TierTime UP mini 3 Manuale utente

UP mini 3

User Manual

V 1

https://www.tiertime.com

Index

1 Safety and Printing Environment ......................................................................................... 3

1.1 Safety Precautions .................................................................................................. 3

1.2 Printing Environment ................................................................................................... 3

1.3 One Year Warranty ........................................................................................................ 4

1.4Compliance ................................................................................................................. 4

2 Product Introduction .............................................................................................................. 5

2.1 UP mini 3 ...................................................................................................................... 5

2.2 Main Structure ............................................................................................................... 5

3 Printer Installation ................................................................................................................... 6

3.1 Install Filament Spool Holder ........................................................................................ 6

3.2Install Air Filter ................................................................................................................ 6

3.3Install Build Plate ......................................................................................................... 7

3.4 Cable Connection ......................................................................................................... 8

3.5 Initialize Printer ............................................................................................................... 8

3.6 Calibrate Printer ........................................................................................................... 9

3.7 Install Filament ............................................................................................................ 9

4 Software Installation and Printing ........................................................................................... 12

4.1 Download and Install the UP Studio Software .............................................................. 12

4.2 Software Interface ......................................................................................................... 13

4.3 Touchscreen Interface ................................................................................................... 14

4.4 Load 3D Models ............................................................................................................ 14

4.5 Print Models ................................................................................................................ 16

4.6 Print Progress (Touchscreen) ....................................................................................... 17

4.7 Change Filament during Printing ................................................................................... 18

4.8 Resume Printing after Power Outage ............................................................................ 19

4.9 Repeat Print Jobs / Print Saved Jobs ........................................................................... 19

5 Printer Initialization .................................................................................................................. 21

5.1 Printer Initialization ....................................................................................................... 21

5.2 Filament Settings .......................................................................................................... 22

5.2.1 Filament Install (Touchscreen) ............................................................................. 23

5.2.2 Install Filament (UP Studio software) .................................................................. 24

5.2.3 Withdraw Filament (Touchscreen) ....................................................................... 25

5.2.4 Withdraw Filament (UP Studio)............................................................................. 26

5.2.5 Set 3rd Party Filament Printing Parameters ........................................................ 28

5.3 WiFi Connection ............................................................................................................ 32

5.3.1 WiFi Settings (Touchscreen) ................................................................................ 32

5.3.2 WiFi Settings (UP Studio) ..................................................................................... 34

5.4 Printer Calibration .......................................................................................................... 36

5.4.1 Printer Auto Calibration (Touchscreen) ................................................................ 36

5.4.2 Auto Calibration (UP Studio) ............................................................................... 37

5.4.3 Manual Calibration and Nozzle Height Adjustment ............................................. 38

5.4.4 Manual Calibration of Nozzle Height ................................................................... 41

5.5 Printer Settings .............................................................................................................. 45

5.6 Language Settings and Factory Settings ...................................................................... 46

5.7 Error Messages ............................................................................................................. 47

6 UP Studio2.x Software Features ............................................................................................ 48

6.1 Rotate ............................................................................................................................ 48

6.2 Scale ............................................................................................................................... 49

6.3 Move ............................................................................................................................... 50

6.4 Copy ............................................................................................................................... 51

6.5 Fix Errors ........................................................................................................................ 51

6.6 Merge / Save Models ..................................................................................................... 52

6.7 Advanced Printing Options ............................................................................................ 53

6.8 Printer Information ........................................................................................................ 56

6.9 Software Version and Upgrades .................................................................................... 57

6.10 Image Conversion ........................................................................................................ 57

7 Printing Tips and Maintenance ................................................................................................. 59

7.1 Printing Tips ................................................................................................................... 59

7.2 Printer Nozzle Maintenance .......................................................................................... 60

7.3 Replace Extruder ........................................................................................................... 61

1.Safety and Printing Environment

1.1 Safety Precautions

1. The UP mini 3 3D printer requires the power adapter provided by the original

manufacturer, otherwise the machine could be damaged or even cause fire. Keep the power

adapter away from water and out of high temperature environments.

2. During printing, the temperature of the nozzle of the printer could reach 300°C and the

temperature of the print platform could be over 100°C. Do not touch these parts with your

bare hands when the printer is in the operation mode, not even with the heat resistant

gloves included in the accessories, as the temperature could damage the gloves and injure

your hands.

3. During printing, the print head and other mechanical parts move at high speed. Touching

these parts while they are moving could cause injuries.

4. Make sure to remove the build plate off the build chamber first before removing the

model off the build plate. If you remove the model from the build plate directly, the build

plate could be damaged.

5. Wear goggles when removing the supporting material from models or detaching models

from the build plates.

6. When printing with plastic filaments, the process could generate slight and, for some

people, annoying odor. It is recommended to run the printer in a well ventilated

environment. We also suggest keeping the printer in an environment with a stable

temperature as unwanted cooling could cause adverse effects to the print quality.

7. After changing the extruder, make sure to conduct a calibration before a printing.

8. Adult Supervision: Adult supervision is required in the presence of children. Small printed

parts are a choking hazard, and always keep sharp tools away from children.

1.2Printing Environment

1.As the slight odor could be generated during printing, keep the printer in a well ventilated

environment. The ideal working temperature of the UP mini 3 is between 15°C and 30°C

with a relative humidity between 20–70%. Printing at temperatures out of this range could

cause adverse effects to the printing process and print quality.

2. It is recommended that you avoid wearing cotton, wool and other materials that are

prone to static electricity before using the printer to prevent damage to the precision

components of the equipment when the equipment is in operation.

1.3 One Year Warranty

Tiertime and its authorized resellers warrant to the original purchaser that this product is

free from defects in material and workmanship. Tiertime or its resellers will for one year, at

its option, repair or replace at no charge for parts and labour from the date you purchase

the product from Tiertime or its authorized resellers. Print heads, print boards, nozzles and

other consumables are warranted for thirty (30) days.

• Tiertime reserves the right to determine the validity of all warranty claims.

• Warranty is voided if the product serial number has been altered or removed.

• Warranty is voided if the product has been misused or damaged or if evidence is present

that the product was altered, modified, or serviced by unauthorized service people.

For the detailed Warranty and Service Level Agreement, visit our website

https://www.tiertime.com.

1.4 Compliance

The UP mini 3 is compliant to the following quality certification:

FCC

RoHS

2. Product Introduction

2.1 UP mini 3

UP mini 3 is an entry-level 3D printer launched by Tiertime, which can meet daily work requirements such as

high-frequency design verification for schools and research institutes.

2.2 Main Structure

3 Printer Installation

3.1 Install Filament Spool Holder

Insert the filament spool holder into the slot at the back of the printer.

3.2 Install Air Filter

1. Rotate counterclockwise to remove the top cover of the air filter.

2. Put the air filter provided in the packaging box into the base of the air filter system.

Note: Change the air filter every 3 months, or every 300 hours of active printing.

Note: Print board has two surfaces. One side is perf board and the other side is glass board, both of which can be

a print plate. The perf board side is suitable to print with raft, and it can be used to print the materials that are

easy to warp, e.g. ABS. If printing with no raft, use the glass side of the board with glue or tapes on the surface.

3. Turning the upper cover of the air filter clockwise to close it.

3.3 Install Build Plate

Place the print board in the slots of the platform with the side of the perf board facing up, push the board

forward and make sure the board fits in the slot.

If printing with no raft, make sure the glass side of the print board facing upward, and then apply glue or tapes

on the surface of the print board.

Note: Before switching on the printer for the first time, do not connect the USB cable with a

computer, because connecting to a computer may lock the buttons on the touchscreen. After

switching on printer for the first time, use the touchscreen to initialize the printer, calibrate it and

load the filament, then connect the printer to the computer.

3.4 Cable Connection

1. Secure the power connector into the power interface at the back of the machine, and plug the other side of

the cable in the power outlet. Turn on the power switch at the back of the machine.

2. Plug in the USB cable (provided in the package) into the USB socket at the back of the machine.

3.5 Initialize Printer

Click the lower right “Initialize” button, and confirm the machine to start the initialization process, which may

take several minutes. The printer will get back to the zero position once the process is done.

Note: Before the calibration process, make sure the tip of the nozzle is clean without any residue, otherwise, it

will introduce extra delta in the nozzle height which could affect the print quality.

3.6 Calibrate Printer

All the UP mini 3 3D printers have gone through the calibration process in our factory. However, due to bumpy

shipping conditions, we strongly recommend you conduct platform leveling and nozzle height adjustment before

your first use of the machine.

Click the “Calibrate” button on the touchscreen, and make sure the nozzle is clear away from the print platform.

If the nozzle is very close to the platform, click the “-” button to reduce the nozzle height. Click the “Auto” button

to kick start the calibration process. The extruder will start moving and do 9-point matrix leveling and the nozzle

height adjustment process.

The whole calibration process can take several minutes. Once the process is finished, click the “Back” button to

return to the main menu.

3.7 Install Filament

In order to keep the consistency of the print quality, we recommend using Tiertime Fila filaments on Tiertime 3D

Printer. Our operational software, UP Studio has the optimized parameter settings built in, which will ensure the

best printing experience.

There is a 500-gram UP Fila PLA spool that comes with the printer. Install the filament spool in the following steps:

1, Take out the PLA spool from the vacuum bag.

2, Use the cutting pliers in the accessory to trim the end of the filament making sure it is flat.

Indice

Altri manuali TierTime Stampante 3D

TierTime

TierTime UP300 Manuale utente

TierTime

TierTime UP300D Manuale utente

TierTime

TierTime UP BOX Manuale utente

TierTime

TierTime UP BOX Manuale di installazione e funzionamento

TierTime

TierTime UP Plus 2 Manuale utente

TierTime

TierTime UP BOX Manuale utente

TierTime

TierTime UP mini 2 Guida alla configurazione

TierTime

TierTime UP BOX+ Manuale utente

TierTime

TierTime Filament Dryer PRO Manuale utente

TierTime

TierTime UP300 Manuale utente

TierTime

TierTime UP mini Manuale utente

TierTime

TierTime UP Mini 2 ES Manuale utente

TierTime

TierTime UP600 Manuale utente

TierTime

TierTime UP300D Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente