Terex Genie S-45 Trax Manuale utente
Operator's Manual
S
-
40
T
RA
X
AUS
Australia
S
-
45
T
RA
X
with
Maintenance
Information
Second Edition
First Printing
Part No. 1259841
Operator's Manual Second Edition • First Printing
S-40 TRAX • S-45 TRAX Part No. 1259841
Front Matter
Important
Read, understand and obey these safety rules and
operating instructions before operating this
machine. Only trained and authorized personnel
shall be permitted to operate this machine. This
manual should be considered a permanent part of
your machine and should remain with the machine
at all times. If you have any questions, contact us.
Contact Us:
Internet: www.genielift.com
Contents
Introduction ........................................................... 1
Symbol and Hazard Pictorials Definitions............. 4
General Safety ...................................................... 6
Personal Safety..................................................... 9
Work Area Safety................................................ 10
Legend ................................................................ 19
Controls............................................................... 20
Inspections.......................................................... 26
Operating Instructions......................................... 36
Transport and Lifting Instructions ....................... 46
Maintenance ....................................................... 49
Specifications...................................................... 52
Copyright © 2012 by Terex Corporation
Second Edition: First Printing, October 2014
Genie and "S" are registered trademark of Terex South Dakota,
Inc. in the U.S.A. and many other countries.
These machines comply with
AS1418.10
Second Edition • First Printing Operator's Manual
Introduction
Part No. 1259841 S-40 TRAX • S-45 TRAX 1
Introducti on
Owners, Users and Operators:
Thank you for choosing our machine for your
application. Our number one priority is user safety,
which is best achieved by our joint efforts. We feel
that you make a major contribution to safety if you,
as the equipment users and operators:
1 Comply with employer, job site and
governmental rules.
2 Read, understand and follow the instructions
in this and other manuals supplied with this
machine.
3 Use good safe work practices in a
commonsense way.
4 Only have trained/certified operators,
directed by informed and knowledgeable
supervision, running the machine.
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety
rules—safety and operator’s manuals and
machine decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Operator's Manual Second Edition • First Printing
Introduction
2 S-40 TRAX • S-45 TRAX Part No. 1259841
Hazard Classification
Decals on this machine use symbols, color coding
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
message.
Intended Use
This machine is intended to be used only to lift
personnel, along with their tools and materials to
an aerial work site.
DANGER
WARNING
CAUTION
NOTICE
Second Edition • First Printing Operator's Manual
Introduction
Part No. 1259841 S-40 TRAX • S-45 TRAX 3
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
Operator's Manual Second Edition • First Printing
Symbol and Hazard Pictorials Definitions
4 S-40 TRAX • S-45 TRAX Part No. 1259841
Symbol and Hazard P ictorials Definiti ons
Crush hazard Keep away from
moving parts
Explosion hazard No smoking.
No flame.
Stop engine
Electrocution hazard
Maintain required
clearance
Crush hazard Keep away from path
of moving platform
Fall hazard Keep off this surface.
Tip-over hazard Platform downhill:
1Retract boom.
2Lower boom.
Platform uphill:
1Lower boom.
2Retract boom.
Tip-over hazard Replace tracks with
same tracks.
Tip-over hazard Read the operator’s
manual
Only trained
maintenance
personnel should
access
compartments
Tip-over hazard See serial label for
rated capacity.
Second Edition • First Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. 1259841 S-40 TRAX • S-45 TRAX 5
Lanyard attachment
point
Tracks load Voltage rating for
power to platform
Pressure rating for air
line to platform
Have fire extinguisher
near.
Electrocution hazard Avoid contact Tie-down instructions Read the service
manual
Tie-down instructions Explosion / Burn
hazard
Explosion hazard Do not use ether or
other high energy
starting aids on
machines equipped
with glow plugs
Keep open flames
away.
Fire hazard Weight of welder
reduces capacity
+
+
Operator's Manual Second Edition • First Printing
General Safety
6 S-40 TRAX • S-45 TRAX Part No. 1259841
General Safety
114389
114258
28161
28161
114390
28177
97875
52865
217561
217561
28177
114258
28161
28161 C
Crush Hazard
Contact with moving parts can
result in death or serious
injury.
WARNING
Keep away from moving parts.
Crush Hazard
Death or serious
injury may result
from platform
crushing
personnel
against boom.
WARNING
28177 C
Keep away from
path of moving
platform.
Burn Hazard
Fuel and fumes
can explode
and burn.
DANGER
No smoking. No
flame. Stop
engine.
114258 A
114390
DANGER
DANGER
114389
WARNING
52865 97875
Second Edition • First Printing Operator's Manual
General Safety
Part No. 1259841 S-40 TRAX • S-45 TRAX 7
Operator's Manual Second Edition • First Printing
General Safety
8 S-40 TRAX • S-45 TRAX Part No. 1259841
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Terex Sistema di sollevamento
Terex
Terex Genie GS-1932 XH Manuale utente
Terex
Terex Genie Z-51/30J Manuale di installazione e funzionamento
Terex
Terex Genie Load Lifter Manuale utente
Terex
Terex Genie S-80 XC Series Manuale utente
Terex
Terex Genie GRC-12 Guida all'installazione
Terex
Terex Genie SX-135 XC Manuale utente
Terex
Terex Genie SX -180 Manuale di installazione e funzionamento
Terex
Terex Z-30/20N Manuale utente
Terex
Terex Robot 5000 Manuale di servizio
Terex
Terex Genie Z-45 XC Manuale di installazione e funzionamento
Terex
Terex Genie Z452513A-48153 Manuale di installazione e funzionamento
Terex
Terex Genie GS84D-401 Manuale di installazione e funzionamento
Terex
Terex Genie GS-2669DC Manuale utente
Terex
Terex Genie GRC-12 Manuale utente
Terex
Terex 43032 Manuale utente
Terex
Terex Genie GR-12 Manuale utente
Terex
Terex Genie GS-1530 Manuale utente
Terex
Terex Genie GR Series Manuale utente
Terex
Terex Genie IWP Series Manuale utente
Terex
Terex Genie S-100 Manuale utente
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
