Ubiquiti EdgeSwitch Manuale utente

EdgeSwitch Rack-Mount Brackets (Qty. 2) Bracket Screws (M4, Qty. 8)

Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord

Package Contents

Installation Requirements

Phillips screwdriver (for rack- or wall-mounting)

Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting)

Use compatible ber SFP modules with the appropriate ber optic cabling. For information

about compatible ber SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through the AC ground of the power

supply.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit:

ui.com/toughcable

Note:

Although the cabling can be located outdoors, the EdgeSwitch itself should be

housed inside a protective enclosure.

Hardware Overview

ES-12F Quick Start Guide

Click for

Table of Contents

System LED

SFP Speed/Link/Act LED (Ports 1 - 12)

RJ45 Speed/Link/Act LED (Ports 13 - 16)

Note:

The System LED functionality has been updated with rmware v1.8.0. We

recommend that you update the EdgeSwitch to the latest rmware.

Flashing White Bootup in progress.

White Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™).

Blue Ready for use, connected to UNMS.

Steady Blue with Occasional

Flashing Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Oﬀ No Link

Amber Link Established at 100 Mbps

Flashing Indicates Activity

Green Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

Oﬀ No Link

ES-12F Quick Start Guide

Click for

Table of Contents

SFP (Ports 1 - 12)

RJ45 (Ports 13 - 16)

Reset Button

Console

DC Input

Amber Link Established at 10/100 Mbps

Flashing Indicates Activity

Green Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

Hot-swappable SFP ports support 1 Gbps connections. Ports 1-8 also support 100 Mbps.

RJ45 ports support 10/100/1000 Ethernet connections.

There are two methods to reset the EdgeSwitch to factory defaults:

Runtime Reset (Recommended)

The EdgeSwitch should be running after bootup is complete, and the System LED is white.

Press and hold the Reset button. The EdgeSwitch will reboot, and the System LED

becomes blue after three seconds. Continue to hold the Reset button for about 15

seconds until the System LED ashes blue for two seconds. This indicates that the

EdgeSwitch has reset to its factory defaults.

Power-on Reset

1. Disconnect the power from the EdgeSwitch.

2. While connecting the power to the EdgeSwitch, hold the Reset button for about 15

seconds until the System LED ashes blue for two seconds. This indicates that the

EdgeSwitch has reset to its factory defaults.

RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-

DB9, serial console cable, also known as a rollover cable, to connect the Console port to

your computer. Then congure the following settings as needed:

Baud rate 115200

Data bits 8

Parity NONE

Stop bits 1

Flow control NONE

The 25VDC input can connect a redundant or stand-alone DC power source (not included)

with minimum power: 56W, 25 to 16V, and 2.5 mm DC power inline connector.

Note:

You can use the redundant DC power source as a hot spare; if the internal

AC/DC power supply no longer provides power, then the EdgeSwitch will switch

to the DC power source without interrupting its operation.

ES-12F Quick Start Guide

Click for

Table of Contents

Power

Connect the included Power Cord to the Power port.

Hardware Installation

Mounting in a Rack (Optional)



ES-12F Quick Start Guide

Click for

Table of Contents

Connecting Power

ES-12F Quick Start Guide

Click for

Table of Contents

Connecting SFP

ES-12F Quick Start Guide

Click for

Table of Contents

ES-12F Quick Start Guide

Click for

Table of Contents

Connecting RJ45

Accessing the Conguration Interface

The EdgeSwitch is set to DHCP by default, so it will try to automatically obtain an IP address. If

that fails, then it will use the default fallback IP address, 192.168.1.2. Proceed to the

appropriate section, DHCP or

“Fallback IP Address”

DHCP

Use one of the following methods:

Set up the DHCP server to provide a specic IP address to the EdgeSwitch based on its

MAC address (on the label).

ES-12F Quick Start Guide

Click for

Table of Contents

Let the EdgeSwitch obtain an IP address and then check the DHCP server to see which IP

address was assigned.

To log in, follow these steps:

1. Launch your web browser. Type the appropriate IP address in the address eld. Press enter

(PC) or return (Mac).

2. Enter ubnt in the Username and Password elds. Click Sign In.

The EdgeSwitch Conguration Interface will appear. Customize additional settings as needed.

For more information, refer to the EdgeSwitch documentation, which is available at

ui.com/download/edgemax

Fallback IP Address

1. Ensure that your computer (or other host system) is connected to the EdgeSwitch.

2. Congure the Ethernet adapter on your host system with a static IP address on the

192.168.1.x subnet.

3. Launch your web browser. Type the appropriate IP address in the address eld (192.168.1.2

is the default fallback IP address). Press enter (PC) or return (Mac).

4. Enter ubnt in the Username and Password elds. Click Sign In.

ES-12F Quick Start Guide

Click for

Table of Contents

5. The EdgeSwitch Conguration Interface will appear. Click the System Settings tab.

6. Change the IP Address to a unique IP address. Click Apply.

ES-12F Quick Start Guide

Click for

Table of Contents

Questo manuale è adatto per i seguenti modelli

Altri manuali Ubiquiti Interruttore

Ubiquiti

Ubiquiti UniFi US-24-250W Manuale utente

Ubiquiti

Ubiquiti US-XG-6POE Manuale utente

Ubiquiti

Ubiquiti UniFi Manuale utente

Ubiquiti

Ubiquiti UBNT-US-8-150W-US Manuale utente

Ubiquiti

Ubiquiti UniFi USW-Pro-48-POE Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch 8 Manuale utente

Ubiquiti

Ubiquiti US-16-XG Manuale utente

Ubiquiti

Ubiquiti UniFi Switch 24 Manuale utente

Ubiquiti

Ubiquiti ES-24-250W Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch Lite ES-24-Lite Manuale utente

Ubiquiti

Ubiquiti 0817882025218 Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch 10 XP Manuale utente

Ubiquiti

Ubiquiti ES-24-250W Manuale utente

Ubiquiti

Ubiquiti USW--Pro--48 Manuale utente

Ubiquiti

Ubiquiti USW-24 Manuale utente

Ubiquiti

Ubiquiti UniFi USW-16-POE Manuale utente

Ubiquiti

Ubiquiti UniFi US-8 Manuale utente

Ubiquiti

Ubiquiti USW-48-POE Manuale utente

Ubiquiti

Ubiquiti UniFi USW-Industrial Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch 16XP Manuale utente

Ubiquiti

Ubiquiti US-XG-6POE Manuale utente

Ubiquiti

Ubiquiti US-XG-6POE Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch 48 LITE Manuale utente

Ubiquiti

Ubiquiti unifi switch 8 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente