Uniz IBEE Manuale utente
DISCLAIMER
Please read and understand the contents of this installation and user manual.
Failure to read the manual may lead to personal injury, inferior results or damage to the
IBEE printers. Always make sure that anyone who uses the 3D printer knows and
understands the contents of the manual to make the most out of the IBEE printer.
The conditions or methods used for assembling, handling, storage, use or disposal of the device are beyond
our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility
and expressly disclaim liability for loss, injuries, damage, or expense arising out of or in any way connected
with the assembly, handling, storage, use or disposal of the product. The information in this document was
obtained from sources which we believe are reliable. However, the information is provided without any
warranty, express or implied, regarding its correctness.
Intended use
IBEE Series 3D printers are designed and built for liquid crystal display (LCD) based on Stereo lithography
Appearance (SLA) modeling for various high quality photopolymer resins within a commercial/business
environment. The combination of precision and speed makes the IBEE 3D printers the perfect machines for
concept models, functional prototypes and also the production of small series.
UNIZ does not warrant that the operation of the Hardware Product will be uninterrupted or error-free. UNIZ is
not responsible for damage arising from failure to follow instructions relating to the Hardware Product's use.
UNIZs warranty does not apply: a) to damage caused by use with non-UNIZ products including third-party
resins; b) to damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes; c)
to damage caused by operating the Hardware Product outside the permitted or intended uses described by
UNIZ; d) to damage caused by service (including upgrades and expansions) performed by anyone who is not
a representative of UNIZ; e) to a Hardware Product or part that has been modified to alter functionality or
capability without the written permission of UNIZ; f) to consumable parts, unless damage has occurred due
to a defect in materials or workmanship; g) to cosmetic damage, including but not limited to scratches, dents;
or h) if any UNIZ serial number has been removed or defaced. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE
OR COUNTRY TO COUNTRY. UNIZ's RESPONSIBILITY FOR HARDWARE DEFECTS IS LIMITED TO
REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY UNIZ IN ITS SOLE DISCRETION.
TABLE OF CONTENTS
A IBEE 3D PRINTER....................................................................1
MEET THE PRINTER.......................................................................................................................1
SPECIFICATIONS............................................................................................................................3
B GET STARTED .........................................................................4
UNBOXING ...................................................................................................................................4
SOFTWARE PREPARATION ............................................................................................................6
C INTERFACE INFORMATION .....................................................7
MAIN INTERFACE..........................................................................................................................7
SETTINGS ......................................................................................................................................7
TOOLS...........................................................................................................................................8
PRINT..........................................................................................................................................10
MORE DETAILS............................................................................................................................11
D USAGE AND MAINTENANCE.................................................13
PRINTER PLACEMENT AND LEVELING..........................................................................................13
BUILD PLATFORM .......................................................................................................................13
RESIN TANK ................................................................................................................................19
CHANGE LCD PROTECTIVE FILM ..................................................................................................24
CLEAN AIR FILTER........................................................................................................................26
E CONTACT US ........................................................................27
1
AIBEE 3D PRINTER
AIBEE 3D PRINTER
This user manual is designed to help you start your IBEE printer experience. Learn everything
about using your 3d printer by following the instructions in this user manual and experience how
easy it is to produce great quality prints.
You might be familiar with other types of 3D printers. Regardless, it is still essential that you read
this manual carefully in order to make the most out of your 3d printer.
MEET THE PRINTER
2
A IBEE 3D PRINTER
3
AIBEE 3D PRINTER
SPECIFICATIONS
IBEE
PRINTING
HARDWARE
110V 2A/220V 1A
-
DESKTOP
SOFTWARE
-
-
-
*Maximum accuracy only achievable at integer multiples of smallest pixel sizes.
4
BGET STARTED
BGET STARTED
Now your IBEE printer has arrived and
your printer and set it up according to the following instructions. Please keep the original box and
protectors in case of future shipping or storing.
UNBOXING
The IBEE comes in reusable, durable packaging that has been specially designed to protect your
printer in transport. To get the SN number of your printer, you may scan the QR code on the box.
To properly unpack your printer, please follow the steps described below.
START UNBOXING
Start unpacking by correctly orienting the cardboard box, and then slide the foam packaging out of
the box by pulling the cardboard handle beneath the printer while holding the box.
REMOVE THE PROTECTION FOAM
Remove the protection wrap around the machine. Take out the printer and place it on your desk.
Make sure you hold it by the sheet metal casing while carrying it.
PUT IT ON THE DESK
Place the printer on a leveled and clean desk. Adjust the four leveling screws under the printer to
level it.
GET THE ACCESSORIES
Under the Build Platform, you will find a box with accessories inside. Take these out and put them
aside.
5
B GET STARTED
6
BGET STARTED
SOFTWARE PREPARATION
Open a browser and go to URL https://www.uniz.com/software to download UNIZ Maker software.
Choose the software according to your system and download it.
INSTALLATION
Windows
UNIZ Maker supports Windows 7 and above. Please use the following steps:
1. Double click the installation program.
2. Check the user agreement, and then follow the prompts to finish the installation.
Mac
UNIZ Maker supports Mac OS X 10.7 and above. Please use the following steps:
1. Double click the installation program.
2. Agree to the user agreement.
3. Drag UNIZ to your Applications folder.
Note: Once your computer is connected to the Internet, UNIZ Maker will detect new versions
automatically and prompt whether you wish to update.
7
C INTERFACE INFORMATION
CINTERFACE INFORMATION
You may check device information, control the printer, and start printing projects using the touch
screen on the front of IBEE.
MAIN INTERFACE
Note: Some functions have 1~3 pages to introduce the details. Please read carefully and follow
the instructions.
SETTINGS
SET LAN
SET WIFI
There are three main functions:
Settings/Tools/Print.
Indice
Altri manuali Uniz Stampante 3D
