Transcend DrivePro Manuale utente
User’s Manual
Body Camera
DrivePro™ Body
Control Center
(Version 1.1)
1
Table of Contents
1. Introduction.................................................................................................................................2
1-1 Features............................................................................................................................... 2
1-2 System Requirements .......................................................................................................2
2. Getting Started...........................................................................................................................3
2-1 Hard Drive Installation (for Diskless DBN1 only)...........................................................3
2-2 Connection Diagram..........................................................................................................6
2-3 Downloading and Installing the Control Center client...................................................7
2-4 Setting/Changing RAID Modes........................................................................................ 8
3. Using the DrivePro™ Body Control Center Software ........................................................ 10
3-1 Status ................................................................................................................................. 11
3-2 File Management..............................................................................................................14
3-3 Server Management.........................................................................................................17
3-4 Camera Management......................................................................................................21
3-5 Log Display........................................................................................................................ 26
3-6 Preference......................................................................................................................... 27
5. End-User License Agreement (EULA)................................................................................. 28
6. GPL Disclosure........................................................................................................................ 30
7. Federal Communications Commission (FCC) Statement................................................. 31
2
1. Introduction
This User's Manual covers the features and functions of the DriveProTM Body Control
Center, a network-based body camera management and video storage system which
simplifies deployment of a complete body camera solution. Control Center is designed to
operate seamlessly with Transcend DrivePro Body cameras and DPD6N docking stations.
The DrivePro Body Control Center software supports centralized file management, account
management, and device management.
1-1 Features
Allows multiple users to connect via a local Gigabit network
Allows for searching files, sorting files into categories, adding descriptions,
exporting files to local storage, and burning files to optical media
Simple account management and permissions management
Supports simultaneous connection of up to 3 docking stations or 18 devices in
total
Allows up to 40 simultaneous users via Gigabit connection
Convenient one-click update of DrivePro Body Firmware
1-2 System Requirements
Windows 7 / Windows 8.1 / Windows Server 2008 R2 SP1 / Windows 10
.NET 4.0 is required.
3
2. Getting Started
2-1 Hard Drive Installation (for Diskless DBN1 only)
*Please only use NAS-grade HDDs
Notes:
To avoid damaging the DBN1 Control Center with static electricity, ground yourself by
touching something made of metal before handling any sensitive electronic parts.
When replacing hard drives, do not change the order of the hard drives in the Control
Center unit. For example, removing Drive 1 and replacing it with Drive 2 may cause
data to be corrupted or lost.
1-1 Remove the front panel by pulling it forward from both sides.
1-2 Pull out the two drive trays.
Note: Do not apply excessive pressure to the top of the unit.
4
2. Install NAS-grade hard drives (same capacity recommended) into the drive trays.
3-1. Affix the two front screws.
3-2. Insert the steel plate in the correct direction.
3-3. Affix the rear screw.
5
4-1. Reinsert the drive trays back into the empty drive slots.
4-2. Replace the front panel.
6
2-2 Connection Diagram
The DBN1 Control Center connection diagram is illustrated below. Connect an Ethernet
cable from the DBN1 Control Center’s LAN port to your network switch or router. Connect
your client PCs and DPD6N Network Docking Stations to the same local area network. As
shown in the diagram below, connect your network switch or router to the WAN port of the
DPD6N Network Docking Station.
The DBN1 Control Center allows up to twelve DrivePro Body cameras to upload
simultaneously, and up to forty users to access and manage files at the same time.
7
2-3 Downloading and Installing the Control Center Client
1. Download the Control Center Client from the provided download link. On any Client PC,
click and run “Installer.exe”, press “Install”, and wait for the installation progress to
complete.
1. When installation is completed, the software will open automatically.
2. Fill in your DBN1 Control Center’s IP address and click “Connect”, or just click on “Find
Control Center”to search for any connected DBN1 units.
8
2-4 Setting/Changing RAID modes
You may set or change RAID modes in the two situations below:
1. For diskless DBN1 Control Center setup:
After installing the hard drives (See 2-1 Hard Drive Installation (for Diskless DBN1 only)),
use the Control Center Client to connect to the DBN1 Control Center unit. You will be asked
to select one of the RAID types.
9
2. When users want to change RAID modes:
Click on the “RAID Settings”button on the Status page.
Note: If you change RAID modes, all data on the unit will be permanently deleted! Please
make sure you have backed up your data beforehand.
Altri manuali per DrivePro
1
Indice
