Triplett LT65 Manuale utente

User Manual

LT65

Digital Light Meter

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Introduction

Congratulations on your purchase of the Triplett LT65 Digital Light Meter.

The LT65 Digital Light meter is designed for Light intensity measurement

projects, quality control, health control and measuring Light intensity of

various kind of environments, like factories, parking lots, schools, offices,

transportation lines, schools and many other environments.

Safety

Do not operate the meter in environments where the following are

present: explosive gases (or materials), combustible gases (or

materials), steam, or dust.

Please replace the battery immediately when the low battery symbol

appears on the LCD.

Do not touch the meter’s circuit board for any reason; static

electricity or contamination could damage the sensitive

components.

This instrument was designed for pollution

degree 2. Operation Altitude: Up to 2000m

(7000’).

Description

1.LCD Display

2.Function Buttons

3.Light Sensor

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Display Overview

：Maximum display symbol.

：Minimum display symbol.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

：Low battery symbol, which shows the power is low

battery. Please change a new battery.

：Data hold symbol

TIME ：Time display, format: hour : minute

Function Buttons



：Long press the button "TIME" for 2

seconds to enter the time setting page. Short press the

button "TIME" to select the value of "hour" and "minutes" to

be set. Press the button "HOLD" to change the value. Long

press the button to exit the time setting.



：Maximum, Minimum function option, pressing

this button for 3 seconds exits this function., REC、Lux/Fc、LEVEL’

also will also exit this function.

：Displsy HOLD , LCD will show HOLD symbol.

TIME HOLD

MAX

MIN LEVEL Lux

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

：Range selection function. Range selection

function will disable under the “REC”function. Choose measurement

range before enter “REC”function.

：Backlight Function

：Changes UNITS Fc/Lux

1FC=10.76Lux,1KLux=1000Lux,1KFC=1000FC

：Power ON / OFF Button

To Power ON –Press and Hold this button for more than 1 second

until LCD screen full of display.

To Power OFF –Press and Hold this button for more than 3 seconds

until LCD screen have no any display.

Operation

1. POWER ON: Press the POWER button for more than 1 second until LCD

displays..

2. POWER OFF: Press the POWER button for more than 3 seconds until LCD

extinguishes.

3. Choose Lux or FC unit：Transfermeasurement range switch can exchange

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Lux or FC unit.

4. Transfer light probe cover and make it vertical to aligned light source.

5. Read the measurement data from LCD screen.

6. Over range: If the instrument only display“OL”, means the signal input is too

strong, should choose a higher range. Measurement range will display below

the LCD screen.

LUX :400 -> 4K -> 40k -> 400k; FC: 40 -> 400-> 4k -> 40k.

7. Data holding function: Press HOLD button and choose data holding function.

8. Maximum and minimum function: Press MAX/MIN button choose the

maximum reading and minimum reading function. Press MAX/ MIN or （

LEVEL、LUX/FC、REC）for 3 seconds exit this function.

9. USB function: connect with the computer’s USB interface.

10. Backlight function: Press Backlight button to start up the function, press it

again to exit the function.

11. When all measurement are done, please restore the light probe cover and

turn off the instrument.

Battery Replacement

When appears on the LCD, the 3*1.5V AA battery must be replaced.

1. Disconnect the sensor.

2. Remove the meter’s rubber protective jacket

3. Use a Phillips screwdriver to open the rear battery compartment

4. Replace the 3*1.5V AA battery

5. Close the battery compartment and replace the meter’s protective jacket

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Warranty Information

Triplett / Jewell Instruments extends the following warranty to the original purchaser of

these goods for use. Triplett warrants to the original purchaser for use that the products sold

by it will be free from defects in workmanship and material for a period of (1) one year from

the date of purchase. This warranty does not apply to any of our products which have been

repaired or altered by unauthorized persons in any way or purchased from unauthorized

distributors so as, in our sole judgment, to injure their stability or reliability, or which have

been subject to misuse, abuse, misapplication, negligence, accident or which have had the

serial numbers altered, defaced, or removed. Accessories, including batteries are not

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Specifications

Display

4 Digit LCD Display

Measurement

Range

0 to 400,000 Lux; 0 to 40,000 Fc

Notices

1 Fc = 10.76 Lux; 1kLux = 1000 Lux; 1k Fc

= 1000 Fc

Overload Display

LCD displays "OL"

Spectral

Response

CIE Appropriate Light (CIE eye response

curve)

Spectral

Precision

CIE VVfunction f1'% less than or equal to

Cosine Response

f2' less than or equal to 2%

Precision

±3% reading ±0.5%FS (<10,000 Lux)

±4% reading ±10d (>10,000 Lux)

Light probe

Silicon light diode and a spectral

response filter

Power

(3) 1.5V batteries

Light Probe

Length

59” (150cm)

Light Probe

Volume

4.5” x 2.4” x 0.8”( 115 x 60 x 20mm)

Dimensions

6.4” x 2.4 x 1.2”(162 x 62 x 30mm)

Weight

9.2 oz (260g)

Accessories

Canvas bag, User Manual, Batteries,

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Triplett Strumento di misura

Triplett

Triplett MS245 Manuale utente

Triplett

Triplett BR260 Manuale utente

Triplett

Triplett CFM400 Manuale utente

Triplett

Triplett GSM120 Manuale utente

Triplett

Triplett WQ120 Manuale utente

Triplett

Triplett ET400 Manuale utente

Triplett

Triplett GSM250 Manuale utente

Triplett

Triplett 360PL Manuale utente

Triplett

Triplett 630-NS Manuale utente

Triplett

Triplett 9325 Manuale utente

Triplett

Triplett AM320 Manuale utente

Triplett

Triplett CamView IP Pro Manuale utente

Triplett

Triplett CM400 Manuale utente

Triplett

Triplett EM300 Manuale utente

Triplett

Triplett 9200B Manuale utente

Triplett

Triplett CM1000 Manuale utente

Triplett

Triplett CM1070 Manuale utente

Triplett

Triplett LVPRO10 Manuale utente

Triplett

Triplett RHT60 Manuale utente

Triplett

Triplett GSM130 Manuale utente

Triplett

Triplett MS475 Manuale utente

Triplett

Triplett CFM100 Manuale utente

Triplett

Triplett CM600 Manuale utente

Triplett

Triplett CM1050 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente