THORLABS PM200 Manuale utente

Optical Power and Energy Meter

PM200

Operation Manual

2012

Version:

Date:

1.0.1

08.02.2012

Foreword

Contents

1 General Information 4

41.1 Safety

51.2 Ordering Codes and Accessories

71.3 Requirements

71.3.1 Hardware Requirements

71.3.2 Software Requirements

71.3.3 Interface Requirements

2 Installation 8

82.1 Parts List

92.2 Operating Elements

102.3 Getting Started

3 Operating Instruction 11

123.1 Attenuation Correction

123.2 Wavelength Correction

143.3 Bandwidth

143.4 Range Control

153.5 Measurement Views

153.5.1 Numeric View

163.5.1.1 Subpanels

193.5.2 Needle View

193.5.3 Graph and Statistics Display

213.5.4 Calculator

223.5.5 File Manager

233.6 Zoom

233.7 Delta

233.8 Zeroing

243.9 Min/Max Marker Reset

243.10 Additional Measurement Settings

253.11Settings

263.12 Analog Output

263.13 Auxiliary Input and Output

263.14 Charging the Battery

273.15 Sensor Dependent Functions

273.15.1 Photodiode Sensors

293.15.2 Thermal Sensors

313.15.3 Pyroelectric Sensors

343.16 Application Note

4 Computer Interface 39

394.1 PM200 Utility Software

434.2 PM200 Software Update

444.3 Using the Instrument Drivers

444.4 PM200 SCPI Commands

444.4.1 An Introduction to the SCPI language

494.4.2 IEEE488.2 Common Commands

494.4.2.1 Command Summary

504.4.2.2 Command Reference

514.4.2.3 PM200 specific SCPI Command Reference

584.4.3 Simple LabVIEW Example using SCPI commands

5 Maintenance and Service 62

625.1 Troubleshooting

6 Appendix 63

636.1 Sensor Connector Pinning

646.2 Technical Data

676.3 Certifications and Compliances

686.4 Warranty

696.5 Copyright

706.6 Thorlabs 'End of Life' Policy (WEEE)

716.7 Listings

716.7.1 List of Acronyms

726.7.2 Thorlabs Worldwide Contacts

We aim to develop and produce the best solution for your application

in the field of optical measurement technique. To help us to live up to

your expectations and improve our products permanently we need

your ideas and suggestions. Therefore, please let us know about

possible criticism or ideas. We and our international partners are

looking forward to hearing from you.

Thorlabs GmbH

WARNING

Sections marked by this symbol explain dangers that might result in

personal injury or death. Always read the associated information

carefully, before performing the indicated procedure.

Please read these advices carefully!

This manual also contains "NOTES" and "HINTS" written in this form.

ATTENTION

Paragraphs preceeded by this symbol explain hazards that could

damage the instrument and the connected equipment or may cause

loss of data.

NOTE

PM200

1 General Information

The PM200 Handheld Optical Power and Energy Meter is designed to measure

the optical power of laser light or other monochromatic or near monochromatic

light sources and the energy of pulsed light sources.

The space-saving, battery powered design and compatibility to all Thorlabs “C-

Series” Photodiode, Thermal, Pyroelectric sensors, and custom Photodiode,

Thermal and Pyroelectric detectors, combined with a fast USB device interface

open a wide range of applications in Manufacturing, Quality Control, Quality

Assurance, and R&D for stationary and field use.

The provided software, including drivers and applications for LabVIEW and C

makes it easy to integrate the instrument in test and measurement systems.

The PM200 can be operated through its auto-detecting position sensor and the

rotatable kick-stand in both a bench-top style landscape view and a hand-held

style portrait view.

Please refer to the user manual on the data carrier supplied with the unit for

detailed function description.

1.1 Safety

Attention

All statements regarding safety of operation and technical data in this instruction

manual will only apply when the unit is operated correctly as it was designed for.

The power meter PM200 must not be operated in explosion endangered

environments!

All modules, sensors and externally connected devices must only be operated

with properly shielded connection cables.

Only with written consent from Thorlabs may changes to single components be

carried out or components not supplied by Thorlabs be used.

Do not remove covers!

This precision device is only serviceable if properly packed into the complete

original packaging including the plastic foam sleeves. If necessary, ask for a

replacement package.

1 General Information

1.2 Ordering Codes and Accessories

Order Code

Description

PM200

Handheld Power/Energy Meter Console

Photodiode Power Sensors:

Order Code

Type

Detector

Aperture

Wavelength

Power

S120C

Compact Sensor

9.5

400 - 1100

50n - 50m

S120VC

Compact Sensor

UV-Si

9.5

200 - 1100

50n - 50m

S121C

Compact Sensor

9.5

400 - 1100

500n - 500m

S122C

Compact Sensor

9.5

700 - 1800

50n - 40m

S130C

Slim Sensor

Dual Range

9.5

400 - 1100

5n - 5m

500n - 500m

S130VC

Slim Sensor

Dual Range

UV-Si

9.5

200 - 1100

5n - 5m

50n - 50m

S132C

Slim Sensor

Dual Range

9.5

700 - 1800

1200 - 1800

5n - 5m

500n - 500m

S140C

Integr. Sphere (1”)

