Terex S-60 J Manuale utente
Operator's Manual
Serial Number Range
S®-60 J
from S60JH-101
from S60JD-101
CE
with
Maintenance
Information
Original Instructions
First Edition
Second Printing
Part No. 1283765GT
Operator's Manual First Edition • Second Printing
S®-60 J Part No. 1283765GT
Front Matter
Manufacturer:
Terex South Dakota, Inc.
500 Oakwood Road
Watertown, SD 57201, USA
EU Authorized representative:
Genie Industries B.V.
Boekerman 5
4751 XK OUD GASTEL
The Netherlands
Contents
Introduction........................................................... 1
Symbol and Hazard Pictorials Definitions............. 5
General Safety...................................................... 8
Personal Safety................................................... 11
Work Area Safety................................................ 12
Legend................................................................ 22
Controls............................................................... 23
Inspections.......................................................... 31
Operating Instructions......................................... 44
Transport and Lifting Instructions ....................... 57
Maintenance ....................................................... 60
Specifications...................................................... 64
Copyright © 2018 by Terex Corporation
First Edition: Second Printing, May, 2021
Genie and "S" are registered trademarks of Terex South
Dakota, Inc. in the U.S.A. and many other countries.
Complies with EC Directive 2006/42/EC
See EC Declaration of Conformity
First Edition • Second Printing Operator's Manual
Introduction
Part No. 1283765GT S®-60 J 1
Introduction
About this manual
Genie appreciates your choice of our machine for
your application. Our number one priority is user
safety, which is best achieved by our joint efforts.
This book is an operation and daily maintenance
manual for the user or operator of a Genie
machine.
This manual should be considered a permanent
part of your machine and should remain with the
machine at all times. If you have any questions,
contact Genie.
Product Identification
The machine serial number is located on the serial
label.
Serial label
(located under cover)
Serial number stamped on
chassis
Intended Use and Familiarization
Guide
The intended use of this machine is to lift
personnel, including tools, and materials to an
aerial work site. Before operating the machine, it’s
the operator’s responsibility to read and
understand this familiarization guide.
Each person must be trained to operate a
Mobile Elevating Work Platform (MEWP).
Familiarization with the MEWP must be given
to each person who is authorized, competent
and trained.
Only trained and authorized personnel should
be permitted to operate the machine.
The operator is responsible to read,
understand, and obey the manufacturer’s
instructions and safety rules provided in the
Operator’s Manual.
The Operator’s Manual is located in the
manual storage container, at the platform.
For specific product applications, see
Contacting The Manufacturer.
Operator's Manual First Edition • Second Printing
Introduction
2 S®-60 J Part No. 1283765GT
Platform controls symbology and related
machine movement:
Platform level
Platform rotate
Jib boom up/down
Boom up/down
Boom extend/retract
Turntable rotate
Drive forward/reverse
Steer right/left
Ground controls symbology and related
machine movement:
Platform level, jib boom
up/down, boom
extend/retract,and boom
up/down
Turntable rotate and
platform rotate
Sequential functions and movement:
•Drive and steer.
Interlocked functions:
•Elevated drive speed.
•Elevated drive in an off-level condition.
•Drive enable when the boom is rotated past the
non-steer wheels.
•All platform and ground controls.
Limitations of use:
•The intended use of this machine is to lift
personnel, including tools, and materials to an
aerial work site.
•Do not elevate the platform unless the machine
is on firm level ground.
Stability enhancing means:
•Foam filled tires
Restricted operating envelope:
•Not restricted.
First Edition • Second Printing Operator's Manual
Introduction
Part No. 1283765GT S®-60 J 3
Bulletin Distribution and
Compliance
Safety of product users is of paramount
importance to Genie. Various bulletins are used by
Genie to communicate important safety and
product information to dealers and machine
owners.
The information contained in the bulletins is tied to
specific machines using the machine model and
serial number.
Distribution of bulletins is based on the most
current owner on record along with their
associated dealer, so it is important to register
your machine and keep your contact information
up to date.
To ensure safety of personnel and the reliable
continued operation of your machine, be sure to
comply with the action indicated in a respective
bulletin.
To view any open bulletins for your machine, visit
us on the web at www.genielift.com.
Contacting the Manufacturer
At times it may be necessary to contact Genie.
When you do, be ready to supply the model
number and serial number of your machine, along
with your name and contact information. At
minimum, Genie should be contacted for:
Accident reporting
Questions regarding product applications and
safety
Standards and regulatory compliance information
Current owner updates, such as changes in
machine ownership or changes in your contact
information. See Transfer of Ownership, below.
Transfer of Machine Ownership
Taking a few minutes to update owner information
will ensure that you receive important safety,
maintenance and operating information that
applies to your machine.
Please register your machine by visiting us on the
web at www.genielift.com or by calling us toll free
at 1-800-536-1800.
Operator's Manual First Edition • Second Printing
Introduction
4 S®-60 J Part No. 1283765GT
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety rules—
safety and operator’s manuals and machine
decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may
damage the safety sign material.
Hazard Classification
Decals on this machine use symbols, color coding,
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
message.
First Edition • Second Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. 1283765GT S®-60 J 5
Symbol andHazard Pictorials Definitions
Fire hazard
Explosion hazard
Explosion hazard
Do not use ether or
other high energy
starting aids on
machines equipped
with glow plugs.
No smoking.
No flame.
Stop engine.
Fire extinguisher
No smoking
Explosion hazard
Electrocution
hazard
Maintain required
clearance
Tip-over hazard
Tip-over hazard
Tip-over hazard
Tip-over hazard
Tire specifications
Operator's Manual First Edition • Second Printing
Symbol and Hazard Pictorials Definitions
6 S®-60 J Part No. 1283765GT
Wheel load
Wind speed
Maximum capacity
Manual force
Weight of welder
reduces capacity
Tie-down point
Lifting point
Platform tie-down
instructions
Lifting & tie down
instructions
Lanyard anchorage
points
Corrosive acid.
Color coded
direction arrows
Runaway hazard
Collision hazard
Overhead
obstruction
First Edition • Second Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. 1283765GT S®-60 J 7
Electrocution
hazard
Avoid contact
Disconnect battery
Voltage rating for
power to platform
Pressure rating for
air line to platform
Recovery procedure if tilt alarm sounds
while elevated.
Platform downhill:
1Retract boom.
2Lower boom.
Platform uphill:
1Lower boom.
2Retract boom.
Read the
operator’s manual
Access by trained
and authorized
personnel only
Read the service
manual
Emergency
lowering
Crush hazard
Support the
platform or boom
during
maintenance
Operator's Manual First Edition • Second Printing
General Safety
8 S®-60 J Part No. 1283765GT
GeneralSafety
Altri manuali per S-60 J
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Terex Sistema di sollevamento
Terex
Terex Genie S-40XC Manuale di installazione e funzionamento
Terex
Terex Genie Z-45/25J Bi-Energy Manuale di installazione e funzionamento
Terex
Terex Genie SX-150 Manuale di installazione e funzionamento
Terex
Terex Genie SX-105 XC Manuale utente
Terex
Terex Robot 5000 Manuale di servizio
Terex
Terex Genie QS-12R Manuale utente
Terex
Terex Genie GRC-12 Manuale utente
Terex
Terex GS90D-4695 Manuale di installazione e funzionamento
Terex
Terex SX135H-560 Manuale utente
Terex
Terex Genie GRC-12 Guida all'installazione
Terex
Terex Genie S-45 Trax Manuale utente
Terex
Terex Genie GR-12 Manuale utente
Terex
Terex Genie Z-60/37DC Manuale utente
Terex
Terex Genie GR -12 Manuale utente
Terex
Terex Genie Lift Guard S-60 Manuale utente
Terex
Terex Genie GS-2669DC Manuale utente
Terex
Terex Genie Z452513A-48153 Manuale di installazione e funzionamento
Terex
Terex Genie S-100 Manuale utente
Terex
Terex Genie QS-12W Manuale utente
Terex
Terex GTH08E-11500 Manuale di installazione e funzionamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
