Vislink FCDT-ASSY-7002 Manuale utente

Vislink, Waterside House, Earls Colne Business Park, Colchester, Essex, CO6 2NS, UK

Telephone: +44 (0)1442 431300 ● Facsimile: +44 (0) 1494 775356 ● Email: sales@vislink.com ● Website: www.vislink.com

Company Registered in England & Wales no. 10523708 ● VAT registration no. GB 260 012 169

Registered Office: Waterside House, Earls Colne Business Park, Colchester, Essex, CO6 2NS, UK

Issue No: M Page: ii

The information contained in this manual remains the property of Vislink and may not be

used, disclosed or reproduced in any other form whatsoever without the prior written

permission of Vislink.

Vislink reserves the right to alter the equipment and specification appertaining to the

equipment described in this manual without notification.

This document is supplied on the express terms that it is to be treated as confidential and

that it may not be copied, used or disclosed to others for any purpose except as authorized

by Vislink.

Some images used are for illustration purposes only and may differ from the actual

supplied components.

NOTE: Notes are used to convey additional information.

CAUTION: Cautionary notes are given where potential equipment damage could occur.

WARNING: Warnings are shown where there is potential for personal danger or death. This

warning should be read and understood before attempting to carry out any

work on any equipment attached or related to the equipment in use. The

danger is real and not understanding the warning could lead to injury, harm or

potential death.

Issue No: M Page: iii

Issue

Date

Changes

April 2015

First issue

07/10/2015

Useful Part numbers –Change OCP5 Reference

13/11/2015

Added GV Data cable information

SAR safety recommendations added

11/01/2016

Ikegami information added

11/02/2016

‘Scan’ mode information added

22/02/2016

8.1 LDK Part Number updated.

Updated the document template and layout - non -technical changes.

18/04/2016

‘Send All’ information added.

Ethernet connection between IDU to IDU information added.

Grass Valley ‘one to one’ information added.

Data connection changed from 5pin to 3pin XLR.

18/5/2016

Included information for Sony PXW-X320 camera

Included Hitachi “send-all” information

3/6/2016

Added Section 1.6 Emissions for FCC compliance.

24/8/2016

Included Sony HDC-1700 Camera information.

Included Ikegami HDK-97C Camera & OCP-100 Controller information.

Sony ‘Auto RCP Off’ Information added.

Grass Valley Cable added.

29/11/2016

Included Sony HDC-4300 Camera information.

Included FC/UPC model variant.

Updated System Configuration image.

Included Panasonic PTZ information.

Updated Grass Valley information.

Included Sony Scene File recall information.

29/3/2017

Included Sony PDW-700 Camera information

Updated Grass Valley ‘Multiplexing’ information

Updated Panasonic PTZ Return Data information

Updated Ethernet connection information

Included ‘Transparent Mode’ information

Included L1700 Data Rx information

Included Grass Valley RS422 Multiplexing cable

Included G Valley OCP400 Multiplex cable and defined the Non-Multiplex cable in

Table 7-2.

14/09/2017

Corrected Section 3.4 to update the software menu list

Issue No: M Page: iv

1. General Information .................................................................................................. 1

1.1. General Safety Information.....................................................................................................1

1.2. Environmental .........................................................................................................................1

1.3. Disposal Instructions ...............................................................................................................2

1.4. CE Compliance.........................................................................................................................2

1.5. Health & Safety - Exposure to Non-Ionizing (RF) Radiation/Safe Working Distances.............3

1.6. Emissions .................................................................................................................................4

1.6.1. FCC...........................................................................................................................................4

1.6.2. Safety Warning ........................................................................................................................4

1.6.3. Radio Specifications:................................................................................................................5

2. Wireless Camera Control System ............................................................................... 7

2.1. Typical System Configuration ..................................................................................................8

2.2. Frequency Programming and Available Frequency Bands......................................................9

3. Camera Control Interface Unit - CRIU-ASSY-7XXX ..................................................... 11

3.1. Introduction...........................................................................................................................11

3.1.1. Compatible Camera Types with Manufacturer OCP/RCP......................................................12

3.1.2. Compatible OCP Type Cameras.............................................................................................12

3.2. Specifications.........................................................................................................................13

3.2.1. Controls and Indications........................................................................................................13

3.2.2. Specifications.........................................................................................................................13

3.3. Pin Out Connection Tables ....................................................................................................14

3.3.1. Camera Control Interface Unit ..............................................................................................14

3.4. Menu Structure .....................................................................................................................17

3.4.1. Camera Control Interface Unit ..............................................................................................17

3.4.2. Basic Setup Guide..................................................................................................................22

3.4.3. Licenses..................................................................................................................................22

3.4.4. Additional Interface Units .....................................................................................................23

3.4.5. Additional Transmitter Units.................................................................................................23

3.4.6. Return Data Connections ......................................................................................................24

3.4.7. Head Scanning Mode.............................................................................................................24

3.4.8. Sony Send All Operation........................................................................................................25

3.4.9. Sony Auto RCP Off Operation................................................................................................26

3.4.10. Sony Scene File Recall Operation ..........................................................................................26

3.4.11. Sony PMW-F55 Configuration ...............................................................................................26

3.4.12. Hitachi Send All Operation ....................................................................................................26

3.4.13. Interface Unit to Interface Unit - Ethernet Connection ........................................................27

3.4.14. Grass Valley Configuration ....................................................................................................28

3.4.15. Grass Valley Send All Operation ............................................................................................29

3.4.16. Transparent Mode.................................................................................................................29

Issue No: M Page: v

4. Camera Control Data Transmitter - FCDT-ASSY-7XXX................................................ 31

4.1. Introduction...........................................................................................................................31

4.2. Specifications.........................................................................................................................31

4.2.1. Controls and Indicators .........................................................................................................32

4.3. Switch Position ......................................................................................................................32

4.4. Pin Connections.....................................................................................................................33

4.4.1. Camera Control Data Transmitter Unit .................................................................................33

4.5. Data Transmitter Antenna.....................................................................................................33

5. Data Receiver .......................................................................................................... 35

5.1. Introduction...........................................................................................................................35

5.2. Specifications.........................................................................................................................36

5.2.1. Data Receiver.........................................................................................................................36

5.3. InCam-G CABK-ASSY-7xxx......................................................................................................36

5.3.1. InCam-G Connections............................................................................................................37

5.4. InCam-S CABK-ASSY-7xxx.......................................................................................................38

5.5. Clip-on4 Data Receiver CCCU-ASSY-7xxx...............................................................................39

5.5.1. Clip-on4 Camera Control Connections ..................................................................................39

5.6. Standalone Data Receiver DR07-ASSY-7XXX .........................................................................40

5.6.1. Standalone Data Receiver Connections ................................................................................41

5.7. L17xx Built-in Data Receiver..................................................................................................42

5.7.1. L17xx Built-in Data Receiver..................................................................................................42

5.7.2. L17xx with FocalPoint, Camera Control Flexibility ................................................................42

6. Operators Control Panel (OCP5) OCP5-ASSY-7XXX.................................................... 43

6.1. General Description...............................................................................................................43

6.1.1. System Configuration ............................................................................................................43

6.1.2. Tally........................................................................................................................................43

6.1.3. Powering the OCP5................................................................................................................43

6.1.4. Data Connections to the OCP5..............................................................................................44

6.1.5. OCP5 Control Functions.........................................................................................................44

6.1.6. OPT Button ............................................................................................................................44

6.2. OCP5 Connections and Pinouts .............................................................................................45

6.2.1. OCP I/F...................................................................................................................................45

6.2.2. Data In/Out............................................................................................................................45

6.2.3. Mixer Connector....................................................................................................................46

6.2.4. DC Input.................................................................................................................................46

6.2.5. USB/Ethernet.........................................................................................................................46

6.3. Camera Types ........................................................................................................................47

6.4. OCP5 Menu Structure............................................................................................................48

6.4.1. Sample Control Screen ..........................................................................................................49

7. Useful Part Numbers................................................................................................ 51

8. Camera Control Data Receiver Cables ...................................................................... 55

8.1. Grass Valley LDK –Clip-on4...................................................................................................55

8.1.1. External Camera Control Cable .............................................................................................55

Issue No: M Page: vi

8.2. Grass Valley LDK –DR07........................................................................................................55

8.2.1. External Camera Control Cable .............................................................................................55

8.3. Sony –Clip-on4......................................................................................................................55

8.3.1. External Camera Control Cable .............................................................................................55

8.4. Sony –DR07...........................................................................................................................56

8.4.1. External Camera Control Cable .............................................................................................56

8.5. Hitachi –ClipOn4 ...................................................................................................................56

8.5.1. External Camera Control Cable .............................................................................................56

8.6. Hitachi –DR07 .......................................................................................................................57

8.6.1. External Camera Control Cable .............................................................................................57

8.7. Ikegami –Clip-on4.................................................................................................................57

8.7.1. External Camera Control Cable .............................................................................................57

8.8. Ikegami –DR07......................................................................................................................57

8.8.1. External Camera Control Cable .............................................................................................57

8.9. Panasonic ENG –Clip-on4 .....................................................................................................58

8.9.1. External Camera Control Cable .............................................................................................58

8.10. Panasonic ENG –DR07 ..........................................................................................................58

8.10.1. External Camera Control Cable .............................................................................................58

9. Camera Control Interface to OCP/RCP Cables........................................................... 59

9.1. Sony RCP Cable......................................................................................................................59

9.2. Hitachi RU Cable ....................................................................................................................59

9.3. Ikegami OCP Cable.................................................................................................................60

9.4. Panasonic ENG RCP Cable......................................................................................................60

9.5. Vislink OCP5 Cable.................................................................................................................61

9.6. Grass Valley OCP Cable - RS232 (Non-Multiplexing).............................................................61

9.7. Grass Valley OCP Cable –RS422 (Multiplexing) ....................................................................62

Issue No: M Page: vii

FIGURE 2-1 TYPICAL SYSTEM CONFIGURATION ............................................................................... 8

FIGURE 3-1 CRIU-ASSY-7XXX OVERVIEW........................................................................................ 11

FIGURE 3-2 FRONT PANEL OVERVIEW ........................................................................................... 13

FIGURE 3-3 REAR PANEL OVERVIEW.............................................................................................. 13

FIGURE 4-1 FCDT-ASSY-7XXX OVERVIEW ....................................................................................... 31

FIGURE 4-2 FCDT-ASSY7XXX CONNECTORS AND INDICATORS OVERVIEW.................................... 31

FIGURE 4-3 FCDT-ASSY7XXX SWITCH LOCATIONS.......................................................................... 32

FIGURE 5-1 DATA RECEIVER OVERVIEW......................................................................................... 35

FIGURE 5-2 INCAM-G OVERVIEW................................................................................................... 36

FIGURE 5-3 INCAM-S OVERVIEW.................................................................................................... 38

FIGURE 5-4 CLIP-ON4 DATA RECEIVER OVERVIEW ........................................................................ 39

FIGURE 5-5 STANDALONE DATA RECEIVER OVERVIEW ................................................................. 40

FIGURE 5-6 L1700 CAMERA TRANSMITTER.................................................................................... 42

FIGURE 6-1 OPERATORS CONTROL PANEL OVERVIEW .................................................................. 43

FIGURE 6-2 OCP5 REAR CONNECTIONS OVERVIEW....................................................................... 45

FIGURE 6-3 OCP5 MENU STRUCTURE ............................................................................................ 48

FIGURE 6-4 EXAMPLE MAIN OPERATOR SCREEN........................................................................... 49

FIGURE 6-5 EXAMPLE SETUP SCREENS........................................................................................... 49

FIGURE 7-1 USEFUL PART NUMBERS ............................................................................................. 51

FIGURE 7-2 WIRELESS CAMERA RECEIVERS ................................................................................... 53

TABLE 1-1 AC INPUT WIRE CONFIGURATION................................................................................. 2

TABLE 1-2 SAFE WORKING DISTANCE ............................................................................................ 3

TABLE 2-1 FREQUENCY PROGRAMMING AND AVAILABLE FREQUENCY BANDS............................ 9

TABLE 3-1 COMPATIBLE OCP/RCP TYPE CAMERAS ...................................................................... 12

TABLE 3-2 COMPATIBLE OCP TYPE CAMERAS.............................................................................. 12

TABLE 3-3 CRIU-ASSY-7XXX PANEL CONNECTORS OVERVIEW..................................................... 13

TABLE 3-4 CRIU-ASSY-7XXX SPECIFICATIONS ............................................................................... 13

TABLE 3-5 CRIU-ASSY-7XXX MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS .................. 14

TABLE 3-6 EXPANDER MODULE PART NUMBERS......................................................................... 23

TABLE 4-1 FCDT-ASSY7XXX CONNECTORS, CONTROLS, INDICATORS AND FIXINGS .................... 32

TABLE 4-2 MECHANICAL AND ENVIRONMENTAL DETAILS........................................................... 32

TABLE 4-3 SWITCH CONFIGURATION TABLE ................................................................................ 32

TABLE 5-1 INCAM-S POWER SWITCH FUNCTIONS ....................................................................... 38

TABLE 5-2 L17XX WITH FOCALPOINT CAMERA CONTROL CONFIGURATION OPTIONS............... 42

TABLE 6-1 OCP5 CONTROL FUNCTIONS ....................................................................................... 44

TABLE 6-2 OCP5-ASSY-7XXX CAMERA TYPES................................................................................ 47

TABLE 7-1 USEFUL UNIT PART NUMBERS .................................................................................... 52

TABLE 7-2 USEFUL CABLE PART NUMBERS .................................................................................. 53

TABLE 7-3 WIRELESS CAMERA RECEIVERS ID TABLE .................................................................... 53

Issue No: M Page: viii

This page is intentionally unused.

User Manual Focal Point

General Information

Issue No: M Page: 1

To ensure awareness of potential hazards, personnel concerned with the operation or

maintenance of the equipment must read and understand the following information,

together with local site regulations.

WARNING: RF Power Hazard - High levels of RF power are present in the Camera Control

Data Transmitter unit. Exposure to RF or microwave power can cause burns

and may be harmful to health. Always switch off the power before removing

covers or disconnecting RF cables and before inspecting damaged cables or

antennas.

WARNING: Avoid standing in front of high gain antennas (such as a dish) and never look

into the open end of a waveguide or cable where RF power may be present.

WARNING: We strongly recommend returning equipment requiring RF servicing to Vislink.

WARNING: GaAs / BIO Hazard - Certain internal components contain Gallium Arsenide and

Beryllium Oxide, which are toxic substances. While safe to handle under

normal circumstances, individual components must not be cut, broken apart,

incinerated or chemically processed. In the case of Beryllium Oxide, a white

ceramic material, the principal hazard is from the dust or fumes which are

carcinogenic if ingested, inhaled or enter the body via damaged skin.

WARNING: Connecting to the AC supply and protective earth: The Camera Racking

Interface Unit is a Class 1 device and must be connected to a protective earth

when used with an AC supply. Failure to provide this earth may result in high

voltage on the unit chassis. Always install in-line with local wiring regulations.

WARNING: Tantalum Capacitors: When these components are subjected to reverse or

excess forward voltage, ripple current or temperatures, they may rupture and

cause personal injury.

CAUTION: This system contains MOS devices. Electro-Static Discharge (ESD) precautions

should be employed to prevent accidental damage.

The FocalPoint System is IPX0 rated. It should not be exposed to dripping or splashing

water/liquid. When used outdoors, a suitable rain cover is required to protect the unit.

User Manual Focal Point

General Information

Issue No: M Page: 2

DO NOT dispose of any equipment, including batteries, as household waste. The

equipment and batteries are not bio-degradable in landfill sites.

WARNING: DO NOT incinerate Batteries. Batteries can suddenly explode under extreme

temperature and cause personal injury.

Vislink offer a battery disposal service. Before shipping, you are required to advise the

Vislink sales team (Hemel Hempstead, UK) of your intent to return any batteries.

To do this call on: +44 1442 431 300

The equipment is supplied with an AC supply connector and cord assembly. The wires in

the cord are colored in accordance with the following convention:

Wire Color

Wire Function

Green and yellow

Earth (Ground)

Blue

Neutral

Brown

Live

Table 1-1 AC Input Wire Configuration

Always ensure that the equipment is correctly connected. Failure to connect the

equipment correctly may render protective devices inoperable. If in doubt consult a

qualified electrician.

CAUTION: The front panel DC power switch is a standby function only, some of the

components remain powered.

An AC isolator switch is fitted on the rear panel adjacent to the AC input connector; in

normal use the equipment should be positioned such that this switch remains readily

accessible. To be certain that the equipment is isolated from the AC supply, always unplug

it from the AC outlet.

The FocalPoint System is compliant under the ETSI R&TTE directive.

The Camera Control Data Transmitter is compliant to CE (!). The (!) symbol warns the

operator that the unit is an intentional radiator and that the operating frequency may not

be authorized in some territories. It is your responsibility as the operator to ensure that

you possess the required valid local authority license(s) and site clearances for the

intended operating frequencies, geographical location and times of operation of the

equipment.

You are also responsible for the proper setup, operation and maintenance of the system,

to ensure that it complies with the limits specified by the license.

NOTE: Shielded cables must be used with this equipment in order to ensure that it meets

the emissions limits for which it was designed. It is your responsibility, as the user,

to obtain and use good quality shielded cables with this device. Shielded cables are

available from most retail and commercial suppliers of cables designed to work

with radio equipment and personal computer peripherals.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Sistema di controllo popolari di altre marche

Pentair Pool Products

Pentair Pool Products Compool Manuale utente

ComfortNET

ComfortNET CTK04 Manuale utente

Fireye

Fireye InSight II 95DSS3 Manuale utente

CAME

CAME G3000 Manuale utente

Idemia

Idemia MorphoAccess VP MD Manuale utente

Axis

Axis P1445-LE-3 Manuale utente

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuale utente

CNC-Step

CNC-Step High-Z T-Series Manuale utente

Doosan

Doosan DVF Series Manuale utente

Honeywell

Honeywell KAP 140 Manuale utente

Honeywell

Honeywell vk41 series Manuale utente

AirBench

AirBench FPW Guida all'installazione

Cypress

Cypress HHR-3160 Manuale utente

CAME

CAME GLT40AOS Manuale utente

Zonex

Zonex GEN II -VVT Guida utente

Altronics

Altronics K 9650 Manuale utente

micro-trak

micro-trak RoadMaster Manuale utente

micro-trak

micro-trak Calc-An-Acre II Manuale utente