Ubiquiti NanoStation M2 Manuale utente

2021-06-18 08:10 1/2 Anleitung – Unbrick Nanostation

Netz39 - https://www.netz39.de/wiki/

Anleitung – Unbrick Nanostation

Manual for Unbrick a UBNT Nanostation

compatible for:

Nanostation M2

Nanostation M2 XW

Nanostation loco M2

Nanostation loco M2 XW

Nanostation M5

Nanostation M5 XW

Nanostation loco M5

Nanostation loco M5 XW

(1) Download the AirOS 5.5.x ﬁrmware executable from the Ubiquiti website. Choose XM or XW

version depending on your device, If you don’t know, take a guess!

XM.v5.5.11.28002.150723.1344.bin, changelog

for: AG-HP-2G16, AG-HP-5G23, AG-HP-5G27, AirGrid M2, AirGrid M5, AR, AR-HP, BM2HP,

BM2-Ti, BM5HP, BM5-Ti, LiteStation M5, locoM2, locoM5, locoM9, M2, M3, M365, M5,

M900, NB-2G18, NB-5G25, NBM3, NBM365, NBM9, NS2, NSM3, NSM365, NSM5, PBM10,

PBM3, PBM5, Power AP N

XW.v5.5.10-u2.28005.150723.1358.bin, changelog

for: AG-HP-2G16, AG-HP-2G20, AG-HP-5G23, AG-HP-5G27, AirGrid M, AirGrid M2, AirGrid

M5, locoM2, locoM5, locoM9, M2, M3, M365, M5, M900, NBE-M2-13, NBE-M5-16, NBE-

M5-19, NSM2, NSM3, NSM365, NSM5, PBM3, PBM365, PBM5, RM2-Ti, RM5-Ti

(2) Start device into conﬁg/maintenance mode: in this precise order, unpower device,

conﬁgure PC into static IP 192.168.1.3 Netmask 255.255.255.0

press and maintain reset button

plug device in, release reset button as soon as LEDs blink (please wait 20-30 seconds)

(note 1: LED blink pattern is diﬀerent depending on device: Sometimes a single LED blinking 3/4

on, 1/4 oﬀ, sometimes two LEDs blinking "sideways")

(note 2: the static-IP connection to the device must be established before it boots into conﬁg

mode. It was tricky rebooting the device fast enough that the PC connection did not go down.

YMMV.)

(3) TFTP the AirOS 5.5.x ﬁrmware into the device:

tftp 192.168.1.20

(note: use this IP regardless of what ﬁrmware is already on the device)

Last update: 2018-01-25 22:30 freifunk:anleitungen:unbricknanostation https://www.netz39.de/wiki/freifunk:anleitungen:unbricknanostation

https://www.netz39.de/wiki/ Printed on 2021-06-18 08:10

tftp > bin

tftp > put complicatedfirmwarefilename.bin flash_upgrade

(note 1: this should only last 3 or 4 seconds, if not, you've done something wrong)

(note 2: it's possible that the device checks whether the ﬁrmware is version XW/XM at this point, and

refuse to load an incorrect ﬁrmware)

tftp > quit

(4) wait approx 10 minutes for the device to reboot (note: don’t try to be too smart, and be patient!)

(5) At this point the AirOS ﬁrmware is loaded, but the old settings are still in place. Here I was only

able to connect to the device via 192.168.1.1 with read-only credentials. To reset the settings (bu not

the ﬁrmware), when the device has already booted, press the reset button until LEDs blink, without

ever unplugging it.

(6) Now ﬁnally we have a factory-setting M5. It gives us an IP in DHCP, and the interface is at

192.168.1.20, login ubnt/ubnt

(7) And navigating in the admin interface, we can upload the Freifunk ﬁrmware for the M5, which we

download from https://md.freifunk.net/mitmachen/ﬁrmware/

(8) Upon reboot, the device (now on gluon ﬁrmware) starts in conﬁg mode and with the same static IP

set-up as before, we can access the set-up screen at http://192.168.1.1/ .

From now on, conﬁg mode is simply accessed by pressing reset button 5 seconds or so. There is no

need to reboot the device.

(9) Finally, do yourself/a future owner a favor: take a sharpie marker, and write down the type of

hardware (XW or XM) on the device itself!

further information: UniFi - TFTP soft recovery for bricked access point

→ zurück zu den Anleitungen

CC BY-SA 4.0 2016 Freifunk Magdeburg

From:

https://www.netz39.de/wiki/ - Netz39

Permanent link:

https://www.netz39.de/wiki/freifunk:anleitungen:unbricknanostation

Last update: 2018-01-25 22:30

Altri manuali per NanoStation M2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ubiquiti Punto di accesso wireless

Ubiquiti

Ubiquiti UniFi UAP-AC-PRO Manuale utente

Ubiquiti

Ubiquiti UniFi Dream Machine Beacon Manuale utente

Ubiquiti

Ubiquiti UniFi Enterprise AP Manuale utente

Ubiquiti

Ubiquiti RP5AC-PRISM Manuale utente

Ubiquiti

Ubiquiti UniFi AP XG Manuale utente

Ubiquiti

Ubiquiti UAP-IW Manuale utente

Ubiquiti

Ubiquiti UAP-AC-SHD Manuale utente

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro Manuale utente

Ubiquiti

Ubiquiti GigaBeam GBE Manuale utente

Ubiquiti

Ubiquiti U-LTE Manuale utente

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Manuale utente

Ubiquiti

Ubiquiti UniFi UAP-FlexHD Manuale utente

Ubiquiti

Ubiquiti Rocket R5ACL Manuale utente

Ubiquiti

Ubiquiti UniFi UAP Manuale utente

Ubiquiti

Ubiquiti LiteBeam M5 LBE-M5-23 Manuale utente

Ubiquiti

Ubiquiti UniFi UAP--AC--HD Manuale utente

Ubiquiti

Ubiquiti LAP-GPS Manuale utente

Ubiquiti

Ubiquiti PBE-M5-300-US Manuale utente

Ubiquiti

Ubiquiti UniFi Switch Flex Manuale utente

Ubiquiti

Ubiquiti NanoBeam ac Manuale utente

Ubiquiti

Ubiquiti UniFi AC SHD Manuale utente

Ubiquiti

Ubiquiti NanoBeam ac NBE-5AC-16 Manuale utente

Ubiquiti

Ubiquiti RocketM Manuale utente

Ubiquiti

Ubiquiti UniFi Wifi BaseStationXG Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

Draytek

Draytek VIGORAP 902 Manuale utente

EnGenius

EnGenius EAP350 Manuale utente