V-tech CS6400 Manuale utente

User’s manual

www.vtechcanada.com

Model: CS6400

Accessory handset for

use with VTech model

CS6449

Congratulations

on purchasing your new VTech product. Before using this

telephone, please read Important safety instructions on

pages 9-10 of this manual.

This manual has instructions on how to set up and register your

new handset. For complete instructions on using the handset, see

the user’s manual provided with your telephone base.

If you cannot nd your user’s manual, you can view or download it

at www.vtechcanada.com.

The ENERGY STAR®program (www.energystar.gov)

recognizes and encourages the use of products that save

energy and help protect our environment. We are proud

to mark this product with the ENERGY STAR® label

indicating it meets the latest energy efficiency guidelines.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identified with this logo have reduced noise and

interference when used with most T-coil equipped hearing

aids and cochlear implants. The TIA-1083 Compliant Logo is

a trademark of the Telecommunications Industry Association.

Used under license.

Table of contents

Getting started..........................................................................1

Parts checklist ............................................................................1

Battery installation ......................................................................2

Battery charging .........................................................................3

Add and register a handset ........................................................4

Deregister handsets ...................................................................5

Handset layout............................................................................6

Appendix ...................................................................................8

Battery ........................................................................................8

Important safety instructions.......................................................9

Precautions for users of implanted cardiac pacemakers..........11

Operating range........................................................................11

Maintenance.............................................................................12

About cordless telephones .......................................................13

The RBRC®seal .......................................................................14

FCC, ACTA and IC regulations ................................................15

Limited warranty .......................................................................18

Technical specications............................................................21

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in case it is necessary to ship

your telephone for warranty service.

Getting started

To purchase a replacement battery or power adapter, visit our

website at www.vtechcanada.com or call 1 (800) 267-7377.

User’s manual

Handset Battery compartment cover Battery

Handset charger

and charger adapter

User’s manual

Getting started

Battery installation

Install the battery as shown below.

Plug the battery connector securely into the socket inside the

handset battery compartment, matching the color-coded label.

Place the battery with the label THIS SIDE UP facing up and

the wires inside the battery compartment.

Align the cover flat against the battery compartment, then slide

it towards the center of the handset until it clicks into place.

Charge the handset by placing it in the handset charger. The

CHARGE light is on when the handset is charging.

If the handset will not be used for a long time, disconnect and

remove the battery to prevent possible leakage.

To purchase a replacement battery, visit our website at

www.vtechcanada.com or call 1 (800) 267-7377.

•

1 2

CHARGE light

remains on when

charging.

Getting started

Battery installation Battery charging

Once you have installed the battery, the screen indicates the

battery status (see the table below). If necessary, place the

handset in the handset charger to charge the battery. For best

performance, keep the handset in the handset charger when not

in use. The battery is fully charged after 11 hours of continuous

charging. See the table on page 8 for battery operating times.

If the screen is blank or displays Place in charger, you need to

charge the handset without interruption for at least 30 minutes to

give the handset enough charge to use the telephone for a short

time. When the battery is low, the handset displays Low battery

along with a flashing icon. If you are on a call in low battery

mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and

actions to take.

Battery indicators Battery status Action

The screen is blank,

or displays Place in

charger and

flashes.

Battery has no or

very little charge. The

handset cannot be used.

Charge without

interruption (about

30 minutes).

The screen displays

Low battery and

flashes.

Battery has enough

charge to be used for a

short time.

Charge without

interruption (about

30 minutes).

The screen displays

HANDSET X.

Battery is charged. To keep the battery

charged, place it in the

handset charger when

not in use.

If you place the handset in the handset charger without installing a

battery, the screen displays No battery.

Getting started

Add and register a handset

You can add new handsets (CS6400, purchased separately) to

your telephone base. Each handset must be registered to the

telephone base before use.

When rst purchased, each expansion handset alternately shows

1.Press FIND HS on base 4sec and 2.Then press # on handset.

The new handset should be charged without interruption for at

least 30 minutes before registering it to the telephone base. For

more details on battery charging, see page 3.

To register a handset:

Make sure the handset is out of the handset

charger and is put near the telephone base.

Make sure the handset alternately shows

1.Press FIND HS on base 4sec and

2.Then press # on handset before you

begin registration.

Press and hold FIND HANDSET on the

telephone base for about four seconds until

the telephone base shows Registering...

Please wait, then release the button.

Press #(pound key) on the handset. The

handset shows Registering... Please wait.

It takes up to 60 seconds to complete registration. Then

HANDSET X Registered appears on both screens, with

Xbeing the handset number, and the handset beeps. The

handset is now registered with the telephone base.

If registration fails, the handset displays Registration failed.

Please start again from Step 1 above.

You cannot register a handset if any other system handset is

in use.

The telephone base shows Registration slots are full when

you try to register more than 5 handsets to it.

If you have not set the date and time for the telephone system,

the handset will prompt you to set the date and time after it is

registered to the base. To skip setting, press OFF/CANCEL.

•

Getting started

Deregister handsets

If you want to replace a handset, or reassign the designated

handset number of a registered handset, you must deregister all

handsets that are registered to the telephone base. Then register

each handset individually.

To make deregistration easier, read all of the instructions on this

page before you begin.

To deregister all handsets:

Press and hold FIND HANDSET on the telephone base for

about 10 seconds until the telephone base shows Registering...

Please wait followed by Deregister all handsets?, then release

FIND HANDSET.

Immediately press MENU/SELECT or FIND HANDSET.

The deregistration process takes about 60 seconds to

complete. All handsets alternately show 1.Press FIND HS on

base 4sec and 2.Then press # on handset.

To register the handset(s) to the telephone base again, follow

the registration instructions on the previous page.

You cannot deregister all handsets if any other system handset

is in use.

If deregistration fails, you may need to reset the system and try

again. To reset, unplug the power from the telephone base and

plug it back in.

Even if the battery is depleted, you can still deregister all

handsets by following the steps above. After the handset is

charged for at least 10 minutes, its screen alternately shows

1.Press FIND HS on base 4sec and 2.Then press #

on handset.

•

Getting started

Handset layout

CHARGE light

On when the handset is charging in the

handset charger.

/ /VOLUME (directory)

Press to display the directory.

Press to scroll up while in menus or lists.

While entering names or numbers, press to

move the cursor to the right.

During a call or message playback, press to

increase the listening volume.

MUTE/DELETE

During a call, press to mute the microphone .

While the phone is ringing, press to silence the

ringer temporarily.

While reviewing the redial list, directory or call

log, press to delete an individual entry.

While predialing, press to delete digits.

/FLASH

Press to make or answer a call.

During a call, press to answer an incoming call

when you receive a call waiting alert.

While reviewing a call log entry, press

repeatedly to add or remove 1 in front of the

telephone number before dialing or saving it in

the directory.

TONE

Press to switch to tone dialing during a call if

you have pulse service.

(Speakerphone)

Press to make or answer a call.

Press to switch between the handset

speakerphone and the cordless handset.

Getting started

Handset layout

CID/ /VOLUME (caller ID)

Press to display the call log.

Press to scroll down while in menus or lists.

While entering names or numbers, press

to move the cursor to the left.

During a call or message playback, press

to decrease the listening volume.

MENU/SELECT

Press to show the menu.

While in the menu, press to select an item

or save an entry or setting.

OFF/CANCEL

During a call, press to hang up.

While in a menu, press to cancel an

operation, back up to the previous menu,

or exit the menu display.

While the phone is ringing, press to silence

the ringer temporarily.

Press and hold to erase the missed call

indicator when the handset is not in use.

Dialing keys

Press to enter numbers or characters.

Press to answer an incoming call.

# (pound key)

Press repeatedly to display other dialing

options when reviewing a call log entry.

INT

Press to initiate or answer an intercom call,

or to transfer a call.

REDIAL/PAUSE

Press repeatedly to view the last 20

numbers dialed.

While entering numbers, press and hold to

insert a dialing pause.

Indice

Altri manuali V-tech Cornetta

V-tech

V-tech DECT 6.0 CS6219 Manuale utente

V-tech

V-tech CS6719-2 Manuale utente

V-tech

V-tech DS6601 Manuale utente

V-tech

V-tech CTM-S2110 Manuale utente

V-tech

V-tech vt5820 Manuale utente

V-tech

V-tech SN5307 Manuale utente

V-tech

V-tech ES1500A Manuale utente

V-tech

V-tech CL6527A Manuale utente

V-tech

V-tech ErisTerminal VDP801 Manuale utente

V-tech

V-tech 17450 Manuale utente

V-tech

V-tech DS6405A Manuale utente

V-tech

V-tech i5803 - Cordless Extension Handset Guida utente

V-tech

V-tech CS6409 Manuale utente

V-tech

V-tech DS6421 Manuale utente

V-tech

V-tech LS5105 - Cordless Extension Handset Manuale utente

V-tech

V-tech Five Handset Expandable Cordless Phone System with BLUETOOTHA Wireless... Manuale utente

V-tech

V-tech 15750 Manuale utente

V-tech

V-tech VC7100A Manuale utente

V-tech

V-tech i 5807 Manuale utente

V-tech

V-tech LS6002 Manuale utente

V-tech

V-tech USB 711 Manuale utente

V-tech

V-tech DS6501 Manuale utente

V-tech

V-tech DS6101 Manuale utente

V-tech

V-tech IP 811 Manuale utente

Manuali Cornetta popolari di altre marche

Swissvoice

Swissvoice ePure HD Manuale utente

Philips

Philips TD6736/BH051P Manuale utente

ASCOM

ASCOM I62 - Manuale utente

LG-Ericsson

LG-Ericsson LIP-9010 Manuale utente

GE 1583 Manuale utente

iiNet

iiNet Handset Manuale utente

ASCOM

ASCOM 9p23 Manuale utente

AT&T

AT&T DLP70110 Manuale utente

AirCell

AirCell ST 3100 Manuale utente

Eaton

Eaton HHIR-LCD-PROG Istruzioni per il montaggio

Mitel

Mitel 112 Manuale utente

SBC

SBC SBC-381H Manuale utente

Mitel

Mitel 5602 Manuale utente

ASCOM

ASCOM d81 Messenger Istruzioni per l'installazione

SpectraLink

SpectraLink 7522 Manuale utente

Avaya

Avaya L100 Series Come usare

ooma

ooma HD2 Handset Manuale utente

Yealink

Yealink IPW56 Manuale utente