5.0

350 - 1100

1µ - 500m

S144C

Integr. Sphere (1”)

InGaAs

5.0

800 - 1700

1µ - 500m

S142C

Integr. Sphere (2”)

350 - 1100

10µ - 20

S145C

Integr. Sphere (2”)

InGaAs

800 - 1700

1µ - 3

S145C

Integr. Sphere (2”)

InGaAs

800 - 1700

10µ - 20

S150C

Fiber Head

3.6 x 3.6

350 - 1100

100p - 5m

S151C

Fiber Head

3.6 x 3.6

400 - 1100

1n - 20m

S154C

Fiber Head

InGaAs

2.0

700 - 1700

100p - 5m

S155C

Fiber Head

InGaAs

2.0

700 - 1700

1n – 20m

PM200

Thermal Power Sensors:

Order Code

Type

Aperture

Wavelength

Power

S302C

Thermally Stabilized

Thermal Absorber

190 - 25000

100µ - 2

S310C

Thermal Surface Absorber

190 - 25000

10m - 10

S314C

Thermal Surface Absorber

190 - 10600

10m - 60

S322C

Thermal Surface Absorber

190 - 10600

100m - 250

S350C

Thermal Surface Absorber

Excimer Coating

190 - 1100

and 10600

10m - 60

S370C

Thermal Volume Absorber

for high peak power lasers

400 - 5200

10m - 15

Pyroelectric Energy Sensors:

Order Code

Type

Aperture

Wavelength

Energy

ES111C

Pyroelectric Sensor with

broadband coating

185 - 25000

10µ - 150m

ES120C

Pyroelectric Sensor with

broadband coating

185 - 25000

100µ - 500m

ES145C

Pyroelectric Sensor with

broadband coating

185 - 25000

500µ - 2

ES220C

Pyroelectric Sensor with

ceramic coating

185 - 25000

500µ - 3

ES245C

Pyroelectric Sensor with

ceramic coating

185 - 25000

1m -15

Please visit our homepage http://www.thorlabs.com for various accessories like

fiber adapters, posts and post holders, data sheets and further information.

1 General Information

1.3 Requirements

1.3.1 Hardware Requirements

CPU:1 GHz or higher

RAM:256 MB

Graphic card with at least 32 MB memory

Hard disc with at least 100 MB free storage space

free USB2.0 port

USB cable according the USB 2.0 specification

1.3.2 Software Requirements

Operating System:

Windows ® XP (32-bit) SP3

Windows ® Vista (32-bit, 64-bit)

Windows ® 7 (32-bit, 64-bit)

VISA runtime (version 5.0.3 or higher)

1.3.3 Interface Requirements

A free USB2.0 port is required.

PM200

2 Installation

2.1 Parts List

Inspect the shipping container for damage.

If the shipping container seems to be damaged, keep it until you have inspected

the contents and you have inspected the PM200 mechanically and electrically.

Verify that you have received the following items within the package:

1. PM200 power/energy meter console

2. Desktop power supply (5 VDC / 2.4 A)

3. Power cord according to local power supply

4. USB cable (USB Type A Connector to Mini USB Connector)

5. Cable 3.5 mm Audio Connector to Flying Leads for analog output

6. Adapter for the auxiliary connector in the top panel

7. USB memory stick (Flash Drive 1 GB) with instrument drivers, user

application and operation manual

8. Quick Reference

9. Certificate of Calibration

Optional Accessories

Environmental Measurement Module (Displays Temperature and Relative

Humidity)

Fiber Inspection Camera Module (Monochrome Fiber Inspection Camera

with Power Measurement Capability

Altri manuali per PM200

Indice

Altri manuali THORLABS Strumento di misura

THORLABS

THORLABS M2MS Manuale utente

THORLABS

THORLABS PM100D Manuale utente

THORLABS

THORLABS VEGA Series Manuale utente

THORLABS

THORLABS S2011 Manuale utente

THORLABS

THORLABS HRS015B Manuale utente

THORLABS

THORLABS HRP350 Manuale utente

THORLABS

THORLABS CCS Series Manuale utente

THORLABS

THORLABS PM300 Manuale utente

THORLABS

THORLABS BP209-VIS Manuale utente

THORLABS

THORLABS vytran PTR406 Manuale utente

THORLABS

THORLABS TSP01 Manuale utente

THORLABS

THORLABS PDA100A Manuale utente

THORLABS

THORLABS ERM100 Manuale utente

THORLABS

THORLABS PM100 Manuale utente

THORLABS

THORLABS PM100A Manuale utente

THORLABS

THORLABS Chromatis Manuale utente

THORLABS

THORLABS INTUN TL 1550-T Manuale utente

THORLABS

THORLABS SA200 Series Manuale utente

THORLABS

THORLABS TLX3 Manuale utente

THORLABS

THORLABS upLED Manuale utente

THORLABS

THORLABS PM160T Manuale utente

THORLABS

THORLABS ELL10(K) Manuale utente

THORLABS

THORLABS TIBERIUS Manuale utente

THORLABS

THORLABS Redstone OSA305 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente