Velleman CCTVPROM17 Manuale utente

CCTVPROM17

CCTV PACK –DVR –4 IR CAMERAS –500 GB HARD DISK

CCTV-PACK –DVR –4 IR-CAMERA'S –HARDE SCHIJF 500 GB

PACK VIDEOSURVEILLANCE –DVR –4 CAMÉRAS IR –DISQUE DUR 500 GO

JUEGO DE VIGILANCIA –DVR –4 CÁMARAS IR –DISCO DURO 500 GB

CCTV-PACK –VIDEORECORDER –4 IR-KAMERAS –FESTPLATTE 500 GB

CONJUNTO CCTV DVR –4 CÂMARAS IR –DISCO RIGIDO 500 GB

ZESTAW MONITORINGOWY DVR –4 KAMERY IR –HD 500 GB

QUICK INSTALLATION GUIDE 3

KORTE HANDLEIDING 14

GUIDE D'INSTALLATION RAPIDE 26

GUÍA RÁPIDA 38

SCHNELLEINSTIEG 50

GUIA RÁPIDA PARA INSTALAÇÃO 62

SKRÓCONA INSTRUKCJA INSTALACJI 74

CCTVPROM17

V. 02 –28/08/2013 2 ©Velleman nv

DC 12V input terminal

Video output connector

DC 12V ingangsaansluiting

Video-uitgangsaansluiting

Connexion d‟entrée CC 12V

Connexion de sortie vidéo

DC 12V-Eingangsanschluss

Video-Ausgangsanschluss

Conexión de entrada CC 12V

Terminal de entrada DC 12V

Wejście zasilania DC 12V

Conexión de salida de vídeo

Conector de saída de vídeo

Złącze wyjściowe wideo

CCTVPROM17

V. 02 –28/08/2013 3 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device should be returned to your

distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, don't install or use it and contact your dealer.

Notes

This document is a Quick installation guide. For more detailed information, refer to the full user manual on

the included CD-ROM.

Product images are for illustrative purposes only. Due to constant product improvements the actual product

may differ from the images.

Package content

1 x DVR with built-in SATA connection: DVR8H2

4 x varifocal IR colour cameras: CAMCOLBUL30

4 x 20 m camera cables

1 x 19 V power supply

1 x high-efficiency DC-DC converter for DVR and cameras

hard disk (built in): HD500GB/S

remote control: DVRRC4.

2. Safety Instructions

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening

electroshocks. Have the device repaired by qualified personnel.

Always disconnect mains power when device not in use or when servicing or maintenance activities

are performed. Handle the power cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.

Never put objects filled with liquids on top of or close to the device.

Keep this device away from dust and extreme temperatures. Make sure the ventilation

openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front

of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to

the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

CCTVPROM17

V. 02 –28/08/2013 4 ©Velleman nv

Keep this manual for future reference.

DO NOT use this product to violate privacy laws or perform other illegal activities.

4. Overview

Refer to the illustrations on page 2 of this manual.

Front panel

LED

indicators

HDD is reading or recording.

DVR is powered on.

NAVIGATE

Press one of the four positions on the navigate button to move the cursor

up ( ), down ( ), left ( ) or right ( ).

In playback mode, press the buttons to play/pause ( ), stop ( ),

fast rewind ( ) or fast forward ( ).

In setting mode, press the up ( ) or down ( ) button to change the

setting in the menu.

Press MENU to enter the main menu.

ENTER

Press ENTER to confirm the setting.

LIST

Press to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME, or

select FULL to show all the event logs.

To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full

user manual.

PLAY

Press to play the recorded video.

SLOW

In playback mode, press to play the recorded file slowly.

ZOOM

In live or playback mode, press to enlarge the image of the selected channel.

SEQ

Press to show all screens sequentially in full screen mode. Press again to quit.

Press to show the multiple channel display mode.

1 –8

Press a button to select the corresponding channel.

AUDIO

= SLOW + ZOOM

Press SLOW and ZOOM simultaneously to select live or playback audio.

P.T.Z.

= SEQ. +

Press SEQ. and simultaneously to enter or exit PTZ control mode.

USB port

(2x)

Connect a USB flash drive for video backup to the left USB port ( ); connect a USB mouse

to the right port ( ).

Note: Do not connect two USB mice or two USB flash drives simultaneously.

Note: For a list of compatible USB flash drives, please refer to the appendices in the full user

manual.

Rear panel

VIDEO IN

8 video input channels to connect 8 external video sources e.g. cameras

MONITOR

1 video output channel to connect the DVR to the main monitor (composite)

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

CALL

connector for monitor specific for sequence display

AUDIO IN

4 audio input channels to connect four external audio sources, e.g. from cameras with audio

AUDIO OUT

1 audio output to connect to an audio device, e.g. a speaker (mono)

LAN port

Connect the DVR to a local network by plugging a network cable into this port.

HDMI

Connect to the HDMI port of a monitor that supports HDMI video output.

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

VGA

Connect to the VGA port of a monitor that supports HDMI video output.

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

CCTVPROM17

V. 02 –28/08/2013 5 ©Velleman nv

Rear panel

PUSH VIDEO

Alarm In

Connect an alarm device for event notifications to your smart phone (push video). The

alarm input 1 corresponds with video input 1.

DC 19V

power supply input

power switch

5. Hardware Setup

Connecting a Video Monitor

Obtain a suitable monitor (not included) and connect it to the MONITOR, HDMI, or VGA video output port on the

back of the DVR.

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

Connecting the Power Supply

1. Plug the DC output connector of the included power adaptor into the 19 VDC power input at the back of the

DVR.

Caution: Only use the included adaptor.

2. Plug the included power cable into the adaptor input connector and plug the other end into the mains. Do

not switch the DVR on yet.

Connecting a Camera

1. Obtain up to 8 suitable cameras (not included). Each camera needs its own power supply.

2. Connect the video output of the camera to either video input at the back of the DVR. The number next to

the input connectors represents the channel number. Connector type is BNC.

Connecting Audio

1. The DVR supports four audio inputs. Connect the audio output of an audio source to an audio input of the

DVR. Make sure to connect the audio channel to the corresponding video channel. Connector type is BNC.

2. There is also an audio output connector. Connect an audio device, e.g. a speaker, to this connector when

desired. Connector type is BNC.

Connecting Local Area Network (LAN)

Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR.

Connector type is 8P8C (RJ45). Setup is done through the OSD.

Connecting a USB Mouse

Connect a USB mouse to the right USB input port ( ) of the front panel.

6. Preliminary Settings

Make sure the connected cameras are on and set the power switch at the rear of the device to the on position.

The device takes about 15 to 30 seconds to start up.

Menu Overview

1. Press the MENU button and enter the password to open the menu.

Note: The default admin password is “0000” (4 times zero).

2. Right-click anywhere on the screen to open the main menu. Right-click again to close.

CCTVPROM17

V. 02 –28/08/2013 6 ©Velleman nv

QUICK START

GENERAL –TIME SETUP

DATE SETUP

DATE INFO –DAYLIGHT

SYSTEM

TOOLS –SYSTEM INFO

EVENT

INFORMATION

QUICK SEARCH –EVENT SEARCH –HDD INFO –EVENT LOG

ADVANCED

CONFIG

CAMERA –DETECTION –ALERT –NETWORK –SNTP –DISPLAY –RECORD –

REMOTE

SCHEDULE

SETTING

RECORD –DETECTION

For more information, refer to the full user manual.

Date and Time Setting

Before operating your DVR, please set the date and time on your DVR first.

Note: DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the

recorded data will be disordered and you will not be able to find the recorded file from backup by time search.

If users change the date or time accidentally when the recording function is activated, it is recommended to

clear all HDD data, and start recording again.

Note: When using the DVR for the first time, leave it powered on for at least 48 hours continuously after the

date and time is set correctly. It prevents DVR time from resetting if the DVR power is disconnected. If the DVR

time resets after power disconnection (for example caused by a power outage), the internal battery may run

down. In that case, you have to replace the internal battery. Please refer to the appendices in the full user

manual for more information.

1. Press the MENU button and enter the admin password to open the menu.

2. Select the QUICK START menu item.

3. Use the NAVIGATION button to move to the TIME SETUP menu item. Select it to set date and time.

Password Setting

1. Press the MENU button and enter the password to open the menu.

2. Select the SYSTEM menu item.

3. Go to TOOLS. Select ADMIN PASSWORD (or OPERATOR PASSWORD) and press the ENTER button to set the

password.

Note: An operator can not access the main menu, only the quick menu bar (see below).

4. Press the cursor up ( ) or down ( ) button to select the value of the first number and press enter

to save and go to the next character, or use the mouse to select the desired value. Repeat this for all four

password numbers.

Note: The default admin password is “0000” (4 times zero).

Record Settings

1. Press the MENU button and enter the password to open the menu.

2. Select the QUICK START menu item.

3. Select the GENERAL menu item using the NAVIGATION button.

4. Set the image size, image quality, and images per second for recording.

Refer to the full user manual on the included CD-ROM for more details.

Audio Playback

Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu

bar (see further in this manual). The current audio channel is indicated in the status bar.

Switching Users

1. The DVR can be accessed as administrator ( ) or operator ( ), icons are indicated in the status bar.

2. To switch between users, click on the user icon ( or ) to lock the current session ( ).

3. Press on the key lock icon ( ) then enter the password of the desired profile.

CCTVPROM17

V. 02 –28/08/2013 7 ©Velleman nv

7. Operation

Display

The following image shows the screen layout.

system date and time

general system status

available HDD capacity

channel status

live audio from audio channel 1-4

(indicated in white)

playback audio from audio channel 1-4

(indicated in yellow)

audio channel unselected

timer recording on

digital zoom on (yellow) / off

USB mouse connected

LAN connected / internet connected / no network connection

USB flash drive connected

overwrite on (default)

key lock on

PTZ mode

sequence mode

motion mode

recording mode

alarm mode

administrator logged on

operator logged on

Note that actual screen icons might differ slightly from the ones shown above.

Quick Menu Bar

Note: Only available when USB mouse is connected.

Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:

Open channel switch panel.

Show playback control panel.

Zoom-in mode (select desired channel first before entering zoom mode).

Select audio channel (live mode only live channels can be selected).

Enter PTZ mode and show PTZ control panel.

Recording

1. Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.

2. If the auto-recording and pre-alarm functions are enabled, the device will start recording images.

oBy default, the recording icon ( ) is displayed.

oIf the motion or alarm detection is activated and a motion or alarm is detected, the motion ( ) resp.

alarm ( ) icon is displayed.

CCTVPROM17

V. 02 –28/08/2013 8 ©Velleman nv

oIf timer recording is enabled, the timer recording icon ( ) is displayed.

oBy default, the device is in HDD overwrite mode and the icon ( ) is displayed.

Playback

Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick menu

bar to open the playback control panel:

progress bar

information bar

control bar

event search

Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device

will stop playback. For example, if the IPS is 30, the recording time should be at least 273 seconds

(8192 images / 30 IPS) for the playback to work properly.

Increase or decrease the playback speed using the fast forward ( ) and fast rewind ( ) buttons. Click

once to get 4x speed forward/backward, click twice to get 8x speed, etc. Maximum speed is 32x.

Press the pause button ( ) to pause playback.

Press the stop button ( ) to return to live monitoring.

Press the SLOW button once to get 1/4x speed playback, and click twice to get 1/8x speed playback.

There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.

1. To search an event, press the LIST button on the front panel (make sure the control panel is not locked).

An overview of the recorded file types (ALARM, MANUAL, MOTION, SYSTEM and FULL LIST) is shown.

2. Select the desired list and recording from the list.

3. Press ENTER to start playback.

Note: The recorded files can also be searched via the included Video Viewer software.

8. Push Video Configuration

8.1 Pin Connection

This DVR can send notifications to your mobile devices, such as iPhone, iPad, and Android mobile devices, if an

alarm event occurs (push video). However, only certain alarm-in pins support this function.

Push Video Alarm-In Terminal

A push video alarm-in terminal is provided on the DVR rear panel. Refer to the table below for the pin

connections that support push video and their corresponding video channels.

Alarm

Corresponding video channel

Alarm 1

CH1

CCTVPROM17

V. 02 –28/08/2013 9 ©Velleman nv

Alarm Sensor Connection

Connect the alarm sensor, such as magnetic contacts, to the push video alarm-in terminal on the DVR rear

panel.

8.2 Configuration

Before configuring push video, make sure that:

The DVR system is set up as described in Hardware Setup and Preliminary Settings.

The DVR is connected to internet.

You have installed the EagleEyes app on your iPhone, iPad, or Android mobile devices.

For details, please refer to Mobile Surveillance via EagleEyes.

To configure push video:

1. Right-click to show the main menu and select ADVANCED CONFIG > NOTIFY.

2. Set GUARD to ON.

3. Configure your alarm sensor type (normal open or normal closed).

Careful! You have to select the opposite type for push video to work correctly.

If your alarm sensor is N.C. (normal closed, alarm goes off when the contact opens), then select

ALARM N.O.

If your alarm sensor is N.O. (normal open, alarm goes off when the contact closes), then select

ALARM N.C.

ADVANCED CONFIG

CAMERA

PUSH VIDEO

PUSH MESSAGE

MESSAGE MAIL

VIDEO MAIL

DETECTION

GUARD

ALERT

CH01

ALARM OFF / INTERNAL ALARM



CH1

NETWORK

DISPLAY

RECORD

DEVICES

DCCS

IVS

NOTIFY

EXIT

4. Open EagleEyes and add this DVR to the EagleEyes address book.

Note: For more information on EagleEyes operation, please visit www.eagleeyescctv.com.

CCTVPROM17

5. Enable push video.

6. Trigger the input alarm.

7. Receive an event notification and see video.

9. Mobile Surveillance via EagleEyes

EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation.

Note: For more operations details about EagleEyes, visit http://www.eagleeyescctv.com.

For any comment or question about this program, contact Velleman. Visit www.velleman.eu for contact details.

9.1 Prerequisite

Before installing EagleEyes on your mobile phone for remote surveillance, make sure you have checked the

following:

Your mobile platform is iPhone, iPad, BlackBerry, or Android.

You have subscribed to mobile internet services on your phone; the service is available for use on your

phone.

Note: You may be charged for internet access via wireless or 3G networks. For the internet access rates,

contact your local network operator or service provider.

You have noted down the IP address, port number, user name, and password used to access your network

camera via internet.

9.2 Downloading EagleEyes

1. Connect to www.eagleeyescctv.com from your mobile device.

Note: Do not download EagleEyes from your computer.

2. Select Products > Software > Mobile app to access the EagleEyes introduction page.

3. Select your platform (iOS, BlackBerry, or Android) and download the program you need.

Note: This DVR is compatible only with iPhone, iPad, BlackBerry, and Android mobile devices.

4. Follow the on-screen instructions for downloading.

When the download is completed, EagleEyes is installed automatically on your mobile device.

Note: For more information about the configuration of this program, read the related instructions on the

download page.

Altri manuali per CCTVPROM17

Indice

Lingue:

Altri manuali Velleman Sistema di sicurezza

Velleman

Velleman HAM201 Manuale utente

Velleman

Velleman DWH Series Manuale di servizio

Velleman

Velleman CCTVPROM6 Manuale utente

Velleman

Velleman CAMSETW1 Manuale utente

Velleman

Velleman DWH G955 Manuale di servizio

Velleman

Velleman High-Q Velleman-kit K3505 Manuale utente

Velleman

Velleman HAM202 Manuale utente

Velleman

Velleman ISPROM1 Manuale utente

Velleman

Velleman HAM1000WS Manuale utente

Velleman

Velleman CCTVPROM14 Manuale utente

Velleman

Velleman ELRAK Manuale utente

Velleman

Velleman AVMOD16N1 Manuale utente

Velleman

Velleman HAM202 Manuale utente

Velleman

Velleman HAM982K Manuale utente

Velleman

Velleman CU2101/KIT Manuale dell'operatore

Velleman

Velleman CCTVPROM17 Manuale utente

Velleman

Velleman Camcolbul12 Manuale utente

Velleman

Velleman K8093 Manuale utente

Velleman

Velleman HAA80 Manuale utente

Velleman

Velleman HAM222 Manuale utente

Velleman

Velleman CCTVPROM16 Manuale utente

Velleman

Velleman CCTVPROM7 Manuale utente

Velleman

Velleman CTC1000SI Manuale utente

Velleman

Velleman CAMSET2 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente