TEXIO DCS-1000B SERIES Manuale utente

INSTRUCTION MANUAL

DIGITAL STORAGE OSCILLOSCOPE

DCS-1000B SERIES

DCS-1072B

DCS-1102B

DCS-1054B

DCS-1074B

DCS-1104B

B71-0463-01

■ About a trademark, a registered trademark

A company name and the brand name mentioned in this instruction

manual are the trademark or the registered trademark of each

company or group in each country and region.

■ About this instruction manual

When copying the part or all of contents of this instruction manual,

seek the copyright holder.

In addition, the specifications of the product and the contents of

this instruction manual are subject to change without notice for

improvement. Please check to our website for the latest version.

This manual is the contents as of May 2018.

■ About export

When export or ship the product to overseas, please confirm laws

and regulations about the export.

Table of Contents

USING THE PRODUCT SAFELY...................................................Ⅰ-Ⅴ

1. GETTING STARTED................................................................... 1

1-1. Main Features ...................................................................... 1

1-2. Accessories.......................................................................... 3

Panel Overview ........................................................................... 4

1-2-1. Front Panel........................................................................................ 4

1-2-2. Rear Panel ........................................................................................ 9

1-2-3. Display............................................................................................. 10

1-3. Set Up ................................................................................11

1-3-1. Tilt Stand......................................................................................... 11

1-3-2. Power Up......................................................................................... 12

1-3-3. First Time Use................................................................................. 12

1-3-4. How to Use This Manual ................................................................. 14

1-4. Built-in Help ....................................................................... 18

2. MEASUREMENT...................................................................... 19

2-1. Basic Measurement ............................................................ 19

2-1-1. Channel Activation .......................................................................... 19

2-1-2. Autoset............................................................................................ 20

2-1-3. Run/Stop ......................................................................................... 21

2-1-4. Horizontal Position/Scale................................................................. 22

2-1-5. Vertical Position/Scale..................................................................... 23

2-2. Automatic Measurement...................................................... 24

2-2-1. Measurement Items......................................................................... 24

2-2-2. Add Measurement........................................................................... 27

2-2-3. Remove Measurement.................................................................... 28

2-2-4. Gated mode..................................................................................... 29

2-2-5. Display All mode.............................................................................. 29

2-2-6. High Low Function........................................................................... 30

2-2-7. Statistics.......................................................................................... 31

2-2-8. Reference Levels ............................................................................ 33

2-3. Cursor Measurement .......................................................... 34

2-3-1. Use Horizontal Cursors ................................................................... 34

2-3-2. Use Vertical Cursors ....................................................................... 36

2-4. Math Operation................................................................... 39

2-4-1. Basic Math Overview & Operators .................................................. 39

2-4-2. FFT Overview & Window Functions ................................................ 41

2-4-3. Advanced Math Overview................................................................ 43

2-4-4. Advanced Math Operation............................................................... 44

3. CONFIGURATION.................................................................... 46

3-1. Acquisition ......................................................................... 46

3-1-1. Select Acquisition Mode.................................................................. 46

3-1-2. Show Waveform in XY Mode........................................................... 47

3-1-3. Set the Record Length..................................................................... 49

3-2. Segmented Memory Acquisition (Option).............................. 49

3-2-1. Segments Display ........................................................................... 51

3-2-2. Set the Number of Segments.......................................................... 51

3-2-3. Run Segmented Memory................................................................. 52

3-2-4. Navigate Segmented Memory......................................................... 53

3-2-5. Play Through Each Segment........................................................... 54

3-2-6. Segment Measurement................................................................... 54

3-2-7. Automatic Measurement.................................................................. 54

3-2-8. Segment Info................................................................................... 57

3-2-9. Save Segment................................................................................. 57

3-3. Display............................................................................... 60

3-3-1. Display Waveform as Dots or Vectors............................................. 60

3-3-2. Set the Level of Persistence............................................................ 60

3-3-3. Set the Intensity Level..................................................................... 61

3-3-4. Select Display Graticule .................................................................. 62

3-3-5. Freeze the Waveform (Run/Stop).................................................... 62

3-3-6. Turn Off Menu................................................................................. 63

3-4. Horizontal View .................................................................. 63

3-4-1. Move Waveform Position Horizontally............................................. 63

3-4-2. Select Horizontal Scale ................................................................... 64

3-4-3. Select reference point of the horizontal expansion.......................... 64

3-4-4. Select Waveform Update Mode....................................................... 65

3-4-5. Zoom Waveform Horizontally.......................................................... 65

3-4-6. Play/Pause...................................................................................... 67

3-5. Vertical View (Channel)....................................................... 69

3-5-1. Move Waveform Position Vertically................................................. 69

3-5-2. Select Vertical Scale ....................................................................... 69

3-5-3. Select Coupling Mode..................................................................... 70

3-5-4. Input Impedance.............................................................................. 70

3-5-5. Invert Waveform Vertically............................................................... 70

3-5-6. Limit Bandwidth............................................................................... 71

3-5-7. Expand by Ground/Center............................................................... 71

3-5-8. Select Probe Type........................................................................... 72

3-5-9. Select Probe Attenuation Level....................................................... 73

3-5-10. Set the Deskew............................................................................. 73

3-6. Bus Key Configuration(Option) ............................................ 74

3-6-1. Bus Display ..................................................................................... 74

3-6-2. Serial Bus........................................................................................ 75

3-6-3. Threshold Configuration.................................................................. 82

3-7. Trigger ............................................................................... 89

3-7-1. Trigger Type Overview.................................................................... 89

3-7-2. Trigger Parameter Overview ........................................................... 91

3-7-3. Setup Holdoff Level......................................................................... 94

3-7-4. Setup Trigger Mode......................................................................... 95

3-7-5. Using the Edge Trigger.................................................................... 95

3-7-6. Using Advanced Delay Trigger........................................................ 96

3-7-7. Using Pulse Width Trigger............................................................... 97

3-7-8. Using Video Trigger......................................................................... 98

3-7-9. Pulse Runt trigger............................................................................ 99

3-7-10. Using Rise and Fall Trigger......................................................... 100

3-7-11. Using the Timeout Trigger........................................................... 101

3-7-12. Using the Bus Trigger (Option).................................................... 102

3-7-13. Bus Trigger Mode........................................................................ 109

3-8. Search (Option).................................................................110

3-8-1. Configuring Search Events............................................................ 110

3-8-2. Copying Search Event To/From Trigger Events............................ 111

3-8-3. Search Event Navigation............................................................... 112

3-8-4. Save Search Marks....................................................................... 112

3-8-5. Setting/Clearing Single Search Events.......................................... 113

3-8-6. FFT Peak....................................................................................... 113

3-9. System Settings and Miscellaneous Settings.......................116

3-9-1. Select Menu Language.................................................................. 116

3-9-2. View System Information............................................................... 116

3-9-3. Erase Memory............................................................................... 117

3-9-4. Probe Compensation Frequency................................................... 117

4. Applications ............................................................................118

4-1. Overview...........................................................................118

4-2. Running Applications .........................................................118

4-3. Using Go-NoGo .................................................................119

4-4. Using the DVM (Option) .....................................................123

4-5. Using the Data Logger (Option) ..........................................124

4-6. Using the Digital Filter (Option) ..........................................126

4-7. Remote Disk......................................................................127

5. SAVE/RECALL........................................................................130

5-1. File Format/Utility ..............................................................130

5-1-1. Image File Format......................................................................... 130

5-1-2. Waveform File Format................................................................... 130

5-1-3. Spreadsheet File Format............................................................... 131

5-1-4. Setup File Format.......................................................................... 132

5-2. Create/Edit Labels .............................................................134

5-3. Save .................................................................................136

5-3-1. File Type/Source/Destination ........................................................ 136

5-3-2. Save Image................................................................................... 136

5-3-3. Save Waveform............................................................................. 138

5-3-4. Save Setup.................................................................................... 139

5-4. Recall ...............................................................................141

5-4-1. File Type/Source/Destination ........................................................ 141

5-4-2. Recall Default Panel Setting.......................................................... 141

5-4-3. Recall Waveform........................................................................... 143

5-4-4. Recall Setup.................................................................................. 144

5-5. Reference Waveforms........................................................145

5-5-1. Recall and Display Reference Waveforms.................................... 145

6. FILE UTILITIES ......................................................................147

6-1-1. File Navigation............................................................................... 147

6-1-2. Create Folder ................................................................................ 148

6-1-3. Rename File.................................................................................. 149

6-1-4. Delete File or Folder...................................................................... 150

6-1-5. Copy File to USB........................................................................... 150

6-1-6. Installing Optional Apps and Functions......................................... 151

7. HARDCOPY............................................................................152

7-1-1. Printer I/O Configuration................................................................ 152

7-1-2. Print Output................................................................................... 152

7-1-3. Save - Hardcopy Key..................................................................... 153

8. REMOTE CONTROL ...............................................................155

8-1-1. Configure USB Interface................................................................ 155

8-1-2. Configure the Ethernet Interface ................................................... 155

8-1-3. Configure Socket Server ............................................................... 157

8-1-4. USB Functionality Check............................................................... 158

8-1-5. Socket Server Functionality Check................................................ 158

9. MAINTENANCE ......................................................................163

9-1-1. How to use SPC function............................................................... 163

9-1-2. Vertical Accuracy Calibration......................................................... 163

9-1-3. Probe Compensation..................................................................... 164

10. APPENDIX............................................................................166

10-1. FAQ ................................................................................166

10-2. Updating the Firmware .....................................................168

10-3. SPECIFICATIONS............................................................169

10-3-1. Model Specifications.................................................................... 169

10-3-2. Common Specifications............................................................... 169

10-3-3. Probe Specifications.................................................................... 172

10-4. DIMENSIONS ..................................................................173

USING THE PRODUCT SAFELY

■Preface

To use the product safely, read this instruction manual to the end.

Before using this product, understand how to correctly use it.

If you read this manual but you do not understand how to use it, please

ask us or your local dealer. After you read this manual, save it so that

you can read it, anytime as requied.

■Pictorial indication

This instruction manual and product show the warning and caution items

required to safely use the product. The following pictorial indication and

warning character indication are provided.

Some part of this product or the instruction

manual may shows this pictorial indication. In

this case, if the product is incorrectly used in that

part, a serious danger may be brought about on

the user’s body or the product.

To use the part with this pictorial indication, be

sure to refer to this instruction manual.

WARNING

If you use the product, ignoring this indication,

you may get killed or seriously injured. This

indication shows that the warning item to avoid

the danger is provided.

CAUTION

If you incorrectly use the product, ignoring this

indication, you may get slightly injured or the

product may be damaged. This indication shows

that the caution item to avoid the danger is

provided.

Please be informed that we are not responsible for any damages to the user

or to the third person, arising from malfunctions or other failures due to

wrong use of the product or incorrect operation, except such responsibility

for damages as required by law.

USING THE PRODUCT SAFELY

WARNING

CAUTION

■Do not remove the product’s covers and panels

Never remove the product’s covers and panels for any purpose.

Otherwise, the user’s electric shock or fire may be incurred.

■Warning on using the product

Warning items given below are to avoid danger to user’s body and life and

avoid the damage or deterioration of the product.

Use the product, observing the following warning andcaution items.

■Warning items on power supply

●Power supply voltage

The rated power supply voltages of the product are 100, 120, 220

and 240VAC. The rated power supply voltage for each product

should be confirmed by reading the label attached on the back of

the product or by the “rated” column shown in this instruction manual.

The specification of power cord attached to the products is rated to

125VAC for all products which are designed to be used in the

areas where commercial power supply voltage is not higher than

125VAC. Accordingly, you must change the power cord if you want

to use the product at the power supply voltage higher than 125VAC.

If you use the product without changing power cord to 250VAC

rated one, electric shock or fire may be caused.

When you used the product equipped with power supply voltage

switching system, please refer to the corresponding chapter in the

instruction manuals of each product.

●Power cord

(Important) The attached power cord set can be used for this

device only.

If the attached power cord is damaged, stop using the product and

call us or your local dealer. If the power cord is used without the

damage being removed, an electric shock or fire may be caused.

●Protective fuse

If an input protective fuse is blown, the product does not operate. For a

product with external fuse holder, the fuse may be replaced. As for

how to replace the fuse, refer to the corresponding chapter in this

instruction manual.

If no fuse replacement procedures are indicated, the user is not

permitted to replace it. In such case, keep the case closed and

consult us or your local dealer. If the fuse is incorrectly replaced, a

fire may occur.

III

USING THE PRODUCT SAFELY

■Warning item on Grounding

If the product has the GND terminal on the front or rear panel surface,

be sure to ground the product to safely use it.

■Warnings on Installation environment

●Operating temperature and humidity

Use the product within the operating temperature indicated in the

“rating” temperature column. If the product is used with the vents of

the product blocked or in high ambient temperatures, a fire may occur.

Use the product within the operating humidity indicated in the “rating”

humidity column. Watch out for condensation by a sharp humidity

change such as transfer to a room with a different humidity. Also, do

not operate the product with wet hands. Otherwise, an electric shock

or fire may occur.

●Use in gas

Use in and around a place where an inflammable or explosive gas or

steam is generated or stored may result in an explosion and fire. Do

not operate the product in such an environment.

Also, use in and around a place where a corrosive gas is generated or

spreading causes a serious damage to the product. Do not operate

the product in such an environment.

●Installation place

Avoid installing the product on inclined places or on places subject to

vibration. Otherwise, the product may slip or fall down to cause

damages or injury accidents.

■Do not let foreign matter in

Do not insert metal and inflammable materials into the product from its

vent and spill water on it. Otherwise, electric shock or fire may occur.

■Warning item on abnormality while in use

In abnormal situations, such as “smoke”, “fire”, “abnormal smell” or

“irregular noise” occur from the product while in use, stop using the

product, turn off the switch, and remove the power cord plug from the

outlet. After confirming that no other devices catch fire, ask us or your

local dealer.

USING THE PRODUCT SAFELY

■Warning Item for the Measurement

●When you measure a part of a high voltage, be careful not to touch a

hand to a measurement part directly. There is a risk of an electric shock.

●Be sure to connectthe probe or the cable and the groundside of the input

connector to the ground potential (ground) of the substance measured.

Since the chassis of this instrument is connected to the ground of the

input block, connecting the earth lead of the probe to the potential

floating from the ground potential may result in the following:

Electric shock

A high current flows and damages the substance measured, this

instrument, and other connected device.

The following parts are connected to the chassis:

Probe for each channel and ground side of the input BNC connector

Grounding conductor of the accessory 3-core power cord

Ground pin for an interface signal

“Bad example” Prohibition

When measuring the floating potential, a differential method of

measurement is recommended ( refer to the figure below ).

“Good example”

At connecting as Bad

Example, +90V and chassis

are shorted, and damages

substance a measured.

Therefore do not make such

connection.

If the instrument is not

grounded, a potential of the

chassis is +90V.

Ground a chassis, in order to

prevent an electric shock

accident.

Setting of panel switches of an

oscilloscope

CH2 INV: ON (CH2 inverted)

ADD : ON (CH1+CH2)

Grounding

Oscilloscope

Earth Lead

Probe

Grounding

Oscilloscope

Grounding

Earth Lead

Probe

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TEXIO Apparecchiature di prova

TEXIO

TEXIO DCS-4605 Manuale del proprietario

TEXIO

TEXIO DCS-9730 Manuale utente

TEXIO

TEXIO STW-9000 Series Manuale utente

TEXIO

TEXIO DCS-7500A Series Manuale del proprietario

TEXIO

TEXIO DCS-4605 Manuale utente

TEXIO

TEXIO PC-26 Manuale utente

TEXIO

TEXIO DCS-2000E SERIES Manuale del proprietario

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente