Ubiquiti UDM Manuale utente

UDM AC Power Cord

Package Contents

System Requirement

Either of the following is required:

iOS or Android™ Mobile Device with UniFi Network App Installed

Web Browser: Google Chrome (Other browsers may have limited functionality)

IMPORTANT: We strongly recommend using UPS backup and power

regulation to prevent equipment damage due to stability issues with

local AC power.

Hardware Overview

UDM Quick Start Guide

System LED

LAN (Ports 1-4)

Internet Port

Power Port

Reset Button

White Device is ready to be configured

Flashing White

Device is booting up

Device is initializing/deinitializing

Heartbeat White Firmware update in process

Blue Device is configured and ready

Slow Flashing Blue Client connected to device via Bluetooth (BLE)

Flashing Off/White/Blue

Device is in recovery mode.

The LED will cycle through a pattern at one-

second intervals, between off, white, and blue.

RJ45 switch ports support 10/100/1000 Ethernet connections for the LAN

(Local Area Network). By default, they are set to DHCP Server with the

fallback IP address, 192.168.1.1/24.

The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP

Client by default.

Connect the included AC Power Cord.

Resets to factory defaults. The device should be running after bootup is

complete. Press and hold the Reset button for about 10 seconds until the

UDM Quick Start Guide

System LED becomes solidly lit light blue. After a few seconds, the LED will

turn off, and the device will automatically reboot.

Installation Requirements

Use Category 5 (or above) UTP cabling approved for indoor use.

Hardware Installation

UDM Quick Start Guide

Note: You can use Bluetooth on your smartphone to set up the device.

Configuration

You have the following options:

Enable Bluetooth on your mobile device and use the UniFi Network app.

Enable Wi-Fi on your mobile device and connect to UDM Setup <XXXX>

(XXXX is the last four characters of the device’s MAC address found on the

bottom device label). Go to “Chrome Instructions”.

Use a computer connected to the device on any LAN port, 1-4. Go to “Chrome

Instructions”.

UniFi Network App

UDM Quick Start Guide

3. Follow the on-screen instructions.

Chrome Instructions

Use the Chrome web browser to set up your device.

1. Ensure that your host system is on the same Layer 2 network as the UDM.

2. Launch the Chrome web browser and go to https://setup.ui.com

3. Follow the on-screen instructions of the Setup Wizard.

You can manage your network and view network statistics using the UniFi

Network Controller management interface. For information on using the UniFi

Network Controller software, refer to the User Guide located on our website at:

ui.com/download/unifi

Specifications

UDM

Dimensions ø110 x184.2 mm

(ø4.33 x 7.25")

UDM Quick Start Guide

UDM

Weight 1.05 kg

(2.32 lb)

Networking Interfaces (4) 10/100/1000 RJ45 Ports

Max. Power Consumption 26W

Power Method AC Power Cord

Power Supply Internal AC/DC Power Adapter,

(24V, 0.6A)

Supported Voltage Range 100 - 240VAC

LED System Status

Operating Frequency 2.4 GHz

5 GHz

Max. TX Power

2.4 GHz 23 dBm

5 GHz 30 dBm

Antenna (1) Dual-Band, Quad-Polarity Antenna

Antenna Gain

2.4 GHz 3 dBi

5 GHz 4.5 dBi

Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2

Wireless Security WEP, WPA-PSK,

WPA-Enterprise (WPA/WPA2, TKIP/AES)

Operating Temperature -10 to 45° C (14 to 113° F)

Operating Humidity 5 to 95% Noncondensing

Certifications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Hot surface. Do not touch.

WARNING: Do not use this product in location that can be submerged by water.

WARNING: Avoid using this product during an electrical storm. There may be a

remote risk of electric shock from lightning.

UDM Quick Start Guide

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis,

and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions.

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

The device has been approved by the FCC under FCC ID: SWX-UDM.

ISED Canada

CAN ICES-3(B)/NMB-3(B)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause

undesired operation of the device.

The device has been approved by ISED Canada under IC: 6545A-UDM.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-3(B)/NMB-3(B)

UDM Quick Start Guide

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

L’appareil ont été approuvés par ISDE Canada en vertu IC: 6545A-UDM.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour

une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux

systèmes de satellites mobiles utilisant les mêmes canaux.

IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with minimum distance 20 cm between

the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

AVIS IMPORTANT :

Déclaration sur l’exposition aux rayonnements :

Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements

dans un environnement non contrôlé.

Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il

y ait une distance minimale de 20 cm entre l’élément rayonnant et vous.

Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre

émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.

Australia and New Zealand

Brazil

Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e

não pode causar interferência em sistemas devidamente autorizados.

CE Marking

CE marking on this product represents the product is in compliance with all directives that

are applicable to it.

UDM Quick Start Guide

Country List

AT BE BG CY CZ DE DK EE EL ES FI FR HR HU

IE IT LV LT LU MT NL PL PT RO SE SI SK UK

BFWA (Broadband Fixed Wireless Access) members noted in blue

Note: This device meets Max. TX power limit per ETSI regulations.

The following apply to products that operate in the 5 GHz frequency range:

Note: This device is restricted to indoor use only when operating in the 5150 - 5350

MHz frequency range within all member states.

Note: All countries listed may operate at 30 dBm. BFWA member states may

operate at 36 dBm.

Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member

states. Other countries listed may use the 5.8 GHz frequency band.

WEEE Compliance Statement

Declaration of Conformity

Online Resources

UDM Quick Start Guide

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ubiquiti Router di rete

Ubiquiti

Ubiquiti EdgeRouter Lte 3 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter ER-8 Manuale utente

Ubiquiti

Ubiquiti UCK-G2-PLUS Manuale utente

Ubiquiti

Ubiquiti EdgeRouter 4 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter ERPro-8 Manuale utente

Ubiquiti

Ubiquiti AiAF-5 Manuale utente

Ubiquiti

Ubiquiti UFber loco Manuale utente

Ubiquiti

Ubiquiti AmpliFi AFi-G Manuale utente

Ubiquiti

Ubiquiti ER-12 Manuale utente

Ubiquiti

Ubiquiti ER-8-XG Manuale utente

Ubiquiti

Ubiquiti EdgeRouter ER-8 Manuale utente

Ubiquiti

Ubiquiti ERLite-3 Manuale utente

Ubiquiti

Ubiquiti EdgePoint R8 Manuale dell'operatore

Ubiquiti

Ubiquiti ROcket M5 Manuale utente

Ubiquiti

Ubiquiti LTU LR Manuale utente

Ubiquiti

Ubiquiti EdgeRouter 6P Manuale utente

Ubiquiti

Ubiquiti ERLite-3 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter X ER-X-SFP Manuale utente

Ubiquiti

Ubiquiti Edge Pro ERPro-8 Manuale utente

Ubiquiti

Ubiquiti Bullet Manuale utente

Ubiquiti

Ubiquiti UniFi AP PRO Manuale utente

Ubiquiti

Ubiquiti EdgeRouter 12 Manuale utente

Ubiquiti

Ubiquiti EdgeRouter 6P Manuale utente

Ubiquiti

Ubiquiti 3GStation Professional Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza