TEXIO DCS-4605 Manuale utente

INSTRUCTION MANUAL

DIGITAL STORAGE OSCILLOSCOPE

DCS-4605

B71-0392-01

■ About a trademark, a registered trademark

A company name and the brand name mentioned in this instruction

manual are the trademark or the registered trademark of each

company or group in each country and region.

■ About this instruction manual

When copying the part or all of contents of this instruction manual,

seek the copyright holder.

In addition, the specifications of the product and the contents of

this instruction manual are subject to change without notice for

improvement. Please check to our website for the latest version.

Table of Contents

USING THE PRODUCT SAFELY.................................................Ⅰ-Ⅴ

1. GETTING STARTED......................................1

1-1. Main Features .............................................. 1

1-2. Panel Overview ............................................ 3

1-2-1. Front Panel...................................................................3

1-2-2. Rear Panel ...................................................................6

1-2-3. Display..........................................................................7

1-3. Setting up the Oscilloscope........................... 8

2. QUICK REFERENCE ................................... 11

2-1. Menu Tree and Shortcuts .............................11

2-1-1. Acquire key.................................................................11

2-1-2. CH1/CH2 key .............................................................12

2-1-3. Cursor key 1/2............................................................12

2-1-4. Cursor key 2/2............................................................13

2-1-5. Display key.................................................................13

2-1-6. Autoset key.................................................................14

2-1-7. Hardcopy key .............................................................14

2-1-8. Help key .....................................................................14

2-1-9. Horizontal menu key ..................................................14

2-1-10.Math key 1/2 (+/-).......................................................15

2-1-11.Math key 2/2 (FFT).....................................................15

2-1-12.Measure key...............................................................16

2-1-13.Run/Stop key..............................................................16

2-1-14.Save/Recall key 1/9 ...................................................17

2-1-15.Save/Recall key 2/9 ...................................................17

2-1-16.Save/Recall key 3/9 ...................................................18

2-1-17.Save/Recall key 4/9 ...................................................18

2-1-18.Save/Recall key 5/9 ...................................................18

2-1-19.Save/Recall key 6/9 ...................................................19

2-1-20.Save/Recall key 7/9 ...................................................19

2-1-21.Save/Recall key 8/9 ...................................................20

2-1-22.Save/Recall key 9/9 ...................................................20

2-1-23.Trigger key 1/5 ...........................................................21

2-1-24.Trigger key 2/5 ...........................................................21

2-1-25.Trigger key 3/5 ...........................................................22

2-1-26.Trigger key 4/5 ...........................................................22

2-1-27.Trigger key 5/5 ...........................................................23

2-1-28.Utility key 1/10 (Utility #1)..........................................23

2-1-29.Utility key 2/10 (Utility #2) ..........................................24

2-1-30.Utility key 3/10 (Utility #3) ..........................................24

2-1-31.Utility key 4/10 (Hardcopy -Save All).........................24

2-1-32.Utility key 5/10 (Hardcopy -Save Image)...................25

2-1-33.Utility key 6/10 (Probe compensation).......................25

2-1-34.Utility key 7/10 (Go-NoGo).........................................25

2-1-35.Utility key 8/10 (Data Logging 1/2).............................26

2-1-36.Utility key 9/10 (Data Logging 2/2).............................26

2-1-37.Utility key 10/10 (Self CAL Menu)..............................26

2-1-38.Default Settings..........................................................27

2-2. Built-in Help................................................ 28

3. MEASUREMENT ......................................... 29

3-1. Basic Measurements................................... 29

3-1-1. Activating a channel...................................................29

3-1-2. Using Autoset.............................................................30

3-1-3. Running and stopping the trigger...............................31

3-1-4. Changing the horizontal position and scale...............32

3-1-5. Changing the vertical position and scale...................33

3-1-6. Using the probe compensation signal .......................34

3-2. Automatic Measurements ............................ 36

3-2-1. Measurement items ...................................................36

3-2-2. Automatically measuring the input signals ................38

3-3. Cursor Measurements ................................. 39

3-3-1. Using the horizontal cursors......................................39

3-3-2. Using the vertical cursors...........................................40

3-4. Math Operations ......................................... 41

3-4-1. Overview ....................................................................41

3-4-2. Adding, subtracting or multiplying signals .................42

3-4-3. Using the FFT function...............................................43

3-5. Go No-Go Testing ....................................... 44

3-5-1. Overview ....................................................................44

3-5-2. Edit: NoGo When.......................................................44

3-5-3. Edit: Source................................................................45

3-5-4. Edit: NoGo Violation Conditions ................................45

3-5-5. Edit: Template (boundary) .........................................46

3-5-6. Run Go-NoGo Tests..................................................50

3-6. Data Logging .............................................. 51

3-6-1. Overview ....................................................................51

3-6-2. Edit: Source................................................................51

3-6-3. Edit: Setup Parameters..............................................52

3-6-4. Run Data logging .......................................................53

4. CONFIGURATION ....................................... 54

4-1. Acquisition ..................................................54

4-1-1. Selecting the acquisition mode..................................54

4-1-2. Real time vs Equivalent time sampling mode............56

4-2. Display........................................................56

4-2-1. Selecting vector or dot drawing..................................56

4-2-2. Accumulating the waveform.......................................57

4-2-3. Adjusting the display contrast ....................................57

4-2-4. Selecting the display grid...........................................58

4-3. Horizontal View ...........................................58

4-3-1. Moving the waveform position horizontally................58

4-3-2. Selecting the horizontal scale....................................59

4-3-3. Selecting the waveform update mode .......................59

4-3-4. Zooming the waveform horizontally...........................60

4-3-5. Viewing waveforms in the X-Y mode.........................61

4-4. Vertical View (Channel)................................62

4-4-1. Moving the waveform position vertically....................62

4-4-2. Selecting the vertical scale ........................................62

4-4-3. Selecting the coupling mode......................................62

4-4-4. Inverting the waveform vertically................................63

4-4-5. Limiting the waveform bandwidth...............................64

4-4-6. Probe attenuation level and type ...............................64

4-5. Trigger ........................................................65

4-5-1. Trigger type................................................................65

4-5-2. Trigger parameter ......................................................65

4-5-3. Configuring the edge trigger ......................................67

4-5-4. Configuring the video trigger......................................68

4-5-5. Configuring the pulse width trigger ............................70

4-5-6. Manually triggering the signal....................................71

4-6. Remote Control Interface .............................72

4-7. Control with the “FreeWave” .........................73

4-7-1. System requirements.................................................73

4-7-2. Icon.............................................................................73

4-7-3. Connect screen..........................................................74

4-7-4. Image screen..............................................................75

4-7-5. Data screen................................................................76

4-7-6. Command screen.......................................................77

4-8. System Settings ..........................................78

4-8-1. Viewing the system information.................................78

4-8-2. Selecting the language...............................................78

5. SAVE/RECALL............................................ 79

5-1. File Structures ............................................ 79

5-1-1. Display image file format............................................79

5-1-2. Waveform file format..................................................79

5-1-3. Setup file format.........................................................81

5-1-4. Using the USB file utilities..........................................82

5-2. Quick Save (HardCopy)............................... 84

5-3. Save .......................................................... 85

5-3-1. File type/source/destination.......................................85

5-3-2. Saving the panel settings...........................................86

5-3-3. Saving the waveform .................................................87

5-3-4. Saving the display image...........................................88

5-3-5. Saving all....................................................................88

5-4. Recall......................................................... 90

5-4-1. File type/source/destination.......................................90

5-4-2. Recalling the default panel settings...........................90

5-4-3. Recalling a reference waveform to the display..........91

5-4-4. Recalling panel settings.............................................92

5-4-5. Recalling a waveform.................................................93

6. MAINTENANCE........................................... 94

6-1. Vertical Resolution Calibration..................... 94

6-2. Probe Compensation................................... 95

7. APPENDIX .................................................. 97

7-1. Fuse Replacement ...................................... 97

7-2. DCS-4605 Specifications............................. 98

7-2-1. Common specifications..............................................98

7-2-2. Probe Specifications................................................100

7-3. Dimensions................................................101

7-4. FAQ ..........................................................102

USING THE PRODUCT SAFELY

■Preface

To use the product safely, read this instruction manual to the end.

Before using this product, understand how to correctly use it.

If you read this manual but you do not understand how to use it, please

ask us or your local dealer. After you read this manual, save it so that you

can read it, anytime as requied.

■Pictorial indication

This instruction manual and product show the warning and caution items

required to safely use the product. The following pictorial indication and

warning character indication are provided.

Some part of this product or the instruction manual

may shows this pictorial indication. In this case, if the

product is incorrectly used in that part, a serious

danger may be brought about on the user’s body or

the product.

To use the part with this pictorial indication, be sure to

refer to this instruction manual.

WARNING

If you use the product, ignoring this indication, you

may get killed or seriously injured. This indication

shows that the warning item to avoid the danger is

provided.

CAUTION

If you incorrectly use the product, ignoring this

indication, you may get slightly injured or the product

may be damaged. This indication shows that the

caution item to avoid the danger is provided.

Please be informed that we are not responsible for any damages to the user or

to the third person, arising from malfunctions or other failures due to wrong

use of the product or incorrect operation, except such responsibility for

damages as required by law.

USING THE PRODUCT SAFELY

WARNING

CAUTION

■Do not remove the product’s covers and panels

Never remove the product’s covers and panels for any purpose.

Otherwise, the user’s electric shock or fire may be incurred.

■Warning on using the product

Warning items given below are to avoid danger to user’s body and life and

avoid the damage or deterioration of the product.

Use the product, observing the following warning andcaution items.

■Warning items on power supply

●Power supply voltage

The rated power supply voltages of the product are 100, 120, 220 and

240VAC. The rated power supply voltage for each product should be

confirmed by reading the label attached on the back of the product or

by the “rated” column shown in this instruction manual.

The specification of power cord attached to the products is rated to

125VAC for all products which are designed to be used in the areas

where commercial power supply voltage is not higher than 125VAC.

Accordingly, you must change the power cord if you want to use the

product at the power supply voltage higher than 125VAC. If you use

the product without changing power cord to 250VAC rated one,

electric shock or fire may be caused.

When you used the product equipped with power supply voltage

switching system, please refer to the corresponding chapter in the

instruction manuals of each product.

●Power cord

(Important) The attached power cord set can be used for this

device only.

If the attached power cord is damaged, stop using the product and call

us or your local dealer. If the power cord is used without the damage

being removed, an electric shock or fire may be caused.

●Protective fuse

If an input protective fuse is blown, the product does not operate. For a

product with external fuse holder, the fuse may be replaced. As for

how to replace the fuse, refer to the corresponding chapter in this

instruction manual.

If no fuse replacement procedures are indicated, the user is not

permitted to replace it. In such case, keep the case closed and consult

us or your local dealer. If the fuse is incorrectly replaced, a fire may

occur.

III

USING THE PRODUCT SAFELY

■Warning item on Grounding

If the product has the GND terminal on the front or rear panel surface, be

sure to ground the product to safely use it.

■Warnings on Installation environment

●Operating temperature and humidity

Use the product within the operating temperature indicated in the “rating”

temperature column. If the product is used with the vents of the product

blocked or in high ambient temperatures, a fire may occur.

Use the product within the operating humidity indicated in the “rating”

humidity column. Watch out for condensation by a sharp humidity

change such as transfer to a room with a different humidity. Also, do not

operate the product with wet hands. Otherwise, an electric shock or fire

may occur.

●Use in gas

Use in and around a place where an inflammable or explosive gas or

steam is generated or stored may result in an explosion and fire. Do not

operate the product in such an environment.

Also, use in and around a place where a corrosive gas is generated or

spreading causes a serious damage to the product. Do not operate the

product in such an environment.

●Installation place

Avoid installing the product on inclined places or on places subject to

vibration. Otherwise, the product may slip or fall down to cause

damages or injury accidents.

■Do not let foreign matter in

Do not insert metal and inflammable materials into the product from its vent

and spill water on it. Otherwise, electric shock or fire may occur.

■Warning item on abnormality while in use

In abnormal situations, such as “smoke”, “fire”, “abnormal smell” or

“irregular noise” occur from the product while in use, stop using the product,

turn off the switch, and remove the power cord plug from the outlet. After

confirming that no other devices catch fire, ask us or your local dealer.

USING THE PRODUCT SAFELY

■Warning Item for the Measurement

●When you measure a part of a high voltage, be careful not to touch a hand

to a measurement part directly. There is a risk of an electric shock.

●Be sure to connectthe probe or the cableand theground side of the input

connector to the ground potential (ground) of the substance measured.

Since the chassis of this instrument is connected to the ground of the

input block, connecting the earth lead of the probe to the potential

floating from the ground potential may result in the following:

Electric shock

A high current flows and damages the substance measured, this

instrument, and other connected device.

The following parts are connected to the chassis:

Probe for each channel and ground side of the input BNC connector

Grounding conductor of the accessory 3-core power cord

Ground pin for an interface signal

“Bad example” Prohibition

When measuring the floating potential, a differential method of

measurement is recommended ( refer to the figure below ).

“Good example”

At connecting as Bad

Example, +90V and chassis

are shorted, and damages

substance a measured.

Therefore do not make such

connection.

If the instrument is not

grounded, a potential of the

chassis is +90V.

Ground a chassis, in order to

prevent an electric shock

accident.

Setting of panel switches of an

oscilloscope

CH2 INV: ON (CH2 inverted)

ADD : ON (CH1+CH2)

Grounding

Oscilloscope

Earth Lead

Probe

Grounding

Oscilloscope

Grounding

Earth Lead

Probe

Altri manuali per DCS-4605

Indice

Altri manuali TEXIO Apparecchiature di prova

TEXIO

TEXIO DCS-1000B SERIES Manuale utente

TEXIO

TEXIO DCS-4605 Manuale del proprietario

TEXIO

TEXIO DCS-2000E SERIES Manuale del proprietario

TEXIO

TEXIO DCS-9730 Manuale utente

TEXIO

TEXIO DCS-7500A Series Manuale del proprietario

TEXIO

TEXIO PC-26 Manuale utente

TEXIO

TEXIO STW-9000 Series Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente