VALCOBABY TRI MODE EX Manuale di installazione e funzionamento

Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use.

Important: Please read the following instructions carefully before assembling this product. Retain this

guide in a safe place for future reference.

PRODUCT REFERENCE GUIDE

valco

baby

Due to our policy of continuous product

development, this product is constantly

evolving. It is possible that some

features or procedures outlined here

have changed since this document

was written. If you are unsure of any

procedure shown here, please contact

us via the web at info@valco.com.au to

obtain the most up to date information

before use. Include the batch number,

which can be found on a sticker on the

frame.

All pictures and diagrams herein are

provided for illustration purposes only.

Actual product, colour or fabric may vary.

Valco Baby reserves the right to modify

or alter any specication or colour

without notice or obligation to modify

any product previously purchased

FURTHER INFORMATION

In Australia/New Zealand

www.valco.com.au

www.valco.co.nz

In North America only

www.valcobaby.com

1800 610 7850

TRI MODE EX

assembly

FIGURE A

1. Remove the stroller from the carton and dispose

of all packaging thoughtfully including the black

rubber protectors on either side of the brake bar

and front wheel protector. The front wheel forks,

rear wheels, front bar and hood all need to be

installed prior to use.

2. Lay the stroller at on the oor and carefully cut

any cable ties which hold the frame.

3. Lift the handle upward to a vertical position.

FIGURE B

4. Lift the front wheel housing upward so that the

stroller frame unfolds from beneath.

5. Press down on the basket side locking

hinge with your hand or foot.

6. Secure the frame closed by swinging the

fold latches (located on both sides of the

frame) and fully engaging them tightly onto

the frame.

IMPORTANT WARNING: ALWAYS TEST

THAT ALL LATCHES ARE SECURELY

ENGAGED BEFORE USE.

ReaR WHeels

FIGURE C

7. Pressing on it’s centre hub button, insert the

Super Quick Release (SQR) axle through the

outside of the metal hub in each wheel.

IMPORTANT : INSERT THROUGH THE OUTSIDE OF

THE WHEEL, THE SIDE WHICH DOES NOT HAVE

THE BLACK BRAKE COG

8. Continue pressing the hub button and insert the

protruding long axle into the tube opening at the

rear of the stroller chassis; repeat this step for the

other side.

FIGURE D

9. To remove the wheel simply press the button in

the centre of the wheel hub and simultaneously

pull the wheel outward.

If your brakes do not engage, check to see that the nylon

brake cogs are on the INSIDE of each wheel when it is

attached to the chassis. If not, remove the wheel and

SQR axle and re-insert the SQR axle from the other side

of the wheel, so that the cog will be on the inside of the

wheel.

PRESS

THe FRONT baR

FIGURE E

10. Remove the plugs from the nylon housing at either side of the

stroller frame by pressing each inner “release button” and

pulling the plug upward. (Retain for future use, plugs must be

inserted if the bar is removed and the housings are not in use

for a Valco Baby approved accessory)

11. Insert the bar ends into the nylon housing located on either

side of the frame. Be sure that the bar is securely engaged

12. Adjust the front bar by simultaneously pressing the buttons

and swivelling the bar (forward or backward). NEVER use your

stroller with the front bar in the lowest position. This position is

ONLY for use when folding the stroller!

13. To remove the front bar: Feeling the side of the nylon housing

that sits below the frame at each side (facing inward), locate the

release “button.”

14. Press the release button inward while simultaneously pushing

upward on the bar housing. Repeat for the other side.

IMPORTANT WARNING: THE FRONT BAR IS NOT

A RESTRAINING DEVICE. ALWAYS RE-INSERT

THE PLUGS INTO THE HOUSING WHEN THERE IS

NOTHING INSERTED.

FRONT WHeel FORKs

FIGURE F

Your stroller utilizes our TRI-MODE™ front swivel system:

15. To install the front fork, rotate the TRI-MODE selection dial to

the centre (45°) position.

16. Tilt the stroller frame upward on the rear wheels.

17. Insert the fork shaft into the TRI-MODE housing till it “clicks”

into place.

To remove the front fork:

18. Rotate the TRI-MODE selection dial to the centre (45°)

position.

19. Tilt the stroller frame upward on the rear wheels.

20. Press the centre release button. The fork will then be released,

pull the forks downward to remove

sWIVel sysTem

FIGURE G

The TRI-MODE™ swivel system is as exible as it is functional over

a variety of terrains and uses.

21. LOCK: This position is best for use on extremely rough or soft

terrain such as sand etc which inhibit wheel swivel. To lock your

wheel, rotate the dial to the “LOCK” position. Swivel the wheel

around till it locks into position.

22. O: The central position locks the wheel into a tight 45° swivel

arc. This provides more stability for use with a toddlerseat or

when going down inclines.

23. SWIVEL: This position allows full, unfettered swivel action.

IMPORTANT: ALWAYS TEST THAT THE FORK IS

SECURELY ENGAGED IN THE HOUSING.

FOlDING yOUR sTROlleR

FIGURE H

24. Fold the hood back up against the handle.

25. Release the locking clamps at either side of the stroller.

FOlDING yOUR sTROlleR cont’d.

FIGURE I

26. Simultaneously lift the secondary safety catch and

swing the handle forward.

FIGURE J

27. Holding the frame at the rear, press down with your

foot on the rear basket tube. This will disengage the

basket side hinge locks.

28. Continue pressing on the rear of the basket, moving

the rear wheels forward beneath the frame.

FIGURE K

29. You can lock the frame closed by stretching the locking

strap over the frame, placing the catch over the rivet on

the chassis.

OPeNING yOUR sTROlleR

FIGURE L

30. To open, unhook the frame locking strap reversing the

previous step.

31. Holding on to the side of the footrest, with your foot

stopping the rear wheels, lift the handle so that the

frame begins to unfold.

OPeNING yOUR sTROlleR cont’d

FIGURE M

32. Press down on the side locking hinges (on the basket)

to lock the frame in the open position.

33. Secure the handle to the frame by engaging the

locking clamps on both sides.

IMPORTANT WARNING:

ALWAYS TEST THAT ALL LATCHES AND LOCKS ARE

SECURELY ENGAGED BEFORE USE.

seaT ReClINe

Your recline system offers an almost innite amount of seat

adjustments.

FIGURE N

34. RECLINE: While squeezing the centre release

mechanism in a pincer action, ease the seat down to

the desired position.

35. INClINe: Place your hand in the centre of the rear of the

seat.

36. Pull the incline strap while gently pushing on the rear

of the seat until the desired position has been reached.

IMPORTANT: ALWAYS TEST THAT THE SEAT IS SECURELY

LOCKED IN PLACE

UsING yOUR bRaKes

FIGURE O

37. Press the centre toggle down rmly with your foot until

you feel the wheels have locked.

38. To release, lift the centre toggle from beneath with

your foot.

IMPORTANT: ALWAYS TEST THAT THE BRAKE IS FULLY ENGAGED

WHEN ACTIVATED

INsTallING THe exPaNDa HOOD

FIGURE P

39. Place the plastic hood housings over the

corresponding housing on either side of the stroller

frame.

40. Align the straight track on the stroller housing with the

corresponding channel in the hood housing.

41. Slide the hood housing downward, engaging the track

fully in the hood channel so it fully engages onto the

stroller frame.

UsING THe exPaNDa HOOD

FIGURE Q

The Expanda hood unzips, increasing the size of your standard

hood to give greater coverage and protection from the sun and

weather for your child.

To open the Expanda Hood:

42. Locate the zip in the center of the Expanda Hood and unzip

completely

43. Gently pull the Expanda Hood forward until it is reaches its

full extension.

To close the Expanda Hood:

44. Gently push the Expanda Hood back, allowing the middle

section to fold in on itself.

45. Carefully zip the Expanda Hood closed.

IMPORTANT: ALWAYS TAKE CARE WHEN CLOSING THE

EXPANDA HOOD TO AVOID THE zIPPER CATCHING ON THE

ENCLOSED FABRIC

UsING THe aCCessORy zIP IN sysTem

FIGURE R

Your Expanda hood is tted with a front accessory zip system

which is used with a variety of handy optional accessories

these include our Valco 80% UV Zip in Mesh, Valco

Raincover and more

TO ATTACH OR REMOVE THE ACCESSORY:

46. Insert the zip track at the front of the Expanda

hood into the zip housing of the accessory. When

together, zip the length of the hood. Secure the sides of

the accessory to the stroller frame match up the snaps with

the corresponding snap mates on the underside of the stroller

frame and snap into place.

47. To secure the foot of the accessory to the stroller, pull the

elastic foot over the end of the stroller, and use the snaps

on the foot tabs to snap to the corresponding snap mates on

underside of the stroller frame.

seaT PaD aND INFaNT HeaDHUGGeR

FIGURE S

48. Your stroller is equipped with a removable ‘seat pad with

infant head hugger’ and shoulder harness covers. The head

hugger is designed to optimise the comfort of newborn babies

within the stroller. The Universal Head Hugger comes in two

parts: the seat pad and the infant head hugger. The infant

head hugger ts snuggly into the seat pad.

49. Make sure the Harness is unfastened. Place seat pad into

stroller. Thread the Harness buckle through the opening in the

seat pad. Release the Velcro fastening at the shoulder of the

seat pad. Pass the shoulder harness strap to the front of the

seat pad and reseal the Velcro. Repeat for other side. Position

the infant head hugger. Release the Velcro fastening at the

shoulder of the infant head hugger. Pass the shoulder harness

strap to the front and reseal the Velcro. Repeat for other side.

If required, adjust length of the harness so it ts snuggly but

not too tightly to child. To avoid damage to clothes, check that

all Velcro has been fastened and covered completely by the

pads. As your infant grows, remove the infant head hugger

when no longer needed by reversing the process.

Seat Pad

Infant

Hugger

UsING THe HaRNess

Your child MUST always be harnessed while in the stroller.

FIGURE T

TO OPEN YOUR HARNESS:

50. Push down on both buckle prongs and hold.

51. Simultaneously press the release button in the centre

of the buckle.

52. Lift the buckles from the buckle housing.

THIS PROCESS MAY BE DIFFICULT AS YOUR BUCKLE

SYSTEM HAS BEEN DESIGNED TO MEET VERY

STRINGENT SAFETY STANDARDS AND ENSURE THAT A

CHILD CANNOT RELEASE THE HARNESS UNAIDED.

TO SECURE YOUR CHILD IN THE

HARNESS:

FIGURE U

53. Overlap buckles and so that they

t together to form one complete

buckle.

54. Insert the completed buckle

into the buckle housing until it

engages securely in place.

TeTHeR sTRaP

FIGURE V

53. Your stroller has been equipped with a safety tether

strap. This strap has been designed to always keep your

stroller within constant reach.

IMPORTANT: ALWAYS SLIP THE LOOP IN THE STRAP

SECURELY OVER YOUR WRIST WHENEVER A CHILD IS IN

YOUR STROLLER.

PUSH

PRESS

DOWN

HOLD

DOWN

RELEASE

HOLD

CLICK

PUSH

PRESS

DOWN

HOLD

DOWN

RELEASE

HOLD

CLICK

In Australia/New Zealand

www.valco.com.au

www.valco.co.nz

In North America only

www.valcobaby.com

1 800 610 7850

valco

baby

WaRNING

• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER.

• DO NOT LEAVE CHILDREN UNATTENDED.

• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS PRAM/STROLLER.

• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE PRAM/STROLLER.

OTHERWISE THEY MAY BE INJURED.

Remember, your child’s safety is your responsibility...

•NeVeR Use ON sTaIRs OR esCalaTORs.

• AlwAys use the tether strAp when the stroller is in use.

• the CorreCt use AnD MAintenAnCe oF this VehiCle Are essentiAl.

• Be sure thAt All ClAMps AnD BuCkles Are seCurely FixeD AnD in plACe BeFore use

• when in the stroller, your ChilD Must AlwAys weAr the sAFety hArness, CorreCtly FitteD AnD ADjusteD, At

all TImes.

• the MAxiMuM weight oF the ChilD For whiCh this stroller wAs intenDeD is 22 kgs.

• the MAxiMuM height oF the ChilD For whiCh this stroller wAs intenDeD is 106 CM.

• CAn Be useD FroM A newBorn BABy up to 22kgs. A BAssinet or A CoCoon, speCiAlly DesigneD to Be useD with

A stroller, is reCoMMenDeD when Any Fully reClining stroller is useD with A newBorn.

• neVer run with A newBorn BABy in Any prAM or stroller until the ChilD CAn sit up unAssisteD

(ApproxiMAtely 6 Months).

• CheCk All pArts BeFore use For BreAkAge or FAtigue. DisContinue use iMMeDiAtely iF Any pArt is FounD to Be

DamaGeD OR bROKeN.

• MAxiMuM loAD oF BAskets: 3.5kgs.

• AlwAys Be AwAre oF the risks proViDeD By Fire AnD other signiFiCAnt sourCes oF heAt suCh As rADiAtors,

eTC. WHICH may be IN THe ImmeDIaTe VICINITy OF yOUR sTROlleR.

• it MAy Be unsAFe to use Any ACCessories other thAn VAlCo ApproVeD ones.

• this proDuCt is intenDeD For DoMestiC use only. it is not intenDeD For CoMMerCiAl use.

Should the chassis become wet, dry off promptly before storing. If this pram is used near the ocean or salted

roads, spray the chassis and seat frame with water and dry. We recommend a rust inhibiting product should

be used to prevent rust and fatigue on metal parts.

We recommend that you wipe down axles and lubricate the wheels every 3 months. Sand and dirt can grind

down axles, if you live near the beach or in a dusty environment you must wipe down the axles and wheels

then lubricate them monthly.

AXLES ARE BEST LUBRICATED WITH GREASE OR PETROLEUM JELLY. MOVING PARTS ARE BEST LUBRICATED

WITH SILICONE BASED PRODUCTS. DO NOT USE OIL BASED PRODUCTS.

Indice

Altri manuali VALCOBABY Passeggino

VALCOBABY

VALCOBABY Titan Manuale utente

VALCOBABY

VALCOBABY TRIMODE Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY EVO2 for 2 Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY URBAN ULTRALIGHT STROLLER Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY EZ Rider Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY VEEBEE DOUBLETAKE Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY Mini Marathon Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY Vee Bee SCOUT Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY BASSINET Manuale utente

VALCOBABY

VALCOBABY zee two Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY RunAbout Tri-mode series Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY REBEL Q Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY ION Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY Matrix Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY ZeeTwo Manuale utente

VALCOBABY

VALCOBABY Tri Mode Series Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY SPARK DUO Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY VEE BEE LIO Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY Runabout Series Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY SNAP Manuale utente

VALCOBABY

VALCOBABY Tri-Mode Twin Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY REBEL Q Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY snap ultra Manuale di installazione e funzionamento

VALCOBABY

VALCOBABY Latitude Stroller Manuale di installazione e funzionamento

Manuali Passeggino popolari di altre marche

Hauck

Hauck Priya Trioset Manuale utente

CHILDHOME

CHILDHOME CWQDN Manuale utente

Dreamer Design

Dreamer Design Rebound GST Manuale utente

Britax

Britax STEELCRAFT AGILE Manuale utente

Graco

Graco 7427 Manuale utente

Comfort

Comfort COMPASS Manuale utente

OBaby

OBaby Aura Manuale utente

Tutek

Tutek Tirso Manuale utente

Babify

Babify Dual Plus Manuale utente

Graco

Graco Stroller Manuale utente

Special Tomato

Special Tomato Jogger Manuale utente

Chicco

Chicco CORTINA TOGETHER TWO-PASSENGER STROLLER Manuale utente

Otto Bock

Otto Bock Kimba neo Manuale utente

Milly Mally

Milly Mally ROYAL Guida rapida

Hauck

Hauck DUETT 3 PRAM Manuale utente

BOB

BOB DUALLIE Manuale utente

Nuna

Nuna Pepp Manuale utente

Britax

Britax B2 Manuale utente