usage, Hard Dis Failure

........................................................................................................................................................38

Install

Tele

TeleTele

Tele

Eye RX with Alarm Sensors and Relay Control Port

1. Introduction

1 1 Introduction

Tele ye RX Series is a complete portfolio of practical video server utilising our proprietary

SMAC-M compression technology. The RX range offers the balanced combination of

high-quality video, mobility, scalability and cost effectiveness. User can access Tele ye RX

video recording servers through Internet web browser anywhere and anytime.

To access RX series video server smoothly through web browser, there are some requirements

for your operational computer.

PC Requirements:

CPU: Pentium ® Dual-Core 2.2 GHZ or above

RAM: 1 GB or above

HDD: 1GB of free disk space or above

Display: 1024 x 768, true color

OS: MS Windows XP, Vista

Other Requirements:

Java: Sun Microsystems Java 2 runtime Version 1.5.0 or above

I : Windows Internet xplorer Version 6 or above

1 2 Convention Used in This Manual

[ ] On Screen Display (OSD) menu items or buttons in software

Remarks

References

Install

Tele

TeleTele

Tele

Eye RX with Alarm Sensors and Relay Control Port

2. Networ Setup

2 1 TCP/IP Setup

2.1.1. TCP/IP Setup Through On Screen Display (OSD) Menu

1. Press [Menu] button on RX video recording server front panel or remote control, select

[SETUP] 



 [CONNECTION] 



 [TCP/IP]

2. Select “NO” for [Auto IP] if you want to change IP address, mask or gateway

3. Use [↑

↑↑

↑] and [↓

↓↓

↓] buttons to set IP address, mask or gateway.

4. Wait for the system to save the setting

2.1.2. TCP/IP Setup Through Net ork

A. IP Setup Utility

1. Install Tele ye IP Setup Utility software using the bundled CD. .N T framework is needed

for IP Setup Utility operation. You can find .N T framework installer in RX software CD.

2. Run IP Setup Utility

3. Find your RX video recording server according to the series number provided by your

provider.

4. To assign another IP address, mask or gateway, click to uncheck “Obtain an IP address

automatically” and enter the corresponding information.

5. Make sure the gateway is the same as your router.

6. Click on [Apply] to save the changes

B. Web Browser

1. Type in the IP address plus port number (http://IPAddress:Port ) in web browser address bar

or use Tele ye IP Setup Utility to access RX web page

2. Click on [Menu] 



 [Server Setting] , select [Networ ]

Install

Tele

TeleTele

Tele

Eye RX with Alarm Sensors and Relay Control Port

Figure 2-2-1 Networ Settings

3. To assign another IP address, mask or gateway, click to uncheck “Obtain an IP address

automatically” and enter the corresponding information

4. Click on [Apply] to save the changes

2 2 Port Mapping Setup

Port mapping, also called port forwarding or punch-through, enables you to create a permanent

translation entry that maps a protocol port on your gateway machine to an IP address and

protocol port on your private LAN. This process enables you to run a public Internet service on

a machine that is otherwise hidden from the Internet by your gateway.

To access your RX video recording server outside your private LAN, you need to do port

mapping for your RX video recording server. For detail setup procedure please refer to your

router user manual. After finish the port mapping, you can always access your RX video

recording server anywhere by the IP address and port number through web browser. The address

should be in this format: http://IPAddress:Port .

The default port number is 1024.You can use this port number for pop mapping.

2 3 sureLINK Setup

sureLINK technology is available in Tele ye RX which enables you to connect to the video

recording server with broadband dynamic IP Internet connection. If you can only use broadband

dial-up account to connect to the Internet through your computer, sureLINK provides a solution

for sharing the Internet connection between your computer and the video recording server.

sureLINK is a group of additional functions, services and software provided for the transmitter

so as to make it to connect to the Internet in any connection methods. Such function can only be

used if you have applied for this service. After you have done so, you also need to configure the

transmitter to make sureLINK available. This section will help you to configure and use it.

By using of sureLINK technology, the powerful Tele ye RX can work on broadband Internet

economically, a cost effective and convenient remote live video monitoring anytime and

anywhere.

Install

Tele

TeleTele

Tele

Eye RX with Alarm Sensors and Relay Control Port

sureLINK Address

You can apply for a sureLINK address (domain name), such as

www.hkpublic.TeleEye.TeleEye.net, for your video recording server. You can use this name

to login or browse the built-in web server. One of the advantages is that you are not required

to memorize the IP address and port number (e.g. 210.177.50.15 :1024) of the transmitter.

Since the sureLINK address is fixed while the IP address may change periodically (in case

when dynamic IP is used), you do not need to worry about the expiration of the IP address.

The sureLINK address can be used in transmitter web browsing to see live video on

standard web browser (e.g. I , Netscape).

Refreshing Rate

When sureLINK address feature is enabled, your RX video recording server will

periodically update its current IP address to our database to ensure that the sureLINK

address is always forwarded to a valid IP. You can set this update period through OSD

menu or web browser.

2.3.1. sureLINK Application

You can apply for sureLINK by visiting our web site at http://www.Tele ye.com and follow the

steps below:

1. nter http://www.Tele ye.com in your web browser address bar to access our web site.

Click on [Customer Login] button.

Figure 2-2-2 TeleEye Main Page

2. Login the page using your registered name and password. New customers need to sign up

first.

Install

Tele

TeleTele

Tele

Eye RX with Alarm Sensors and Relay Control Port

Figure 2-2-3 Login Page

3. Select “sureLINK Registration”.

Figure 2-2-4 TeleEye Support Page

TeleEye RX324_V3 Manuale

Manuali Server popolari di altre marche