Ubiquiti UF-OLT-4 Manuale utente

UFiber OLT-4 SC/UPC GPON SFP

Transceiver (UF‑GP‑B+)

Mounting Brackets (Qty. 2)

Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4)

Power Cord Rubber Feet (Qty. 4)

Package Contents

System Requirements

Linux, Mac OS X, or Microsoft Windows 7/8/10

Web Browser: Google Chrome (Other browsers may have limited functionality)

Installation Requirements

Phillips screwdriver (for rack- or wall-mounting)

Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-

mounting)

UF-OLT-4 Quick Start Guide

System LED

PON LED (Ports 1 - 4)

SFP+ LED (Port 1)

Compatible PON SFP and SFP+ transceivers with appropriate ﬁber optic cabling

and accessories. For information about compatible ﬁber transceivers, visit:

ubnt.link/UFiber-OLT-Modules

Before You Begin

Designing your ﬁrst GPON deployment requires speciﬁc knowledge and planning.

For information on GPON network design and installation, including important

considerations and best practices, refer to:

ubnt.link/UFiber-GPON-Getting-Started

ubnt.link/Designing-a-GPON-Network

For details on conﬁguring UFiber devices for the ﬁrst time to allow ONU LAN ports to

provide connectivity, refer to: ubnt.link/UFiber-Initial-Conﬁguration

Hardware Overview

Blue/Flashing Initializing/Booting Up

White Ready for Use

Off No Link

White/Flashing GPON Link/Activity

Off No Link

UF-OLT-4 Quick Start Guide

MGMT LED

GPON (Ports (PON 1- 4)

SFP+ (Port 1)

MGMT Port

Console Port

USB Port

Reset Button

Green/Flashing 1G Link/Activity

White/Flashing 10G Link/Activity

Off No Link

Amber/Flashing 10/100 Link/Activity

Green/Flashing 1000 Link/Activity

Gigabit Passive Optical Network ports support up to 128 clients on each port.

Hot-swappable SFP+ port supports 1G or 10G connections.

10/100/1000 Ethernet port used for out‑of‑band management. For ﬁrmware

version 4.1 and newer, it is set to DHCP Client with the fallback IP address,

192.168.1.20/24.

Note: Previous ﬁrmware versions default to a static IP: 192.168.1.1.

RJ45 serial console port for Command Line Interface (CLI) management. Use an

RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the

Console port to your computer. (If your computer does not have a DB9 port, then

you will also need a DB9 adapter.) Then conﬁgure the following settings as

needed:

Baud rate 57600

Data bits 8

Parity NONE

Stop bits 1

Flow control NONE

Reserved for future use.

UF-OLT-4 Quick Start Guide

DC Power Jack

Power

There are two methods to reset the device to factory defaults:

Runtime reset (recommended) The device should be running after bootup is

complete. Press and hold the Reset button for about 10 seconds until the

MGMT LED starts ﬂashing and then becomes solidly lit. After a few seconds,

the LED will turn off, and the device will automatically reboot.

Note: To press the Reset button, insert a straightened paper clip (or

similar object) into the hole shown above. Do not use an object that

can break and become lodged in the hole.

Power-on reset Disconnect power from the device. Press and hold the Reset

button while connecting power to the device. Keep holding the button until the

MGMT LED starts ﬂashing and then stops ﬂashing after a few seconds.

The 24VDC input can connect a redundant or stand-alone DC power source (not

included) with minimum power: 56W, 25 to 16V, and 2.5 mm DC power inline

connector.

Note: You can use the redundant DC power source as a hot spare; if

the internal AC/DC power supply no longer provides power, then the

device will switch to the DC power source without interrupting its

operation.

Connect the included Power Cord to the Power port.

Hardware Installation

Mounting

UF-OLT-4 Quick Start Guide

2. 

UF-OLT-4 Quick Start Guide

Connecting a PON Module

WARNING: Never look directly into the ends of ﬁber or modules. The

emitted light could cause damage to the eye.

WARNING: Until ready for use, keep modules and ﬁber patch cables

covered using the included protective caps to ensure the connections stay

clean.

Note: One GPON SFP transceiver (model UF-GP-B+) is included. Use a

compatible PON SFP transceiver with the appropriate ﬁber optic cabling for

each PON port. For information on compatible ﬁber transceivers, visit:

ubnt.link/UFiber-OLT-Modules

UF-OLT-4 Quick Start Guide

Connecting SFP+

UF-OLT-4 Quick Start Guide

Accessing the Conﬁguration Interface

The following instructions apply to ﬁrmware version 4.1 and newer.

Note: Previous ﬁrmware versions default to a static IP: 192.168.1.1.

1. Connect an Ethernet cable from the MGMT port on the device to a LAN segment

that has an existing DHCP server.

UF-OLT-4 Quick Start Guide

Indice

Altri manuali Ubiquiti Hardware di rete

Ubiquiti

Ubiquiti UniFi UAP Manuale utente

Ubiquiti

Ubiquiti RocketDish RD-5G30 Manuale utente

Ubiquiti

Ubiquiti ER-4 Manuale utente

Ubiquiti

Ubiquiti USW-24 Manuale utente

Ubiquiti

Ubiquiti PBM3 Manuale utente

Ubiquiti

Ubiquiti airFiber 60 Manuale utente

Ubiquiti

Ubiquiti UF-LOCO Manuale utente

Ubiquiti

Ubiquiti UniFi Dream Machine Pro Manuale utente

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-23 Manuale utente

Ubiquiti

Ubiquiti UniFi Cloud Key Manuale utente

Ubiquiti

Ubiquiti NanoBeam M Manuale utente

Ubiquiti

Ubiquiti UF-Instant Manuale utente

Ubiquiti

Ubiquiti U6-MESH Manuale utente

Ubiquiti

Ubiquiti PowerBeam AC Gen2 Manuale utente

Ubiquiti

Ubiquiti UniFi Dream Machine Pro Manuale utente

Ubiquiti

Ubiquiti UF-Instant Manuale utente

Ubiquiti

Ubiquiti PowerBeam AC Gen 2 Manuale utente

Ubiquiti

Ubiquiti PowerBeam airMAX AC Gen2 PBE-5AC-Gen2 Manuale utente

Ubiquiti

Ubiquiti NanoBeam M5 Manuale

Ubiquiti

Ubiquiti UniFi US-48-500W Manuale utente

Ubiquiti

Ubiquiti PBE-5AC-GEN2-5-EU Manuale utente

Ubiquiti

Ubiquiti airMAX NanoBridge M NBM3 Manuale utente

Ubiquiti

Ubiquiti UniFi US-24-250W Manuale utente

Ubiquiti

Ubiquiti USW-48-POE Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente