Texas Instruments THS1030/31EVM Manuale utente

THS1030/31EVM Evaluation

Module for the

THS1030/THS1031 10ĆBit

ADC

2000 AAP Data Conversion

User’s Guide

SLAU040

IMPORTANT NOTICE

TexasInstruments andits subsidiaries(TI) reservethe rightto makechanges totheir productsor todiscontinue

any product or service without notice, and advise customers to obtain the latest version of relevant information

to verify, before placing orders, that information being relied on is current and complete. All products are sold

subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those

pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent

TIdeemsnecessarytosupport thiswarranty. Specifictestingofallparameters ofeachdevice isnotnecessarily

performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF

DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL

APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR

WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER

CRITICALAPPLICATIONS.INCLUSIONOFTIPRODUCTSINSUCHAPPLICATIONSISUNDERSTOODTO

BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating

safeguards must be provided by the customer to minimize inherent or procedural hazards.

TIassumes noliabilityforapplicationsassistance orcustomer productdesign. TIdoes notwarrantorrepresent

thatanylicense,eitherexpressorimplied,isgrantedunderanypatentright,copyright,maskworkright,orother

intellectual property right of TI covering or relating to any combination, machine, or process in which such

semiconductor products or services might be or are used. TI’s publication of information regarding any third

party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

How to Use This Manual

iii

Read This First

Preface

Read This First

About This Manual

This manual describes the physical characteristics, functions, modes of op-

eration, and configuration of the THS1030/31EVM evaluation module (EVM).

How to Use This Manual

Chapter 1 – Overview

Chapter 2 – Physical Description

Chapter 3 – Circuit Description

Chapter 4 – Modes of Operation

Running Title—Attribute Reference

Chapter Title—Attribute Reference

Contents

1 Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Purpose 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 EVM Basic Functions 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Power Requirements 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 THS1030/31EVM Operational Procedure 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Physical Description 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 PCB Layout 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Parts LIst 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Circuit Description 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Schematic Diagram 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Circuit Function 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.1 Inputs 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.2 Clock Options 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.3 References 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.4 Power 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.5 Outputs 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2.6 THS1031 Register Write 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Modes of Operation 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Running Title—Attribute Reference

Figures

2–1 Silk Top 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–2 Silk Bottom 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–3 Top 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–4 Inner 1 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–5 Inner 2 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–6 Bottom 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 EVM Schematic Diagram 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–2 EVM Schematic Diagram – DIPS 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–3 EVM Schematic Diagram – LOGIC 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–4 EVM Schematic Diagram – THS1031 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–5 EVM Schematic Diagram – POWER_&_REF 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–1 Common Mode Input VREF/2 – 1Vp-p Input Span (top/bottom mode) 4-2. . . . . . . . . . . . . . . .

4–2 Common Mode Input VREF/2 – 2Vp-p Input Span (top/bottom mode) 4-2. . . . . . . . . . . . . . . .

4–3 External Common Mode Input – 1Vp-p Input Span (center span mode) 4-3. . . . . . . . . . . . . .

4–4 External Common Mode Input – 2Vp-p Input Span (center span mode) 4-3. . . . . . . . . . . . . .

4–5 Differential Input – 1Vp-p Input Span (differential input mode) 4-4. . . . . . . . . . . . . . . . . . . . . . .

4–6 Differential Input – 2Vp-p Input Span (differential input mode) 4-4. . . . . . . . . . . . . . . . . . . . . . .

4–7 External Reference – Input Span and Bias Set by on Board Reference Circuit

(potentiometer P2 sets EXT_T, potentiometer P3 sets EXT_B)

4-5. . . . . . . . . . . . . . . .

Running Title—Attribute Reference

vii

Contents

Tables

2–1 Parts List 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 Output Connector J4 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–1 Board Jumper Settings for Various Modes of Operation 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . .

4–2 Jumper Settings for Clock Options 4-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

viii

1-1

Overview

This chapter gives a general overview of the THS1030/31EVM evaluation

module (EVM), and describes some of the factors that must be considered in

using this module.

Topic Page

1.1 Purpose 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 EVM Basic Functions 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Power Requirements 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 THS1030/31 Operational Procedure 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

Purpose

1-2

1.1 Purpose

The THS1030/31EVM evaluation module (EVM) provides a platform for

evaluation of the THS1030 and THS1031 10-bit analog-to-digital converters

(ADC) under various signal, reference, and supply conditions. Unless stated

explicitly, the functionality described in this user’s guide applies to both

THS1030 and THS1031 devices.

1.2 EVM Basic Functions

Analog input to the THS1030/31 is provided via an external SMA connector.

The input can be configured onboard to be ac, dc, or transformer coupled to

the input of the device.

An external SMA connector is provided on the THS1031 for the clamp input.

This allows external digital control of the ADC’s clamping function. The ADC

can be clamped to either the device reference or to ground via an onboard

jumper.

The EVM provides an external SMA connection for ADC clock input. This can

be configured to be either ac or dc coupled. Space is reserved on the board

for a crystal oscillator to perform this function, and can be populated when re-

quired.

In addition to the internal reference from the THS1030/31 device, options are

providedontheEVMtoallowadjustmentoftheADCreferenceviaanonboard

reference circuit.

Output from the EVM is via a 40-pin header connector. The digital lines from

the THS1030/31 are buffered using the SN74LVCC4245A before going to the

header.ThisallowstheTHS1030/31suppliestobevariedwithoutaffectingthe

output signal levels.

Power connections to the EVM are via 4-mm banana sockets. Separate input

connectors are provided for the analog and digital supply to the device, and

for the reference and output buffer circuits.

The THS1031 has a number of programmable registers that can be pro-

grammed using DIL switches on the EVM.

1.3 Power Requirements

TheEVMhas4dc-powersupplyconnections:5Vfortheoutputbuffers,2.7 V

to 5 V for the analog and digital supplies to the ADC, and 2.7 V to 5 V for the

referencecircuit.Eachofthesesuppliesisindependent,butitshouldbenoted

thattheinputthresholdsoftheADCwillvarydependentonthedigitalandana-

log supply voltages, as per the datasheet specification.

Indice

Altri manuali Texas Instruments Unità di controllo

Texas Instruments

Texas Instruments TPS61020EVM Manuale utente

Texas Instruments

Texas Instruments MCT8316AEVM Manuale utente

Texas Instruments

Texas Instruments OPT8241-CDK-EVM Manuale utente

Texas Instruments

Texas Instruments UCC27624EVM Manuale utente

Texas Instruments

Texas Instruments TRF7960A Manuale utente

Texas Instruments

Texas Instruments ADS1x15V2EVM-PDK Manuale utente

Texas Instruments

Texas Instruments TLC5540 Manuale utente

Texas Instruments

Texas Instruments 2000 series Manuale utente

Texas Instruments

Texas Instruments BQ76905 Manuale utente

Texas Instruments

Texas Instruments TCA7408EVM Manuale utente

Texas Instruments

Texas Instruments TPA6100A2 Manuale utente

Texas Instruments

Texas Instruments TPS65988EVM Manuale utente

Texas Instruments

Texas Instruments AN-2166 LMZ10500 Manuale utente

Texas Instruments

Texas Instruments TAS2563 Manuale utente

Texas Instruments

Texas Instruments TPS40075EVM-001 Manuale utente

Texas Instruments

Texas Instruments 2000 series Manuale utente

Texas Instruments

Texas Instruments bq20z65EVM-001 Manuale utente

Texas Instruments

Texas Instruments TRF7963A Manuale utente

Texas Instruments

Texas Instruments LMZ14201 SIMPLE SWITCHER Manuale utente

Texas Instruments

Texas Instruments INA190EVM Manuale utente

Texas Instruments

Texas Instruments UCC28056EVM-296 Manuale utente

Texas Instruments

Texas Instruments LP8864 Manuale utente

Texas Instruments

Texas Instruments TPA152 Manuale utente

Texas Instruments

Texas Instruments TPS2559EVM-624 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente