Ultimaker S5 Material Station Manuale utente
EN
CS
DA
DE
ES
FI
FR
IT
HU
JA
KR
NL
NO
PL
PT
RU
SV
TR
ZH-S
ZH-T
AR
Quick
start
guide
Ultimaker S5 and
Ultimaker S5 Pro Bundle
Scan here to register your product
It takes 60 seconds to conrm ownership of your new
Ultimaker product. You will gain full access to a more
streamlined experience, plus important updates and
service information.
EN
CS
DA
DE
ES
FI
FR
IT
HU
JA
KR
NL
NO
PL
PT
RU
SV
TR
ZH-S
ZH-T
AR
Table of contents
EN English
CS Čeština
DA Dansk
DE Deutsch
ES Español
FI Suomi
FR Français
IT Italiano
HU Magyar
JA 日本語
KR
NL Nederlands
NO Norsk
PL Polski
PT Português
RU Русский
SV Svenska
TR Türkçe
ZH-S 简体中文
ZH-T 繁體中文
AR العربية
Ultimaker
S5 (Pro Bundle)
This quick start guide will help you set
up your Ultimaker S5 and Ultimaker S5
Pro Bundle for rst use.
The Ultimaker S5 is built to maximize
uptime with great print results and
a large build volume. By enhancing
this award-winning 3D printer with
What’s in the box?
Accessories
• Glass plate
• Spool holder with material guide*
• Power cable
• Ethernet cable
• USB stick
• Print core AA 0.4 (2x)
One of the AA print cores is already
insertedinto print head slot 1
Please retain all packaging
for warranty purposes.
Tools
• Hex screwdriver 2 mm
*Not required for the complete
Ultimaker S5 Pro Bundle
• Print core BB 0.4 (1x)
• XY calibration sheet
• Calibration card
• Nozzle cover (3x)
Consumables
• Tough PLA Black 750 g
•PVA 750 g
• Glue stick
• Oil
• Grease
the Material Station and Air Manager,
the Ultimaker S5 Pro Bundle boosts
productivity, exibility, and condence
to unlock demanding applications with
an extended range of materials.
EN
Safety messages
This quick start guide contains warnings and safety notices.
Provides additional information that is helpful to do a task or to
avoid problems.
Warns of a situation that may cause material damage or injuries
if one does not follow the safety instructions.
Ultimaker S5 and Ultimaker S5 Pro Bundle
This quick start guide describes different installation procedures. To install
the standalone Ultimaker S5, follow the instructions on the next page.
If you have the complete Ultimaker S5 Pro Bundle, skip these steps and go
straight to Install the Ultimaker S5 Pro Bundle. The sections Set up for rst
use and Start a print apply to both congurations.
Ultimaker
Stationsplein 32
3511 ED Utrecht
The Netherlands
+31 883 83 40 00
User manual
You can nd the full Ultimaker S5 and
Ultimaker S5 Pro Bundle user manuals,
available in English and many other
languages, on our website:
ultimaker.com/manuals
Support
For more information on technical
support visit ultimaker.com/support
or contact your local reseller
Install the Ultimaker S5
When placing the printer on a shelf or table,
take proper measures to prevent the printer
from falling.
The Ultimaker S5 should be lifted by at
least two people during installation.
1. Unpack the Ultimaker
S5 and remove all
accessories from
inside the printer
2. Remove the clamp
clips from the print
head and insert the
Bowden tubes
3. Secure the Bowden
tubes with the
clamp clips
4. Fit the print head cable
clips onto Bowden tube
2 and divide equally
5. Insert the spool holder
into the back panel
and push until it snaps
into place
6. Connect the spool
holder cable to the
NFC socket and secure
behind the cable clips
EN
7. Open the glass doors
and the front build
plate clamps to insert
the glass plate
8. Slide the glass plate
into the rear build
plate clamps, then
close the front clamps
and glass doors
9. Connect the power
cable to the printer
and the other end
to a power outlet
A power outlet with an earth connection must be used. Be sure that the
building installation has dedicated means for over-current and short-circuiting.
The Ultimaker S5 must be positioned out of direct sunlight when in use.
Install the Ultimaker S5 Pro Bundle
Choose a suitable location to place the
Ultimaker S5 Pro Bundle. Install the
products on a at, stable surface that
is capable of carrying the weight of
the total system (~ 50 kg / 110 lbs).
The Ultimaker S5 should be lifted by at
least two people during installation.
1. First unpack the
Ultimaker S5 and
remove all accessories
from inside the printer
2. Remove the clamp
clips from the print
head and insert the
Bowden tubes
3. Secure the Bowden
tubes with the
clamp clips
4. Fit the print head cable
clips onto Bowden tube
2 and divide equally
5. Open the glass doors
and the front build
plate clamps to insert
the glass plate
6. Slide the glass plate
into the rear build
plate clamps, then
close the front clamps
and glass doors
EN
7. Unpack the Material
Station and install it
according to steps 1-5
in the Material Station
quick start guide
8. Unpack the Air Manager
and install it according
to steps 1-10 in the
Air Manager quick
start guide
9. Connect the Ultimaker
S5, Material Station,
and Air Manager
as described on
the next page
1
2
3
4
Ultimaker S5 Pro Bundle connections
1. Connect the Air Manager cable to the
UMB OUT port on the Material Station
2. Connect the Material Station cable to the
UMB IN port on the Material Station and
the other end to the UMB OUT port on
the Ultimaker S5
3. Connect the power extension cable to the
Ultimaker S5 and the Material Station
4. Connect the power cable to the Material
Station and the other end to a power outlet
A power outlet with an earth connection
must be used. Be sure that the building
installation has dedicated means for
over-current and short-circuiting.
The Material Station will automatically
power on when power is supplied. This
way the humidity can be continuously
controlled while the door is closed.
The Ultimaker S5 Pro Bundle must
be positioned out of direct sunlight
when in use. Ensure there is at least
10 cm of space behind the Ultimaker S5
Pro Bundle for airow.
Altri manuali per S5 Material Station
6
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Ultimaker Stampante 3D
Ultimaker
Ultimaker PVA Removal Station Manuale utente
Ultimaker
Ultimaker 2 Go Manuale utente
Ultimaker
Ultimaker METHOD XL Manuale utente
Ultimaker
Ultimaker S5 Material Station Manuale utente
Ultimaker
Ultimaker S5 Material Station Manuale utente
Ultimaker
Ultimaker Ultimaker S5 Pro Bundle Manuale utente
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker 3 Extended Istruzioni operative
Ultimaker
Ultimaker 2 Extended Manuale operativo e di manutenzione
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker 3 Extended Guida
Ultimaker
Ultimaker S3 Manuale utente
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker 3 Extended Manuale utente
Ultimaker
Ultimaker 3 Extended Manuale utente
Ultimaker
Ultimaker 3 Extended Guida
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker 3 Extended Manuale utente
Ultimaker
Ultimaker S3 Manuale utente
Ultimaker
Ultimaker 2 Extended Manuale utente
