TRENDnet TEG-S18TXE Manuale utente
8-Port 1000BASE-T
Gigabit Ethernet Switch
TEG-S18TXE
User’s Guide
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user’s guide, may
cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
VCCI Warning
This is a product of VCCI Class A Compliance.
TABLE OF CONTENTS
ABOUT THIS GUIDE..............................................................................1
TERMS ....................................................................................................1
OVERVIEW OF THIS USER’S GUIDE........................................................1
INTRODUCTION.....................................................................................3
GIGABIT ETHERNET TECHNOLOGY .......................................................3
SWITCHING TECHNOLOGY.....................................................................4
FEATURES ..............................................................................................5
UNPACKING AND SETUP.....................................................................7
UNPACKING ...........................................................................................7
SETUP.....................................................................................................7
IDENTIFYING EXTERNAL COMPONENTS .......................................9
FRONT PANEL ........................................................................................9
REAR PANEL ........................................................................................10
LED INDICATORS.................................................................................10
TECHNICAL SPECIFICATIONS .........................................................13
1
ABOUT THIS GUIDE
This user’s guide tells you how to install your 8-Port
1000BASE-T Gigabit Ethernet Switch, how to connect it to
your Gigabit Ethernet network.
Terms
For simplicity, this documentation uses the terms “Switch”
(first letter upper case) to refer to the 8-Port 1000BASE-T
Gigabit Ethernet Switch, and “switch” (first letter lower case) to
refer to all Ethernet switches, including the 8-Port 1000BASE-T
Gigabit Ethernet Switch.
Overview of this User’s Guide
Introduction. Describes the
Switch and its features.
Unpacking and Setup. Helps
you get started with the basic
installation of the Switch.
Identifying External
Components. Describes the
front panel, rear panel and
LED indicators of the Switch.
Technical Specifications. Lists
all the technical specifications
of the Switch.
3
INTRODUCTION
This section describes the features of the 8-Port 1000BASE-T
Gigabit Ethernet Switch, as well as providing some background
information about Gigabit Ethernet and switching technology.
Gigabit Ethernet Technology
Gigabit Ethernet is an extension of IEEE 802.3 Ethernet
utilizing the same packet structure, format, and support for
CSMA/CD protocol, full duplex, flow control, and management
objects, but with a tenfold increase in theoretical throughput
over 100-Mbps Fast Ethernet and a hundredfold increase over
10-Mbps Ethernet. Since it is compatible with all 10-Mbps and
100-Mbps Ethernet environments, Gigabit Ethernet provides a
straightforward upgrade without wasting a company’s existing
investment in hardware, software, and trained personnel.
The increased speed and extra bandwidth offered by Gigabit
Ethernet is essential to coping with the network bottlenecks that
frequently develop as computers and their busses get faster and
more users use applications that generate more traffic.
Upgrading key components, such as your backbone and servers
to Gigabit Ethernet can greatly improve network response times
as well as significantly speed up the traffic between your
subnets.
4
Gigabit Ethernet supports video conferencing, complex imaging,
and similar data-intensive applications. Likewise, since data
transfers occur 10 times faster than Fast Ethernet, servers
outfitted with Gigabit Ethernet NIC’s are able to perform 10
times the number of operations in the same amount of time.
Switching Technology
Another key development pushing the limits of Ethernet
technology is in the field of switching technology. A switch
bridges Ethernet packets at the MAC address level of the
Ethernet protocol transmitting among connected Ethernet or fast
Ethernet LAN segments.
Switching is a cost-effective way of increasing the total
network capacity available to users on a local area network. A
switch increases capacity and decreases network loading by
making it possible for a local area network to be divided into
different segments which don’t compete with each other for
network transmission capacity, giving a decreased load on each.
The switch acts as a high-speed selective bridge between the
individual segments. Traffic that needs to go from one segment
to another is automatically forwarded by the switch, without
interfering with any other segments. This allows the total
network capacity to be multiplied, while still maintaining the
same network cabling and adapter cards.
Switching LAN technology is a marked improvement over the
previous generation of network bridges, which were
5
characterized by higher latencies. Routers have also been used
to segment local area networks, but the cost of a router and the
setup and maintenance required make routers relatively
impractical. Today’s switches are an ideal solution to most
kinds of local area network congestion problems.
Features
The 8-Port 1000BASE-T Gigabit Ethernet Switch was designed
for easy installation and high performance in an environment
where traffic on the network and the number of users increase
continuously.
8 1000BASE-T Gigabit Ethernet ports
Supports Auto-Negotiation for speed and duplex mode
Supports Auto-MDIX for each port
Support Full/Half duplex transfer mode for 10 and
100Mbps
Support Full duplex transfer mode for 1000Mbps
Full wire speed reception and transmission
Store-and-Forward switching method
Supports 4K absolute MAC addresses
Supports 128K Bytes RAM for data buffering
Extensive front-panel diagnostic LEDs
IEEE 802.3x flow control for full-duplex
Back pressure flow control for half-duplex
Altri manuali per TEG-S18TXE
2
Indice
Altri manuali TRENDnet Interruttore
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Manuale utente
TRENDnet
TRENDnet TK-401R Manuale utente
TRENDnet
TRENDnet TEG-S40SX Manuale utente
TRENDnet
TRENDnet TEG-2 248WS Manuale utente
TRENDnet
TRENDnet TE100-S1616 Manuale utente
TRENDnet
TRENDnet TEG-S80TXE - Copper Gigabit Switch Manuale utente
TRENDnet
TRENDnet TEG-448WS - Switch Manuale utente
TRENDnet
TRENDnet TK-403KR Manuale utente
TRENDnet
TRENDnet TEG-2248WS - Gigabit Web Smart Switch Manuale utente
TRENDnet
TRENDnet TK-209K Manuale utente
TRENDnet
TRENDnet TEG-S24R - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TK-217i Manuale utente
TRENDnet
TRENDnet TL2-E284 Manuale utente
TRENDnet
TRENDnet TK-401R Manuale utente
TRENDnet
TRENDnet TEG-S240TX - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TK-400 Manuale utente
TRENDnet
TRENDnet TU-700 Manuale utente
TRENDnet
TRENDnet TPE-TG44ES Manuale utente
TRENDnet
TRENDnet TFU-430 Manuale elenco delle parti
TRENDnet
TRENDnet TE100-S24D Manuale utente
