TRENDnet TE100-S32plus Manuale utente
Quick Installation Guide
TE100-S32plus
Table of Contents
Table of Contents
Version 12.20.2006
English ......................................................................................................
Technical Specifications .............................................................................
Troubleshooting ..........................................................................................
1
1
2
4
6
1. Before You Start
2. Hardware Installation .........................................................................
.................................................................................
Installation Requirements
Application
Package Contents
1. Before You Start
English
1
Quick Installation Guide
TE100-S32plus
Power Cord
Rack Mount Kit
Computer with Network adapter installed
An environment that is fairly cool and dry
Leave at least 10 cm of space at the front and rear of the Switch for
ventilation
EIA Standard 19-inch rack or sturdy level surface that can support the
weight of the Switch
An environment that is free from strong electromagnetic field generators
(such as motors), vibration, dust and direct exposure to sunlight
10/100Mbps
32-Port 10/100Mbps Fast Ethernet Switch
(TE100-S32plus)
10/100Mbps Multi-Port
Print Server
(TE100-P21)
Printers
Cable/DSL
Modem Router
Internet
Workstations with PCI Adapter
(TE100-PCIWN)
Laptop with PC Card
(TE100-PCBUSR)
Server with PCI Adapter
(TE100-PCIWA)
2. Hardware Installation
English
2
1. Connect the Power Cord to
the TE100-S32plus and then to a
power outlet.
2. Connect a CAT-5 RJ-45 network
cable from the computer to an
available Ethernet port on the
TE100-S32plus.
4. Carefully position the switch onto
the rack. Align the bracket to the
screw holes on the rack, then use
the screws provided with the
equipment rack to mount the
switch.
English
3
The Switch can be mounted in an EIA standard-size, 19-inch rack, which can
be placed in a wiring closet with other equipment.
Rack Mount
Installing the TE100-SFXM Fiber Module (Optional)
3. Attach the mounting brackets to
both sides of the switch and secure
them with the provided screws.
5. Unscrew the cover from the back of
the switch.
6. Slide the TE100-SFXM into the fiber
slot.
7. Secure the TE100-SFXM with the
screws.
4
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-Duplex Flow Control
Protocol CSMA/CD
Data Transfer Rates
Ethernet:
10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
Fast Ethernet:
100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Network Cables Ethernet: UTP/STP CAT-3, 4, 5
Fast Ethernet: UTP/STP CAT-5
Number of Ports
32 x 10/100Mbps Auto-negotiation, Auto-MDIX
1 x 100Base-FX Fiber Module Slot for Optional
Fiber Adapter (TE100-SFXM)
General
Topology Star
Technical Specifications
Transmission Method
MAC Address Learning
Store-and-forward
Self-learning, Auto-aging
RAM Buffer 1Mbyte per device
Packet Filtering/
Forwarding Rate
Filtering Address Table
Ethernet: 14,880pps (packet per second)
Fast Ethernet: 148,800pps (packet per second)
4K entries per device
Performance
5
Power 100-240VAC. 50/60Hz. Internal Power Supply
Power Consumption 40 Watts max.
Temperature Operating: 0 ~ 40 C, Storage: -10 ~ 70 C° ° ° °
Dimensions (L x W x H) 440 x 200 x 44 mm (17.3 x 7.9 x 1.73 in.)
Weight 2.66 kg (5.86 lbs)
Physical and Environmental
Humidity
Certification
10% ~ 90%
FCC, CE
6
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
After connecting the Switch to a power outlet, the LEDs do not turn on.
Check the connection of the external power adapter to the TE100-S32plus and
the power outlet. Also check that the power outlet is receiving power.
When I connect a computer to the Switch's port, the LINK/ACT LED turns on,
but the 100Mbps LED remains off.
When the 100Mbps LED remains off, the computer's connection speed is
10Mbps.
After I connect my PCs to the Switch, I am unable to share files.
First, check the LEDs on the Switch. Make sure the LINK/ACT LED is on.
Second, check the network cable. The minimum length of the cable is 1.5 meters
and the maximum length of the cable is 100 meters. Third, disable any software
firewall program. Fourth, verify that you have file sharing enabled. Please contact
your operating system provider for more information.
After I connect my PCs to the Switch, I can only get onto the Internet from one
computer.
The Switch was not designed to share Internet between multiple computers.
You need to install an Internet router such as the TRENDnet TW100-S4W1CA.
I purchased the optional fiber module, TE100-SFXM. After I installed it on the
switch, I can not make a connection. What should I do?
First, make sure the opposing fiber connection (e.g. fiber switch, fiber converter,
fiber adapter) is a 100Mbps multi-mode fiber device with SC-type connector.
Second, make sure that you are using 50/125um or 62.5/125um multi-mode fiber
cables. Third, verify that the TX and RX cables have been reversed on the
opposing Fiber connection. Fourth, power down the switch and the opposing fiber
connection. Wait 15 seconds, and then power everything back up. Fifth, make sure
the distance between the two fiber connections does not exceed 2 kilometers.
If you still encounter problems or have any questions regarding the TE100-S32plus,
please contact TRENDnet's Technical Support Department.
Limited Warranty
- 5-Year Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TE100-S32plus
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.
7
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year
Warranty
8
Altri manuali per TE100-S32plus
1
Indice
Altri manuali TRENDnet Interruttore
TRENDnet
TRENDnet TK-801R Manuale utente
TRENDnet
TRENDnet TEG-S081Fi Manuale
TRENDnet
TRENDnet TEG-S2620i Manuale utente
TRENDnet
TRENDnet TEG-S224 - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TEG-448WS - Switch Manuale utente
TRENDnet
TRENDnet TE-SK1 Manuale utente
TRENDnet
TRENDnet TPE-T160H Manuale utente
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Manuale utente
TRENDnet
TRENDnet TEG-S80TXD Manuale utente
TRENDnet
TRENDnet TI-G102 Manuale utente
TRENDnet
TRENDnet TPE-T80H Manuale utente
TRENDnet
TRENDnet TE100-S50g Manuale utente
TRENDnet
TRENDnet TE100-S24D Manuale utente
TRENDnet
TRENDnet TK-217i Manuale utente
TRENDnet
TRENDnet TE100-S16D Manuale utente
TRENDnet
TRENDnet TE-500plus Manuale utente
TRENDnet
TRENDnet TI-IG60 Manuale utente
TRENDnet
TRENDnet TPE-S88 - Web Smart PoE Switch Manuale utente
TRENDnet
TRENDnet TL2-G244 Manuale utente
TRENDnet
TRENDnet TEG-S81g Manuale utente
