TrekStor DataStation picco SSD 3.0 Manuale utente

OPERATING INSTRUCTIONS

DataStation®

picco SSD 3.0

EN 2

Contents

1) About DataStation® picco SSD 3.0 …………………………………… 3

2) Safety information ……………………………………………………… 4

Operational safety ………………………………………………………… 4

Repair …………………………………………………………………… 5

Intended operating conditions …………………………………………… 5

Care and maintenance …………………………………………………… 6

Information on the memory capacities indicated………………………… 6

3) Technical specications ………………………………………………… 7

4) Package contents ……………………………………………………… 7

5) Controls and ports ……………………………………………………… 9

6) Connecting the DataStation to a computer …………………………… 9

7) Data exchange ………………………………………………………… 9

Windows® 8.1 / 8 / 7 / Vista® / XP ………………………………………… 9

Mac® OS X® 10.6 or above ………………………………………………… 10

8) Logging o and disconnecting the DataStation from the computer 10

Windows 8.1 / 8 / 7 / Vista / XP …………………………………………… 10

Mac OS X 10.6 or above…………………………………………………… 10

9) Copyright and Trademark Notices …………………………………… 11

10) Notes on disposal ……………………………………………………… 12

Disposal…………………………………………………………………… 12

Recycling ………………………………………………………………… 12

11) Notes on liability and warranty ………………………………………… 12

We hope you have a lot of fun with your TrekStor DataStation picco SSD 3.0. Please

read the following instructions carefully to learn about the features and functions

of this product.

IMPORTANT!

Follow the safety information in Section 2.

IMPORTANT!

Please keep these instructions in a safe place for future reference. Should

the device change hands, pass these instructions on to the new owner.

Up-to-date product information is available on the TrekStor website:

www.trekstor.de

Visit www.trekstor-onlineshop.de for additional products and accessories.

1) About DataStation® picco SSD 3.0

The DataStation picco SSD 3.0 is an external hard drive with USB 3.0 interface for

storing and for optimum availability of data. It is available as a version with and

as a version without write protection (write-protect switch).

Only use the device for its intended purpose. The manufacturer is not liable for

damages resulting from improper use. Furthermore, the manufacturer shall not

be responsible for damages or loss of data and any subsequent damage caused.

EN 4

2) Safety information

These instructions use the following warning symbols and key words:

aDANGER

Indicates possible danger to life and/or danger of severe, irreversible injuries.

rCAUTION

Follow instructions to avoid injuries and material damage.

rWARNING

Follow instructions to avoid material damage.

iNOTE

Further information about the use of the device.

Operational safety

rCAUTION

Those who, as a result of their physical, sensory or mental capabilities,

or lack of experience or knowledge, are not in a position to use the product

safely must not be allowed in the vicinity of the product without supervision

or instruction by a person responsible for their safety. Supervise children

around the product.

aDANGER

Keep packaging materials out of reach of children (e.g., plastic sheets).

There is a danger of suffocation.

aDANGER

Some accessories can pose a choking hazard for babies and young children.

Keep these accessories out of reach of babies and young children.

aDANGER

Never open the casing of the device or the charger: This may cause an

electrical shock, short circuit or fire!

aDANGER

Do not insert any object into the ports or openings of the device: This may

short circuit or fire!

aDANGER

Do not cover the device during operation. This may cause the device to

overheat and potentially catch fire!

aDANGER

Your safety is very important to us! Safety always has first priority

in road transport. Protect yourself and other road users by operating

the device only if the traffic situation allows it and you do not endanger

or hinder anyone. Local legislation in force applies.

oAvoid using USB cables over 3 m in length.

Exposing the device to electrostatic discharge can interrupt the data

ptransfer between the device and the computer or impair the functions

of the device. Should this happen, disconnect the device from the USB

port and reconnect it.

Repair

rWARNING

No parts inside the device require maintenance or cleaning.

rWARNING

Should the device become wet, turn it off immediately. Ensure the device

is checked for operational safety before using it again.

Intended operating conditions

jProtect the device from extremely high or low temperatures and

fluctuations in temperature. Use it at an ambient temperature

between 10º C and 40º C.

mDo not place the device near a heat source and protect it from direct sunlight.

eNever expose the device to humidity, condensation or moisture.

hEnsure you use and store the device in a dust-free environment.

EN 6

Care and maintenance

gNever clean the surface of the device with solvents, paint thinners,

cleaning agents or other chemical products. Use a soft, dry cloth

or a soft paintbrush.

Information on the memory capacities indicated

qThe capacity indicated by your operating system can be different than the

actual capacity of your device. Like most manufacturers of computer

hardware, TrekStor uses the prefixes for units (e.g. 1 GB = 1.000.000.000

bytes) as prescribed by the International System of Units (SI).

Unfortunately, many operating systems do not comply with this norm and

display a lower capacity because they base their calculations on

the assumption that 1 GB = 2 bytes = 1.073.741.824 bytes.

3) Technical specifications

Dimensions (W x H x D) 50 x 10 x 84 mm

Data transfer rate write up to 280 MB/s

Data transfer rate read up to 430 MB/s

Weight ca. 33 g

Housing material Plastic

Interface 1x SuperSpeed USB 3.0

(Micro-USB 3.0 socket)

Supported operating systems Windows® 10 / 8.1 / 8 / 7 / Vista®/ XP,

Mac® OS X® 10.6 or above,

Linux® Kernel 2.6.x or above.

System requirements Free USB connection (SuperSpeed USB 3.0,

Hi-Speed USB 2.0, USB 1.1)

iPlease note that the drivers for the USB 3.0 port are not automatically installed

with all operating systems. If you have any questions about the installation of

these drivers, please contact the manufacturer of your computer or of the

used USB 3.0 interface card.

4) Package contents

• TrekStor DataStation picco SSD 3.0

• USB cable (Micro-USB/USB-A)

• Wallet (for devices without write protection)

• Operating instructions (for devices with write protection in digital form on

the hard drive)

EN 8

5) Controls and ports

A) Status LED

B) Micro-USB socket

C) Write-protect switch (for versions with write protection only)

6) Connecting the DataStation to a computer

iFor devices with write-protect switch

Please push write-protect switch (C) to the desired position before connecting to

a computer. The closed padlock icon stands for enabled write protection and the

open padlock icon for disabled write protection.

a) Connect the USB 3.0 port of your DataStation with a USB 3.0 port of your

computer. Please use only the provided USB 3.0 cable.

iThanks to the downward compatibility of USB 3.0 you can also connect your

DataStation to a USB 2.0 or USB 1.1 port of your computer. In this case, you will

not be able to benefit from the higher data transfer rate that you can get when

you connect the DataStation via USB 3.0. When connecting via an older USB

standard, please also use the provided USB 3.0 cable.

b) Your operating system automatically recognizes the DataStation

and adds the DataStation as a "LocaL Disk" (or "LocaL Drive") to

"MycoMputer"/"coMputer" (Microsoft Windows) or "Desktop"

(Mac OS X and Linux).

7) Data exchange

iFor devices with write-protect switch

When write protection is activated, you can open, view, and edit the files on the

DataStation, and copy them from the DataStation to the connected computer.

You cannot move, overwrite or delete the files, however.

Windows® 8.1 / 8 / 7 / Vista® / XP

a) Select the desired files or folders with your mouse.

b) Position the mouse pointer over the selected files or folders, and press the

right mouse button. Select "copy" from the context menu that appears.

c) Under "MycoMputer"/"coMputer", select the desired target.

d) Click it with your right mouse button, and select "paste" to start copying.

After copying is completed, the data will be available on the target drive.

iYou can also copy files with "Drag & Drop".

EN 10

Mac® OS X® 10.6 or above

Select the desired files with your mouse. Drag and drop the files in the "FinDer" to

the drive symbol of your DataStation.

iYour DataStation has been preformatted with the high-performance file system

NTFS. This file system is optimized for use with Microsoft Windows operating

systems from Windows XP and also works great with modern Linux operating

systems. If you use Mac OS X, it is necessary that you use a different file system.

You can easily reformat your DataStation with a different file system using the

"Disc Utility" of Mac OS X. You have the choice between the file system "HFS+"

("Mac OS Extended"), which is optimized for use with Mac OS X, and the file

system "FAT32", which permits the exchange of data with Windows operating

systems.

8) Logging off and disconnecting the DataStation from

the computer

Windows 8.1 / 8 / 7 / Vista / XP

At the bottom right on the task bar, left-click on the icon "saFeLy reMove HarDware".

In the context menu that appears, left-click on "saFeLy reMove Mass storage Device

- Drive" to select it. This removes the DataStation from the operating system of your

computer. You can now disconnect the DataStation from your computer.

Mac OS X 10.6 or above

You need to remove the drive from the Desktop before you disconnect it or turn

it off. Click on the relevant drive icon, and drag it to the trash icon.

iPlease follow the recommended logoff procedure to prevent damage to the

device or data loss.

Indice

Altri manuali TrekStor Magazzinaggio

TrekStor

TrekStor DataStation pocket pace 3.0 Manuale utente

TrekStor

TrekStor DataStation Maxi Xpress Manuale utente

TrekStor

TrekStor USB-Stick SE Manuale utente

TrekStor

TrekStor DataStation maxi g.u Manuale utente

TrekStor

TrekStor DataStation maxi Manuale utente

TrekStor

TrekStor DataStation MAXI M.U Manuale utente

TrekStor

TrekStor SATA Manuale utente

TrekStor

TrekStor DataStation pocket Xpress Manuale utente

TrekStor

TrekStor DataStation Microdisk Manuale utente

TrekStor

TrekStor SATA-Storage 3.5 Manuale utente

TrekStor

TrekStor DataStation pocket q.ue Manuale utente

TrekStor

TrekStor DataStation pocket Xpress Manuale utente

TrekStor

TrekStor t-series Manuale utente

TrekStor

TrekStor MovieStation pocket c.uc Manuale utente

TrekStor

TrekStor DataStation Maxi Classic Manuale utente

TrekStor

TrekStor 71816 Manuale utente

TrekStor

TrekStor MovieStation Manuale utente

TrekStor

TrekStor DataStation Pocket Capa Manuale utente

TrekStor

TrekStor datastation maxi z.ul Manuale utente

TrekStor

TrekStor DataStation Pocket Capa 3.0 Manuale utente

TrekStor

TrekStor USB-Storage 2.0 Manuale utente

TrekStor

TrekStor DataStation PocketAir Manuale utente

TrekStor

TrekStor I.GEAR-SSD-STICK PRIME Manuale utente

TrekStor

TrekStor DataStation maxi z. ul Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente