Ultimaker ORIGINAL+ Manuale utente
3Dkanjers: Wij gaan een 3D-printer bouwen
© 2014 | 3Dkanjers
The fast, easy to use, Open-source 3D printer
Assembly
instructions
3Dkanjers Bouwinstructie
Ultimaker Original +
Versie 1.0
3Dkanjers: Wij gaan een 3D-printer bouwen
© 2014 | 3Dkanjers
Wij gaan een 3D-printer bouwen
Wat gaan we doen?
Met je groepje bouw je jullie deel van de 3D-printer.
Ga eerst samen zitten en bespreek wat er moet gebeuren.
Daarna verdeel je de taken.
Als iedereen weet wat de bedoeling is, ga je aan de slag.
Aan het eind vertel je in de groep wat je hebt gedaan.
Zorg ervoor dat je verhaal duidelijk is, want iedereen moet weten waar jullie zijn gebleven.
Wat leer je hiervan?
Als je (een deel van) de 3D-printer hebt gebouwd:
•kun je zelfstandig informatie vinden over de 3D-printer;
•begrijp je de Engelse termen die worden gebruikt als je wilt gaan printen op een 3D-
printer;
•weet je hoe een 3D-printer werkt en uit welke onderdelen de 3D-printer bestaat;
•kun je later eventuele problemen met de 3D-printer zelf oplossen.
Wat heb je nodig?
De bouwbeschrijving van de 3D-printer. Deze vind je in hoofdstuk 6.
De onderdelen uit de doos. In de bouwbeschrijving staat precies per onderdeel wat je
nodig hebt om het te kunnen bouwen.
Gereedschap. In de bouwbeschrijving staat precies wat je nodig hebt aan gereedschap.
Bouwtips en Bouwinspectie. Voor elke stap in het bouwproces vind je aanvullende tips op
een apart blad. Je vind hierop ook een aantal punten waarmee je kan controleren of alles
goed gegaan is.
Hoe ga je het aanpakken?
De 3D-printer bestaat uit een aantal onderdelen (bijvoorbeeld het frame, de Z-stage en de
Material feeder). Per onderdeel vind je in de bouwbeschrijving een uitgebreide uitleg.
Zoek je onderdeel op en lees de beschrijving met elkaar goed door. Bespreek samen wat
er moet gebeuren en verdeel de taken. Ga dan pas de benodigde onderdelen bij elkaar
zoeken.
Tips?
•Gebruik bij het bouwen niet alleen de plaatjes als voorbeeld. Lees de bijbehorende
beschrijvingen.
•Je kan de Engelse teksten vertalen met Google translate of een woordenboek.
•Gebruik de juiste maat boutjes. De maten staan erbij.
•Gooi niets weg. Misschien hebben we het later nog nodig.
Wat is de planning?
In de werkplanning die je van de leerkracht krijgt, staat precies beschreven welk
onderdeel je met jouw groep gaat maken en hoeveel tijd je hiervoor hebt.
2
Ultimaker Original+ Assembly manual
Dear customer,
Thank you for purchasing the Ultimaker Original+ DIY kit and welcome to our community!
This assembly manual will guide you through the build process step by step.
During the excitement of the build process you learn more and more. This will
help you understand the workings of a 3D printer even better and give you the
opportunity to get the most out of your Ultimaker.
Besides this assembly manual there’s also a user manual available online:
www.Ultimaker.com/pages/support/manuals
www.Ultimaker.com/forum
Visit YouMagine for fun projects and free printable models: www.youmagine.com
Happy building and printing and we’ll be in touch!
Team Ultimaker
Contact information
We would love to hear from you. We are easy to reach and enjoy answering all
your questions. Technical assistance, sales enquiries or general information, we
are there for you. Find the information below to contact us.
General info@Ultimaker.com
Support support@Ultimaker.com
Sales sales@Ultimaker.com
Marketing/PR pr@Ultimaker.com
Phone +31 (0)345 712 017
Meet us online at:
3
Table of contents
1 Introduction 5
1.1 Product description 5
1.2 Used symbols 5
2 6
3 Precautions and safety instructions 7
4 Preparation before assembling 8
4.1 Engraving 8
4.2 Sanding 8
5 What to expect reading the assembly instructions 8
5.1 Structure of the assembly instructions 8
6 Assembling the Ultimaker Original+ 10
the frame 10
6.1.1. Step 1: Inserting the ball bearings 11
6.1.2. Step 2: Mounting the limit switches 12
6.1.3. Step 3: Assembling the X and Y motor 16
6.1.4. Step 4: Preparing the BOTTOM panel 19
6.1.5. Step 5: Assembling the ‘cube’-shaped frame 20
6.1.6. Step 6: attaching various parts 25
6.2.1. Step 1: Assembling the FRONT, BACK, RIGHT, LEFT slider
blocks 29
6.2.2. Step 2: Attaching the claws 30
6.2.3. Step 3: Mounting the caps 32
6.2.4. Step 4: Mounting the axes 36
6.3.1. Step 1: Assemble the extrusion head housing 43
6.3.2. Step 2: cooling fan assembly 51
6.3.3. Step 3: attaching the housing on the XY frame 53
6.4.1. Step 1: Assembling the Aluminium base plate. 58
4
6.4.2. Step 2: Assembling the Heated bed PCB 60
6.4.3. Step 3: Connecting the PCB to the Baseplate 62
6.4.7. Step 7: greas it up 69
6.5.1. Step 1: drive mechanism main body assembly 71
6.5.2. Step 2: drive bolt assembly 73
6.5.3. Step 3: clamp assembly 75
6.5.4. Step 4: attaching the feeder to the machine 80
6.6.1. Step 1: mounting the electronic circuit board 84
6.6.2. Step 2: connecting the heater and Heated Bed 85
6.6.3. Step 3: connecting the print head electronics 87
6.6.4. Step 4: connecting the limit switches 87
6.6.5. Step 5: connecting the motors 87
6.6.6. Step 6: mounting the electronics cover 89
6.6.7. Step 7: strain relief 89
6.7.1. Step 1: assembling the UltiController 93
6.7.2. Step 2: connecting the controller 95
7 Usage of the Ultimaker Original+ 96
7.1.1. Slicer software 97
5
1 Introduction
1.1 Product description
The parts of the Ultimaker Original+ can only be used for assembling the
Ultimaker Original+. An assembled Ultimaker Original+ can only be used for
Ultimaking B.V. cannot be held liable for any damage caused by improper,
incorrect or unwise use. Please read this manual completely and make sure
1.2 Used symbols
1 Warning! A warning indicates the risk of (serious) damage to the user or
the product if the user does not carry out the procedures with care.
1 Caution! A comment makes the user aware of possible problems.
5Notice: A notice makes the user aware of convenient functions and
additional options.
6
2
2.1
Product description
Name: Ultimaker Original+
Model/type: Revision 4
Year of production: 2014
Dimensions (W x D x H) 357 x 342 x 388mm
Mass 9 kg
Power source 110V or 230 V
Operating system: Windows, MAC and Linux
Speed: Max. head travel speed between
30mm/s - 300mm/s.
Accuracy: Positioning < 0.05mm
Technology: FFF (Fused Filament Fabrication)
Ambient Operating Temperature: 15° - 32° C
Storage Temperature: 0° - 32° C
2.2 Environmental conditions
The Ultimaker Original+ can only be used in a dry environment. The product
cannot be used in a humid environment and in an environment with lots of
performance of the product.
7
3 Precautions and safety instructions
Only use original accessories from the manufacturer.
The product should only be used for applications as described by
the manufacturer. All other applications are unprofessional and
considered dangerous. The manufacturer cannot be held liable for
damage resulting from errors, unintended or unprofessional use of
Do not install the product outdoors or in any place where it might
become wet.
Do not install the product in any place that might be exposed to
extreme heat or cold.
Keep the product out of reach of children.
Disconnect the device from all power sources before cleaning it.
Remove the adapter from the power outlet during storms, lightning
and whenever the product will not be used for a longer period of
time.
Install the product as indicated in this manual. If in doubt, consult a
recognized technician and always take account of local installation
codes and regulations.
The product should be kept out of direct sunlight.
The product must not be discarded as unsorted municipal waste, it
must be disposed of separately.
Find out about the options in your region for disposing of the
components, but see whether the product (components) can be
turned in, recycled or reused.
8
4 Preparation before assembling
4.1 Engraving
All panels are marked with the side they belong to.
For all the panels except the FRONT panel and the BOTTOM panel, the
engraving faces. The FRONT panel has the “Ultimaker” engraving facing
outward. The BOTTOM panel has the engraving facing downward.
4.2 Sanding
Before starting the assembly, you may want to sand the panels slightly to
remove any burn marks/blemishes from the laser cutting process. You can also
paint or stain your Ultimaker Original+. Be aware that paint will not cover the
brown cutting edges very well.
5 What to expect reading the assembly
instructions
5.1 Structure of the assembly instructions
Before assembling the Ultimaker Original+, separate sub assemblies have to be built.
The description of every sub assembly in this manual will contain:
• An overview of the needed tools;
• An estimation of the needed time to built the sub assembly;
• The steps;
Every step in this manual will be described using the following structure:
• Cautions and warnings (if applicable);
• The needed parts;
• The actions to perform the step.
To make this manual easy to understand, images are used as much as possible.
9
5.2
In this manual, you will read about FRONT side, BACK side, LEFT side,
image 1: sides of the Ultimaker Original+
Altri manuali per ORIGINAL+
2
Indice
Altri manuali Ultimaker Stampante 3D
Ultimaker
Ultimaker 2 Extended Manuale operativo e di manutenzione
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker EXTRUSION UPGRADE Manuale utente
Ultimaker
Ultimaker S5 Material Station Manuale utente
Ultimaker
Ultimaker 3 Extended Guida alla configurazione
Ultimaker
Ultimaker 3 Extended Istruzioni operative
Ultimaker
Ultimaker 2 Go Manuale utente
Ultimaker
Ultimaker 3 Extended Guida all'installazione
Ultimaker
Ultimaker Ultimaker S5 Pro Bundle Manuale utente
Ultimaker
Ultimaker 3 Extended Guida
Ultimaker
Ultimaker S5 Material Station Manuale utente
Ultimaker
Ultimaker 3 Extended Guida
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker S5 Material Station Manuale utente
Ultimaker
Ultimaker S5 Material Station Manuale utente
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker 2 Extended Manuale utente
Ultimaker
Ultimaker UM2 Manuale utente
Ultimaker
Ultimaker 2+ Connect Manuale per l'uso e la cura
Ultimaker
Ultimaker 3 Extended Manuale utente
