Themis RES-12DCX Manuale utente

Indice

Manuali Server popolari di altre marche

HP

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente

User Manual

User Manual

Two Intel Dual-Core/Quad-Core 64-bit Xeon CPUs / 1RU Server

PCI-Express & PCI-X Slots / Gigabit Ethernet / Serial ATA (SATA)

Serial-Attached SCSI (SAS) / RAID / IDE-EIDE / Floppy / VGA / USB

RES-12DCX

RES-12DCX

Installation

Manual

Installation

Manual

2 Intel Dual-Core/Quad-Core 64-bit Xeon CPUs / 1RU Server

RES-12DCX

RES-12DCX

2 Intel Dual-Core/Quad-Core 64-bit Xeon CPUs / 1RU Server

RES-12DCX

RES-12DCX

2 Intel Dual-Core/Quad-Core 64-bit Xeon CPUs / 1RU Server

RES-12DCX

RES-12DCX

2 Intel Dual-Core/Quad-Core 64-bit Xeon CPUs / 1RU Server

RES-12DCX

RES-12DCX

2 Intel Dual-Core/Quad-Core 64-bit Xeon CPUs / 1RU Server

RES-12DCX

RES-12DCX

Themis Computer—Rest of World

5 Rue Irene Joliot-Curie

38320 Eybens, France

Phone +33 476 14 77 80

Fax +33 476 14 77 89

Themis Computer—Americas and Pacific Rim

47200 Bayside Parkway

Fremont, CA 94538

Phone (510) 252-0870

Fax (510) 490-5529

World Wide Web http://www.themis.com

RES-12DCXInstallationManual

Version 1.1—March 2008

Copyright © 2008 Themis Computer, Inc.

ALL RIGHTS RESERVED. No part of this publication may be reproduced in any form, by

photocopy, microfilm, retrieval system, or by any other means now known or hereafter invented without

the prior written permission of Themis Computer.

The information in this publication has been carefully checked and is believed to be accurate. However,

Themis Computer assumes no responsibility for inaccuracies. Themis Computer retains the right to

make changes to this publication at any time without prior notice. Themis Computer does not assume

any liability arising from the application or use of this publication or the product(s) described herein.

RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the United States Government

is subject to the restrictions set forth in DFARS 252.227-7013 (c)(1)(ii) and FAR 52.227-19.

TRADEMARKS and SERVICEMARKS

Themis®is a registered trademark of Themis Computer, Inc.

Intel® is a registered trademark of Intel Corporation.

Xeon™is a trademark of Intel Corporation.

ATI™is a trademark of Advanced Micro Devices, Inc. (AMD)

Intersil®is a registered trademark of Intersil Americas Inc.

Red Hat®is a registered trademark of Red Hat, Inc.

Linux®is a registered trademark of Linus Torvalds.

All other trademarks, servicemarks, or registered trademarks used in this publication are the property of

their respective owners.

RES-12DCX Installation Manual, Version 1.1

March 2008

Part Number: 115298-024

Themis Customer Support

North America, South America, and Pacific Rim

Telephone: 510-252-0870

Fax: 510-490-5529

E-mail: support@themis.com

Web Site: http://www.themis.com

iii

Themis Computer

RES-12DCX Installation Manual

VersionRevisionHistory

Version 1.1......................................................................................... March 2008

• Modified Table 1-1, page 1-4, to include DC power supplies.

• Modified Table 1-2, page 1-11, to define Overheat/Fan Fail LED function.

• Added a section (German) on Safety Instructions before the Table of Contents.

• Assorted minor edits and changes throughout the manual.

Version 1.0..................................................................................... February 2008

iv Themis Computer

RES-12DCX Installation Manual

Safety Instructions

To maximize user safety and ensure correct device operation, all instructions con-

tained in this section should be read carefully.

• The device must be used in accordance with the instructions for use.

• Electrical installations in the room must correspond to the requirements of

respective regulations.

• Take care that there are no cables, particularly mains cables, in areas where

persons can trip over them.

• Do not use a mains connection in sockets shared by a number of other power

consumers. Do not use an extension cable.

• Only use the mains cable supplied.

• The unit is completely disconnected from the power source only when the

power cord is disconnected from the power source. Therefore the power cord

and its connectors must always remain easily accessible.

• Do not set up the device in the proximity of heat sources or in a damp location.

Make sure the device has adequate ventilation.

• All plugs on the connection cables must be screwed or locked to the chassis

housing.

• The device is designed to be used in horizontal position only.

• The device is no longer safe to operate when

— the device has visible damage or

— the device no longer functions.

• In these cases, the device must be shut down and secured against unintentional

operation.

• Repairs may only be carried out by a person authorized by Themis Computer.

Caution: It is important that the user observe all warnings and instructions that are

on the device and contained in this manual.

v

Themis Computer

RES-12DCX Installation Manual

• The device may only be opened for the installation and removal of extension

(PCI) cards, memory modules, hard-disk drives, fan housings, power supplies

(RES-22 and RES-32 systems only), and the lithium battery—all in accordance

with the instructions given in this manual.

• If extensions are made to the device, the legal stipulations and the device spec-

ifications must be observed.

• The device must be switched off when removing the top cover; for example,

before installing extension (PCI) cards.

Operation of Laser Source Devices

DVD/CD-ROM drives contain laser light-emitting diodes (classified in accordance

with IEC 825-1:1993: LASER CLASS 1) and, therefore, must not be opened.

If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do

not allow yourself to be exposed to this radiation.

The laser system meets the code of Federal Regulations 21 CFR,1040 for the USA

and Canadian Radiation Emitting Devices Act, REDR C 1370.

Electrostatic Discharge (ESD)

A sudden discharge of electrostatic electricity can destroy static-sensitive devices

or micro-circuitry. Proper packaging and grounding techniques are necessary pre-

cautions to prevent damage. Always take the following precautions:

1. Transport boards in static-safe containers such as boxes or bags.

2. Keep electrostatic-sensitive parts in their containers until they arrive at static-

free stations.

3. Always be properly grounded when touching a sensitive board, component, or

assembly.

4. Store electrostatic-sensitive boards in protective packaging or on conductive

foam.

vi Themis Computer

RES-12DCX Installation Manual

Grounding Methods

Guard against electrostatic damage at workstations by following these steps:

1. Cover workstations with approved anti-static material. Provide a wrist strap

connected to a work surface and properly grounded tools and equipment.

2. Use anti-static mats, heel straps, or air ionizers to give added protection.

3. Handle electrostatic-sensitive components, boards, and assemblies by the case

or the PCB edge.

4. Avoid contact with pins, leads, or circuitry.

5. Turn off power and input signals before inserting and removing connectors or

test equipment.

6. Keep the work area free of non-conductive materials such as ordinary plastic as-

sembly aids and Styrofoam.

7. Use field service tools, such as cutters, screwdrivers, and vacuums that are con-

ductive.

8. Always place drives and boards PCB-assembly-side down on the foam.

Instructions for the Lithium Battery

RES systems are equipped with a lithium battery installed on the motherboard. To

replace this battery, please observe the instructions that are described in this man-

ual.

Warning: There is a danger of explosion when the wrong type of battery is used as

a replacement.

vii

Themis Computer

RES-12DCX Betriebshandbuch

Auszug aus RES-12DCX Betriebshandbuch:

Sicherheitshinweise

Hersteller: Themis Computer

47200 Bayside Parkway

Fremont, CA 94538, U.S.A.

Tel.-Nr. 001-510-252-0870

Fax-Nr. 001-510-490-5529

Allgemeine Bezeichnung: Rechner-Arbeitsplatz

Handelsname/Typenbezeichnung: RES-12DCX (Rugged Enterprise Server)

Typ-Identikatoren: RES-12DCX Server, IR

RES-12DCX Server, RC/CC

Deutsche Version Nr. 01/2008 vom 20.03.2008

viii Themis Computer

RES-12DCX Betriebshandbuch

Sicherheitshinweise

Lesen Sie im Interesse Ihrer eigenen Sicherheit und des bestimmungsgemäßen

Gebrauchs diesen Abschnitt sorgfältig durch.

•Das Gerät darf nur entsprechend der Gebrauchsanweisung verwendet wer-

den.

•Die elektrische Installation im Raum muss den geltenden Vorschriften entspre-

chen.

•Kabel (insbesondere Netzkabel) dürfen nicht in Bereichen verlegt werden, in

denen Personen darüber stolpern können.

•Für den Netzanschluss dürfen keine Verteilerdosen benutzt werden, an die

noch andere Stromverbraucher angeschlossen sind. Verwenden Sie keine

Verlängerungskabel.

•Verwenden Sie nur das mitgelieferte Netzkabel.

•Die vollständige Trennung des Gerätes von der Netzspannung ist nur gewähr-

leistet, wenn das Netzkabel vom Netz getrennt wird. Aus diesem Grund muss

das Netzkabel samt seinen Anschlüssen jederzeit leicht zugänglich sein.

•Das Gerät darf nicht in der Nähe von Wärmequellen oder an einem feuchten

Ort aufgestellt werden. Achten Sie auf eine ausreichende Belüftung des

Gerätes.

•Alle Stecker an den Verbindungskabeln müssen am Gehäuse festgeschraubt

oder festgeklemmt sein.

•Das Gerät darf nur in horizontaler Lage betrieben werden.

•Die Betriebssicherheit des Gerätes ist nicht mehr gewährleistet, wenn

— das Gerät sichtbare Beschädigungen aufweist oder

— das Gerät nicht mehr funktioniert.

•In diesen Fällen muss das Gerät ausgeschaltet und gegen unbeabsichtigte

Inbetriebnahme gesichert werden.

Achtung: Die Warnungen und Hinweise auf dem Gerät und in dieser Anleitung

sind unbedingt zu beachten.