Texas Instruments TI-84 - Plus - Edition Graphing Calculator Manuale utente

Step 4

Step 6

Step 7

Step 8

Your Passion. Our Technology. Student Success.™

TI-84 Plus & TI-84 Plus Silver Edition

Press-to-Test

This feature will delete all RAM and Archive except for the disabled Apps

and Programs when using operating system 2.40 or greater.

SET-UP INSTRUCTIONS

1. Begin with the graphing calculator powered OFF.

2. Hold down both the LEFT and RIGHT arrow keys and press ON –

all three keys simultaneously.

3. Release and the calculator will start with the RESET OPTIONS screen.

4. By default, ANGLE mode is set to DEGREE and STAT DIAGNOSTICS are ON.

To change settings, use the ARROW keys and press

(These are the default settings for the calculator.)

5. Once your selections have been completed, press OK.

(press the ZOOM button located just below the screen).

6. The RESET COMPLETE screen will appear. Press any key to continue.

7. Press the APPS key, which should display an

“APPS HAVE BEEN DISABLED”message.

8. Press the PRGM key, which should display a

“PROGRAMS HAVE BEEN DISABLED”message.

= illustration shown.

RESTORE INSTRUCTIONS ON REVERSE SIDE.

Press-to-Test for TI-84 Plus & TI-84 Plus Silver Edition

Step 2

Step 5

Restore Instructions for Disable Mode

RESTORE OPTION 1

1. Using an I/O unit-to-unit cable or USB cable (which comes with

TI-84 Plus models), connect together two graphing calculators –

at least one of the two units must be “temporarily disabled.”

2. On the Receiver’s unit:

a. Press the 2ND-LINK function to go to the SEND / RECEIVE screen.

b. Highlight RECEIVE but DO NOT press yet.

3. On the Sender’s unit:

a. Press the 2ND-LINK function to go to the SEND / RECEIVE screen.

Send will be highlighted be default.

4. On the Receiver’s unit:

a. Once the receivers unit has been prepared to RECEIVE

(see Step 2), press

5. On the Sender’s unit:

a. Select 4:LIST and press L1*.

Note the arrow that appears next to L1.

b. Highlight TRANSMIT (press RIGHT arrow key) Press on

the receiving calculator rst and then on the sending unit.

c. An on-screen “Waiting” message will appear.

If you select L1 you may be prompted to overwrite the variable.

Select the overwrite option to continue.

6. Upon successful transmission, a DONE message will appear on

both screens. Devices are now restored from the disabled mode

and have full access to previous Apps and Programs.

RESTORE OPTION 2

1. Using an I/O unit-to-unit cable (which comes with the Testing

Solutions Tool Kit), or USB cable (which comes with TI-84 Plus

models), connect together two graphing calculators – at least one

of the two units should be “temporarily disabled.”

2. From the TESTGUARD 2.0 Apps Home Screen select option 4:REENABLE

on the non-disabled unit.

= illustration shown.

* Any le can be selected, we are demostrating with L1.

Press-to-Test for TI-84 Plus & TI-84 Plus Silver Edition (Continued)

Altri manuali per TI-84 - Plus - Edition Graphing Calculator

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Texas Instruments Calcolatrice

Texas Instruments

Texas Instruments -34 II Explorer Plus Manuale utente

Texas Instruments

Texas Instruments TI-84 Plus Silver Edition Manuale utente

Texas Instruments

Texas Instruments TI-84 Plus CE Python Manuale utente

Texas Instruments

Texas Instruments -83 Plus Silver Edion Manuale utente

Texas Instruments

Texas Instruments Titanium TI-89 Manuale utente

Texas Instruments

Texas Instruments TI-73 Explorer Manuale

Texas Instruments

Texas Instruments TI-15 Manuale utente

Texas Instruments

Texas Instruments TI-73 Explorer Guida rapida

Texas Instruments

Texas Instruments TI-Nspire CX II Series Manuale utente

Texas Instruments

Texas Instruments TI-84 - Plus - Edition Graphing Calculator Manuale

Texas Instruments

Texas Instruments -83 Plus Silver Edion Manuale

Texas Instruments

Texas Instruments TI-82 STATS Manuale utente

Texas Instruments

Texas Instruments TI-5660 Manuale

Texas Instruments

Texas Instruments TI-83 - Plus Graphing Calculator Manuale

Texas Instruments

Texas Instruments TI-83 - Plus Graphing Calculator Guida rapida

Texas Instruments

Texas Instruments TI-80 Manuale

Texas Instruments

Texas Instruments TI-5015 Manuale utente

Texas Instruments

Texas Instruments Titanium TI-89 Manuale utente

Texas Instruments

Texas Instruments Little Professor Manuale utente

Texas Instruments

Texas Instruments TI Voyage 200 Manuale utente

Texas Instruments

Texas Instruments TI-nspire CAS Touchpad Manuale utente

Texas Instruments

Texas Instruments TI-Nspire CX II Manuale utente

Texas Instruments

Texas Instruments TI-Nspire Manuale utente

Texas Instruments

Texas Instruments TI-40 College II Manuale utente

Manuali Calcolatrice popolari di altre marche

HP 35s Manuale

Casio

Casio CFX-9970G Manuale utente

LEXIBOOK

LEXIBOOK EL350 Manuale utente

HP HP-97 Manuale utente

Citizen

Citizen SDC-414N Manuale utente

Casio

Casio fx-3800P Manuale utente

Canon

Canon P26-DHIII Manuale utente

Citizen

Citizen 520DPA Manuale utente

Sharp

Sharp EL-9900 Manuale utente

Casio

Casio FX-9860GII - SOFTWARE VERSION 2-00 Manuale utente

Casio

Casio MS-7UC Manuale utente

Sharp

Sharp WriteView EL-W506 Manuale tecnico

Casio

Casio FC-200 Manuale utente

Casio

Casio fx-CG50 Manuale utente

HP HP-67 Guida utente

Royal

Royal CBC2000 Manuale utente

Heathkit

Heathkit IC-2009 Manuale utente

Universal

Universal UNV-15907 Manuale utente