Texas Instruments CAPTIVATE-FR2676 Manuale utente

SLAU803–March 2019

Capacitive Touch MSP430FR2676 MCU Board

Getting Started Guide

SLAU803–March 2019

Capacitive Touch MSP430FR2676 MCU Board

This getting started guide provides a brief overview of the CAPTIVATE-FR2676 capacitive touch

processor MSP430FR2676 board. It describes the common use cases for this processor board, introduces

the required tools and hardware that are needed to develop with it, and provides the relevant links to the

detailed CAPTIVATE-FR2676 EVM chapter in the CapTIvate™ Technology Guide.

Contents

1 Introduction .................................................................................................................. 2

1.1 Scope ................................................................................................................ 2

2 Using the CAPTIVATE-FR2676 ........................................................................................... 3

2.1 Required Tools and Hardware .................................................................................... 3

2.2 Prerequisites......................................................................................................... 3

2.3 Out-of-Box Experience............................................................................................. 4

3 Hardware ..................................................................................................................... 4

3.1 Functional Block Diagram ......................................................................................... 4

List of Figures

1 CAPTIVATE-FR2676 Board................................................................................................ 2

2 Hardware Setup.............................................................................................................. 4

3 CAPTIVATE-FR2676 Block Diagram ..................................................................................... 4

Trademarks

CapTIvate, BoosterPack, LaunchPad, MSP430, Code Composer Studio are trademarks of Texas

Instruments.

Apple, macOS are registered trademarks of Apple Inc.

IAR Embedded Workbench is a registered trademark of IAR Systems.

Linux is a registered trademark of Linus Torvalds.

Microsoft, Windows are registered trademarks of Microsoft Corporation.

Introduction

www.ti.com

2SLAU803–March 2019

Submit Documentation Feedback

Capacitive Touch MSP430FR2676 MCU Board

1 Introduction

The CapTIvate MSP430FR2676 MCU board (CAPTIVATE-FR2676) is a simple evaluation board for

evaluating capacitive touch and proximity sensors through the use of plug-in sensor boards (sold

separately). The MCU board has a 20-pin female debug connector for debugging the on-board

MSP430FR2676 CapTIvate MCU and a 48-pin sensor panel connector for connecting to external

capacitive touch sensors. Also included on the MCU board is a partially filled BoosterPack™ plug-in

module header, which enables limited support for the LaunchPad™ kit and BoosterPack module

ecosystem.

Figure 1. CAPTIVATE-FR2676 Board

1.1 Scope

This getting started guide provides a brief overview of the CAPTIVATE-FR2676 MCU board. The full

detailed EVM user's guide is available within the CapTIvate Design Center integrated documentation. The

latest version of the user's guide is also available online in the CapTIvate™ Technology Guide.

www.ti.com

Using the CAPTIVATE-FR2676

SLAU803–March 2019

Capacitive Touch MSP430FR2676 MCU Board

2 Using the CAPTIVATE-FR2676

The CAPTIVATE-FR2676 MCU board is most commonly used with CAPTIVATE-PGMR module and

sensor boards.

2.1 Required Tools and Hardware

The following tools and hardware are required to use the CAPTIVATE-FR2676.

2.1.1 Software

• CapTIvate Design Center tool

The CapTIvate Design Center is the one-stop-shop development environment for CapTIvate touch-

sensing MCUs. In addition to serving as the CapTIvate development graphical user interface, the

design center also contains all of the CapTIvate software examples and relevant technical

documentation. To get the most out of your CAPTIVATE-FR2676, download and install the latest

version of the CapTIvate™ Design Center GUI for MSP430™ Capacitive Sensing MCUs. The

CapTIvate Design Center supports Microsoft®Windows®, Apple®macOS®, and Linux®host

environments. The minimum required CapTIvate Design Center version with CAPTIVATE-FR2676

support is version 1.80.00.00.

• Integrated development environment (IDE)

To program a software example to either a host LaunchPad development kit or the CAPTIVATE-

FR2676, an integrated development environment is required. CapTIvate software examples support TI

Code Composer Studio™ IDE (CCS) and IAR Embedded Workbench®for MSP430 IDE (IAR EW). The

minimum CCS version with support for the MSP430FR2676 MCU is version 8.3. The minimum IAR EW

version is version 7.12.3.

2.1.2 Hardware

•CAPTIVATE-PGMR

This board is required for connecting the CAPTIVATE-FR2676 to a host PC to enable communication

with the CapTIvate Design Center and programming of the onboard MCU. The CAPTIVATE-PGMR is

needed to load code examples other than the out-of-box experience example that comes

preprogrammed on the CAPTIVATE-FR2676.

•CAPTIVATE-PHONE

This board is a simple evaluation sensor board for mutual-capacitance capacitive touch sensors using

a variety of configurations in a real-world application.

•CAPTIVATE-BSWP

This board is a simple evaluation sensor board for self-capacitance capacitive touch sensors in a

variety of configurations

2.2 Prerequisites

• Software Installation

1. Install the CapTIvate Design Center GUI on a Windows, Linux, or macOS computer (note the

requirements).

2. Install a development environment (IDE).

• Hardware Setup

1. Connect the CAPTIVATE-FR2676 MCU module to the CAPTIVATE-PGMR module.

2. Connect the desired sensing panel board to the CAPTIVATE-FR2676 module. The out-of-box

experience uses the CAPTIVATE-BSWP panel.

3. Connect the micro-USB cable to the CAPTIVATE-PGMR programmer PCB and the computer.

4. Verify that LED2 and LED5 (power good LEDs) on the CAPTIVATE-PGMR module illuminate and

that LED4 (HID Bridge enumeration) blinks.

Using the CAPTIVATE-FR2676

www.ti.com

4SLAU803–March 2019

Submit Documentation Feedback

Capacitive Touch MSP430FR2676 MCU Board

Figure 2. Hardware Setup

2.3 Out-of-Box Experience

The CAPTIVATE-FR2676 MCU board is factory-programed with out-of-box code that works with the

CAPTIVATE-BSWP sensor panel board. For details on running the example code, refer to CAPTIVATE-

BSWP Demonstration in the CapTIvate™ Technology Guide.

3 Hardware

For a detailed description of the CAPTIVATE-FR2676 hardware, see the CAPTIVATE-FR2676 hardware

description in the CapTIvate™ Technology Guide.

3.1 Functional Block Diagram

Figure 3 shows the CAPTIVATE-FR2676 functional block diagram.

Figure 3. CAPTIVATE-FR2676 Block Diagram

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, regulatory or other requirements.

These resources are subject to change without notice. TI grants you permission to use these resources only for development of an

application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license

is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you

will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these

resources.

TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with

such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for

TI products.

TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Indice

Altri manuali Texas Instruments Scheda madre

Texas Instruments

Texas Instruments LM5013-Q1EVM Manuale utente

Texas Instruments

Texas Instruments PGA5807A Manuale utente

Texas Instruments

Texas Instruments VCA8613EVM Manuale utente

Texas Instruments

Texas Instruments TMAG5123EVM Manuale utente

Texas Instruments

Texas Instruments ISO1644DWEVM Manuale utente

Texas Instruments

Texas Instruments DLP3010 Manuale utente

Texas Instruments

Texas Instruments TPS552892EVM-111 Manuale utente

Texas Instruments

Texas Instruments BQ27411EVM-G1C Manuale utente

Texas Instruments

Texas Instruments BP-DAC11001EVM Manuale utente

Texas Instruments

Texas Instruments DS90UB954-Q1EVM Manuale utente

Texas Instruments

Texas Instruments bqTESLA bq500414Q Manuale utente

Texas Instruments

Texas Instruments LMH1982 Manuale utente

Texas Instruments

Texas Instruments TPS25990 Manuale utente

Texas Instruments

Texas Instruments TPD3S716-Q1EVM Manuale utente

Texas Instruments

Texas Instruments LMG342XEVM-04X Manuale utente

Texas Instruments

Texas Instruments DCA1000EVM Manuale utente

Texas Instruments

Texas Instruments TPS51385EVM Manuale utente

Texas Instruments

Texas Instruments MSP430FR58 Series Manuale utente

Texas Instruments

Texas Instruments TPS628690EVM-135 Manuale utente

Texas Instruments

Texas Instruments PGA281EVM Manuale utente

Texas Instruments

Texas Instruments BQ2515 EVM Series Manuale utente

Texas Instruments

Texas Instruments XWRL1432BOOST Manuale utente

Texas Instruments

Texas Instruments TPS25984 Manuale utente

Texas Instruments

Texas Instruments TUSB2E22EVM-CAT Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente