TelVue HyperCaster® User Manual / v6.0 / August 2017 4
Safety Requirements
The following safety instructions apply to TelVue’s server products.
1. Read and follow all warning notices and instructions marked on the product or
included in this manual. Opening or removing covers and/or components may
expose you to dangerous high voltage points or other risks. Qualified personnel
should perform all servicing.
2. The maximum ambient temperature for the server is 90 degrees Fahrenheit. Care
should be given to allow sufficient air circulation or space between units when the
server is installed in a closed or multi-unit rack assembly.
3. Installation of the server in a rack without sufficient airflow can be unsafe.
4. If the server is installed in a rack, the rack should safely support the combined
weight of all equipment it supports.
5. The server’s internal AC power supply input is intended for use with the three-wire
grounding type plug (a plug that has a grounding pin). This is a safety feature. Do
not defeat the purpose of grounding type plugs by modifying the plug or using an
adapter.
6. Do not allow anything to rest on the power cord. Do not locate the product where
persons can walk on or come in contact with the power cord.
7. Determine that the cumulative power requirements of the server plus other
equipment in the rack do not overload the supply circuits and/or wiring.
8. If using a power strip or similar supply, make sure the power requirement of the
chassis, plus the cumulative power draw of any other equipment in the rack, do not
overload the supply circuit.
9. There is danger of explosion if the motherboard battery is incorrectly replaced. A
lithium battery on the server motherboard provides backup power for its internal
clock. The battery has an estimated life expectancy of ten years.
Network and Security
The HyperCaster is a networked digital-video appliance with Ethernet connections and a
number of integrated IP-based services. Prior to powering on your server please read the
getting started document that contains information such as power requirements and instructions
on how to set your IP address. Refer to the Quick Start Guides in the Documentation section of
telvue.com:
TelVue HyperCaster Quick Start Guide or TelVue HyperCaster AIO Quick Start Guide
Core Networking Requirements
© 2017 TelVue Corporation 16000 Horizon Way, Suite 100, Mt. Laurel, NJ 08054
HyperCaster® is a registered trademark of TelVue Corporation 800-885-8886 / http://telvue.com