C-Box User's Manual English 3 / 44
tiko Energy Solutions AG IM-0007-0009 Rev. 2
•Disconnect this equipment from the distribution box before cleaning it. Do not
use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for
cleaning.
•The openings on the enclosure are for air convection and protect the equipment
from overheating. Do not cover the openings.
•Do not pour any liquid into opening. This could cause fire or electrical shock.
•Do not open the enclosure of this product and/or alter this product in any way.
•Have the equipment checked by a service professional if one of the following
situations arises:
oThe line is damaged.
oLiquid has entered the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work properly, or you cannot get it to work
according to user’s manual.
oThe equipment has been dropped or damaged.
oThe equipment has obvious signs of breakage.
•Keep this equipment away from excessive or condensing humidity.
•Do not leave this equipment in an unconditioned environment. temperatures
above 55°C will damage the equipment.
•Keep this guide for later reference.
Feedback
You can also submit your comments via regular mail by writing to the following address:
tiko Energy Solutions AG
Alte Tiefenaustrasse 6
CH-4600 Bern
We appreciate your comments.
Overview
Intended Use
The C-Box is a remote terminal unit (RTU). It offers a smart communication interface for
devices and appliances that support the Modbus protocol. In addition, it features general-
purpose inputs and outputs. It is part of a family of devices that require a Bridge-Box (REF
CMB-01.1011) to be powered and to operate. It cannot be used standalone.
The C-Box presents on both sides an SBUS connector (IMAGE 1) to be daisy-chained
with other devices of the same family.
