Ultimaker 2 Go Manuale utente

Ultimaker2Go

THE MIGHTY MINI 3D PRINTER

USER MANUAL

V2.1

Please read and understand the contents of this installation and user manual.

Failure to read the manual may lead to personal injury, inferior results or damage to the

Ultimaker 2 Go. Always make sure that anyone who uses the 3D printer knows and understands the contents

of the manual to make the most out of the Ultimaker 2 Go.

The conditions or methods used for assembling, handling, storage, use or disposal of the device are beyond our control

and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim

liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly, handling,

storage, use or disposal of the product.

The information in this document was obtained from sources which we believe are reliable. However, the information is

provided without any warranty, express or implied, regarding its correctness.

Intended use

Ultimaker 3D printers are designed and built for fused deposition modeling for various high quality plastics like PLA,

ABS, CPE within a commercial/business environment. The mixture of precision and speed makes the Ultimaker 3D

printers the perfect machines for concept models, functional prototypes and also the production of small series.

Although we achieved a very high standard in the reproduction of 3D models with the usage of Cura, the user remains

responsible to qualify and validate the application of the printed object for its intended use. While being an open

ﬁlament platform the best results will be achieved with Ultimaker certiﬁed ﬁlament, while eort has been made in order

to match material properties with machine settings.

This language version of the manual is veriﬁed by the manufacturer (Original manual).

No part of this publication, including pictures may be reproduced and/or made public, whether by printing, photocopying, microﬁlm or by any other

means whatsoever, without the prior written permission of Ultimaker.

DISCLAIMER

1. ULTIMAKER 2 GO 4

Ultimaker 2 Go at a glance 5

Speciﬁcations 7

2. GETTING STARTED 8

Unboxing 9

Installation 11

First use 13

3. THE BASICS 16

Changing ﬁlament 17

Bed leveling 18

Cura software 19

Display and controller 20

4. MAINTENANCE 22

Blue tape 23

The feeder 24

Lubricating the axes 25

Atomic Method 26

5. HELP & SUPPORT 28

Troubleshooting 29

Support 31

Safety and compliance 32

TABLE OF CONTENTS

ULTIMAKER 2 GO

This user manual is designed to help you start your Ultimaker 2 Go experience.

Learn everything about using your Ultimaker 2 Go by following the instructions in

this user manual and experience how easy it is to produce great quality prints.

You might be familiar with other types of Ultimakers or 3D printers. It is however

essential that you read this manual carefully in order to make the most out of your

Ultimaker 2 Go.

1 32

ULTIMAKER 2 GO AT A GLANCE

Display

SD card slot

Push/rotate button

Build plate

Build plate clamps

Build plate screws

Print head

Bowden tube

Print head cable

Spool holder

Power socket

Printing

Print technology Fused Filament Fabrication

Build volume 120 mm / 120 mm / 115 mm

Layer resolution Fast: 200 micron (0.2 mm)

Normal: 100 micron (0.1 mm)

High: 60 micron (0.06 mm)

Ulti: 40 micron (0.04 mm)

Positioning precision 12.5 micron / 12.5 micron / 5 micron

Filament diameter 2.85 mm (generally known as 3 mm ﬁlament)

Nozzle diameter 0.4 mm

Print speed 30 mm/s - 300 mm/s

Travel speed 30 mm/s - 350 mm/s

Software

Supplied software Cura - Ocial Ultimaker Software

File types STL / OBJ / DAE / AMF

Supported OS Windows / Mac / Linux

Electrical

AC Input 100 - 240 V

Approx. 1.4 AMPS

50 - 60 Hz

120 Watt max.

Connectivity Stand-alone SD card printing

Physical dimensions

Desktop space 258 mm / 250 mm / 287.5 mm

Shipping dimensions 400 mm / 310 mm / 550 mm

Weight 6.2 kg

Shipping weight 14.0 kg

Temperature

Ambient operation temperature 15 - 32 °C

Storage temperature 0 - 32 °C

Nozzle operation temperature 180 - 260 °C

Sound

Average operational noise 49 dBA

CAUTION: The Ultimaker 2 Go generates high temperatures and has hot moving parts that can cause injury. Never

reach inside of the Ultimaker 2 Go while it is in operation. Always control the Ultimaker 2 Go with the button on the

front or with the power switch on the back. Allow the Ultimaker 2 Go to cool down for 5 minutes before reaching

inside.

CAUTION: When opening the Ultimaker 2 Go for service, ensure that the power supply is turned o and the power

cable is disconnected from the wall socket.

CAUTION: Only use the power supply provided with your Ultimaker 2 Go.

SPECIFICATIONS

GETTING STARTED

Now your Ultimaker 2 Go has arrived you’re ready to unpack it and set it up!

Carefully unpack your Ultimaker 2 Go and set it up according to the instructions on

the next pages.

When you use your Ultimaker 2 Go for the ﬁrst time, it will guide you through some

steps to set it up and calibrate it. Follow the bed leveling and ﬁlament loading steps

carefully in order to set up your Ultimaker 2 Go correctly.

The Ultimaker 2 Go comes in reusable, durable packaging that has been specially designed to protect your Ultimaker 2

Go in transport. To properly unpack your Ultimaker 2 Go, please follow the steps described below.

START UNBOXING

After having opened the cardboard box in which your Ultimaker 2 Go was delivered the unboxing can begin. Start

unpacking by taking the Ultimaker 2 Go out of the cardboard box. You can best do this by carrying the belt and holding

the cardboard box while lifting the Ultimaker 2 Go.

OPEN IT UP

When the Ultimaker 2 Go has been taken out of the box you can loosen the belt that’s placed around the foam

packaging. This allows you to open the top cover, where you will ﬁnd the quick start guide and accessories.

REMOVE THE PACKAGING

Open up the complete packaging by lifting it at the hole at the side of the packaging. Now you can take out the spool

with PLA ﬁlament and place the Ultimaker 2 Go on your desk. Make sure you hold the Ultimaker 2 Go on the frame and

don’t hold it on the belts or axes while carrying it.

PLACE IT ON YOUR DESK

There is some packaging material under the build plate. You can easily remove it by lifting the build plate with your

hands. At last, cut the zip tie with which the print head is secured and your Ultimaker 2 Go is ready to use!

UNBOXING

WHAT’S INCLUDED?

Supplied with your Ultimaker 2 Go is an SD card in the 3D printer and several other accessories as well. This is

everything you need to start printing. Before continuing make sure to check if all accessories are included.

Power supply and cable

Spool holder

Glass plate

0.75 kg ﬁlament

USB cable

Blue tape

Grease

Hex wrenches (1.5 mm, 2 mm, 2.5 mm)

Calibration card

Test print

Spare parts (hot end, PT100 sensor)

510

Indice

Altri manuali Ultimaker Stampante 3D

Ultimaker

Ultimaker 2 Extended Manuale utente

Ultimaker

Ultimaker 3 Extended Manuale utente

Ultimaker

Ultimaker 2 Extended Manuale utente

Ultimaker

Ultimaker 2 Extended Manuale utente

Ultimaker

Ultimaker S5 Material Station Manuale utente

Ultimaker

Ultimaker 2 Extended Manuale utente

Ultimaker

Ultimaker S5 Material Station Manuale utente

Ultimaker

Ultimaker Original Manuale utente

Ultimaker

Ultimaker 3 Extended Manuale utente

Ultimaker

Ultimaker 2 Extended Manuale utente

Ultimaker

Ultimaker 2+ Connect Manuale per l'uso e la cura

Ultimaker

Ultimaker 3 Extended Guida all'installazione

Ultimaker

Ultimaker 2 Extended Manuale operativo e di manutenzione

Ultimaker

Ultimaker ORIGINAL+ Manuale utente

Ultimaker

Ultimaker S5 Material Station Manuale utente

Ultimaker

Ultimaker PVA Removal Station Manuale utente

Ultimaker

Ultimaker EXTRUSION UPGRADE Manuale utente

Ultimaker

Ultimaker S5 Material Station Manuale utente

Ultimaker

Ultimaker S5 Material Station Manuale utente

Ultimaker

Ultimaker EXTRUSION UPGRADE Manuale utente

Ultimaker

Ultimaker S5 Material Station Manuale utente

Ultimaker

Ultimaker 3 Extended Manuale utente

Ultimaker

Ultimaker 2 Extended Manuale utente

Ultimaker

Ultimaker ORIGINAL+ Manuale utente

Manuali Stampante 3D popolari di altre marche

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente

LONGER

LONGER LK4 Pro Manuale utente