TYAN S2932-E Manuale utente

Thunder n3600M /// S2932-E

Version 1.0

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Thunder n3600M are trademarks of TYAN Computer Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft, Windows are trademarks of Microsoft Corporation.

Marvell®is a trademark of Broadcom Corporation and/or its subsidiaries

nVIDIA, nForce are trademarks of NVIDIA Corporation.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

Table of Contents

Check the box contents! Page 3

Chapter 1: Introduction

1.1 Congratulations Page 5

1.2 Hardware Specifications Page 5

Chapter 2: Board Installation

2.1 Board Image Page 8

2.2 Block Diagram Page 9

2.3 Board Parts, Jumpers and Connectors Page 10

2.4 Installing the Processor Page 22

2.5 Tips on Installing Motherboard in Chassis Page 27

2.6 Installing the Memory Page 28

2.7 Attaching Drive Cables Page 30

2.8 Installing Add-in Cards Page 32

2.9 Connecting External Devices Page 33

2.10 Installing the Power Supply Page 34

2.11 Finishing up Page 35

Chapter 3: BIOS Setup

3.1 About the BIOS Page 37

3.2 BIOS Menu Bar Page 37

3.3 Setup Basics Page 38

3.4 Getting Help Page 38

3.5 In Case of Problems Page 38

3.6 BIOS Main Menu Page 39

3.7 Advanced Menu Page 40

3.8 PCI PnP Menu Page 62

3.9 Boot Menu Page 64

3.10 Security Menu Page 69

3.11 Chipset Menu Page 70

3.12 Exit Menu Page 80

Chapter 4: Diagnostics

4.1 Beep Codes Page 81

4.2 Flash Utility Page 81

4.3 AMIBIOS Post Code

Appendix: SMDC Information

Page 82

Page 85

Glossary Page 87

Technical Support Page 93

Check the box contents!

Item S2932WG2NR-E S2932G2NR-E

1x Thunder n3600M

S2932WG2NR-E motherboard

1x Thunder n3600M

S2932G2NR-E motherboard

1x 34-Pin floppy drive cable

6 x SATA cable 6 x SATA cable

3 x SATA Drive Power Adapter

3 x SATA Drive Power

Adapter

2 x SAS Cable --

1 x Ultra-DMA-100/66 IDE cable 1 x Ultra-DMA-100/66 IDE

cable

1 x USB2.0 cable 1 x USB2.0 cable

1 x Thunder n3600M user’s

manual

1 x Thunder n3600M user’s

manual

1 x Thunder n3600M Quick

Reference guide

1 x Thunder n3600M Quick

Reference guide

1 x TYAN driver CD 1 x TYAN driver CD

1 x I/O shield 1 x I/O shield

1 x SLI bridge 1 x SLI bridge

2 x CPU Retention Frame

and Back Plate

2 x CPU Retention Frame

and Back Plate

1 x COM Port cable 1 x COM Port cable

NOTE

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions. The Thunder

n3600M (S2932-E) is a flexible AMD64 platform for multiple applications, based

on NVIDIA nForce Pro3600 and SMSC DME5017 chipsets.

Designed to support AMD®uPGA 1207-pin ZIF L1 socket processors and 64GB

DDRII-667 memory, the S2932-E with integrated Dual Gigabit Ethernet LAN,

built-in 32MB DDR video memory and six serial ATA ports, is ideal for CPU,

memory, and video intensive applications such as CAD, Graphics Design, and

High Bandwidth Video Editing, etc.

Remember to visit TYAN’s Website at http://www.TYAN.com. There you can

find information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processor

•Two uPGA 1207-pin ZIF L1

sockets

•Supports up to two AMD

OpteronTM Rev. F 2000 Series

Santa Rosa Dual core

processors, and Barcelona Quad

core processors

•Integrated 128-bit DDR memory

controller

Expansion Slots

•Two (2) x16 PCI Express with x8

brandwidth

•Three (3) PCI-X slots

•One (1) 32-bit, 33MHz PCI v2.3

slots

•Total six (6) usable expansion

slots

Chipset

•nVIDIA nForce Pro 3600

•NEC nPD720400

•SMSC DME5017

•LSI 1068E

Integrated I/O Interfaces

•One (1) floppy connector

•One (1) IDE connector

•Six (6) SATA ports

•Eight (8) SAS ports

•Four (4) USB2.0 ports (2 at rear, 2

via cable)

•Two (2) COM ports (1 at rear, 1

via cable)

•Tyan 2x9 front-panel pin header

•Tyan 2x7 pin header (2.0mm) for

FAN tachometer and PWM

•2x25 IPMI pin header

Integrated 2D/3D PCI Graphics

•ATI ES1000 PCI graphics

controller

•32MB DDR Frame Buffer of video

memory

Integrated IDE

•One (1) ATA IDE slot for two IDE

devices

•Support for ATA-133/100/66/33

IDE drives and ATAPI compliant

devices

System Management

•SMSC DME5017 w/ hardware

monitoring

•Seven 4-pin fan header

•Temperature and voltage

monitoring

•Watchdog timer

•Port 80 code display LED

•TYAN IPMI support

Memory

•Dual memory channels

•Supports up to 16 DDRII-667

DIMMs

•Up to 64GB of register ECC/non-

ECC memory

Integrated Serial ATA II

•Serial ATA Host controllers

embedded

•Supports six serial ports running at

3.0Gb/s

•NV RAID 0, 1, 0+1, 5 and JBOD

support

•SATA activity LED connector

Serial Attached SCSI(SAS)

•LSI 1068E PCI-E SAS controller

•Supports 8 SAS ports running at

3.0Gb/s

•RAID 0, 1 and JBOD support

Back Panel I/O Ports

•Stacked PS/2 mouse & keyboard

ports

•Two (2) USB 2.0 ports

•One (1) COM1 connector

•One (1) 15-pin VGA port

•Two RJ45 (Marvell 88E1121 PHY

+ nVIDIA MAC) 10/100/1000

Base-T port with link/activity LED

Integrated LAN Controllers

•Two 10/100/1000 Base-T LAN

(nForce Pro3600 integrated MAC

with Marvell 88E1121Gigabit

Ethernet PHY)

•IEEE802.3 compliant, WOL/PXE

support

BIOS

•AMI BIOS 8Mbit Flash

•Supports ACPI 2.0

•PnP, DMI2.0, WfM2.0 power

management

Power

•ATX12V support, on-board 4-

phase VRD

•Universal 24-pin + 8-pin power

connectors

•4-pin auxiliary power connector

Form Factor

•Extended ATX (13” x 12”)

•8 layers PCB

Regulatory

•FCC Class B (Declaration of

Conformity)

•CE (Declaration of Conformity)

PCI-E Assignment

•X16 PCI Express with x8

bandwidth

•X16 PCI Express with x8

bandwidth

•NEC nPD720400 with x4

bandwidth

•LSI 1068E with x8 bandwidth

Chapter 2: Board Installation

You are now ready to install your motherboard. The mounting hole pattern of

the Thunder n3600M S2932-E matches the EATX specification. Before

continuing with installation, confirm that your chassis supports an ATX

motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

2.2 - Block Diagram

Thunder n3600M S2932-E Block Diagram

DDR2 SDRAM 5

DDR2 SDRAM 7

DDR2 SDRAM 4

DDR2 SDRAM 6

DDR2 SDRAM 3

DDR2 SDRAM 5

Dual Socket F(LGA1207)

DDR2 SDRAM 7

DDR2 SDRAM 4

DDR2 SDRAM 6

Channel B

DDR2 SDRAM

Interface

PCI-X slot

GBLAN

PCI-X slot

RJ45

88E1121

DDR2 SDRAM

Interface

Channel A

16 x 16

HyperTransport

IDE * 1

MCP55 Pro

RegisteredRegistered

AMD Socket F

Processor

CPU2

AMD Socket F

Processor

CPU1

PCI-E X8 (X16 Slot)

uPD720400

DDR2 SDRAM 0

DDR2 SDRAM 1

DDR2 SDRAM 2

DDR2SDRAM 3

USB * 4

SATA * 6

PCI-X 64/133

DDR2 SDR AM

Inter face

DDR2 SDR AM

Inter face

Channel A

Channel B

DDR2 SDRAM 2

DDR2 SDRAM 1

PCI-Express X8

DDR2 SDRAM 0

Secondary CPU Primary CPU

PCI-X slot

Channel A

Channel B

NEC

S1 S2 P1

16 x 16

HyperTransport

Marvell

BIOS

Super IO

SCH5017

FLOPPY

COM1

COM2

KB/MS

PCI-Express X4

SAS1068E

LSI

PCI 32/33

PCI slot

VGA

ATI ES1000

PCI Bus

SAS * 8

LPC

RGMII

L1 L1

2.3 - Board Parts, Jumpers and Connectors

Jumper Legend

 OPEN - Jumper OFF, without jumper cover

 CLOSED – Jumper ON, with jumper cover

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente