ViTiny UM30 Manuale utente
Version 1.0A
UM30 User’s Guide
4K DiGi Microscope
1
Contents
1. Product Introduction .......................... 2
1.1 Packing Contents ........................ 2
1.2 Assemble microscope with stand 2
1.3 IR Remote controller ................... 4
1.4 Microscope menu functions ...... 11
1.5 Microscope introduction: .......... 18
1.6 Microscope Focus ..................... 22
1.7 Microscope accessory ............... 25
2. Printed Notice .................................. 26
2.1 Maintenance ............................ 26
2.2 Product Specification ................ 27
2.3 Safety Instructions .................... 28
2
1. Product Introduction
1.1 Packing Contents
The box contains microscope and accessories. The Object Lens 4X
is already assembled onto microscope.
Item
Q’ty
Item
Q’ty
DiGi Microscope
1
White
Balance Card
1
HDMI Cable
1
IR Remote Control
1
USB
mini
Cable
1
User’s Guide
1
Power adaptor
1
Calibrator
1
S107 Stand
1
Object Lens 4x
1
Stand assemble guide
1
Object Lens 10x
Option
MicroSD Card
Option
Software download: https://www.vitiny.com/en/download.html
1.2 Assemble microscope with stand
1.2.1 Fix microscope
Tighten the microscope onto stand ○
a. Refer to stand
assembling instruction for detailed explanation.
3
1.2.2 Start to use microscope
Connect the HDMI cable ○
c and adaptor ○
d to HDMI
monitor and power. See below:
1.2.3 Power On/Off
Press Power to turn on microscope. Choose HDMI mode
or Auto on HDMI monitor to output image. *Long press
○
a
○
b
○
c
4
means press and hold the button for 2 seconds.
1.3 IR Remote controller
The microscope operation and functions is controlled by the IR
remote controller.
(1) Power ：Turn on/off.
(2) HDMI ：When in HDMI mode, the HDMI cable must
connect with the screen and microscope.
(3) PC CAM ：The USB cable must connect to a PC and
microscope in PC CAM mode. Please disconnect software
before switching to HDMI mode or powering off. If SD card
is loaded, a USB Disk will also show up.
5
(4) Snapshot ：In HDMI mode,
press button to save an
8MP .jpg file into SD card. Per
snapshot takes 9 Seconds to
complete. In PCCAM mode,
press snapshot to take an 8MP
image, select photo type when
saving the image on the
software.
(5) LED Adjustment: 12 levels of
brightness.
(5-1) Increase ：Increase
LED brightness.
(5-2) Decrease ：Decrease LED brightness.
(5-3) On/Off ：Turn the LED on/off. When turn on the LED,
the brightness will return to the situation before turn off.
(6) Motor Reset (Recalibrates entire operation)：Returns to
the lens position. If a loss of electricity occurred during
operation, please reset the operation.
(7) Manual focus
6
(7-1) Zoom in ：Zooms in; speed increases when held.
(7-2) Zoom out ：Zooms out; speed increases when held.
(7-3) Step zoom in ：Zoom in by steps.
(7-4) Step zoom out ：Zoom out by steps.
(8) Autofocus: Press one time to search focus in current area,
long press for 2 seconds to search focus in whole area.
(8-1) Single Autofocus ：Focuses one time.
(8-2) Continuous Autofocus ：Re-focuses when image
blurred.
(9) Exposure Value: 14 levels of exposure value are selectable,
from -7 ~ Auto ~ +6.
(9-1) Increase ：Use to increase exposure when the image
is too dark.
(9-2) Decrease ：Use to decrease exposure when the image
is too bright.
(10) Menu on Screen ：Open/close menu for setting. Refer to
Section 1.4.
(11) Up ：Choose the previous item, if Crosshair is ON, select
other color.
(12) Down ：Choose the next item, if Crosshair is ON, select
other color.
7
(13) Left ：Choose the next value, if Crosshair is ON, select Line
Size.
(14) Right ：Choose the last value. When MENU function is off,
press to turn on/off Crosshair.
(15) Video Ratio ：No Function.
(16) Status Bar ：There are 8 fixed information on Status bar
and one is operating information which only display 3 sec. If
see different lens mode, such as [FL, FLC, TL], it’s for free lens
such as 4x long focus lens or CSZ-series. It will disable the LED
light, WD, FOV and show only OZ (sensor position), and EV
(Exposure). Longer press 6 secs on the Status Button to switch
to standard 4X/10X lens mode.
8
(16-1) Fixed information：
(16-1-1) 4X ○
d：Object Lens (4X/10X) or other Lens type.
(FL/FLC/TL)
(16-1-2) FOV ○
e：Field of View (FOV) display image on the
effective horizontal size of screen.
(16-1-3) MAG ○
f：(Magnification) The magnification size
will change depending on the lens position, screen
size, and image ratio.
(16-1-4) WD ○
g：Working Distance.
(16-1-5) EV ○
h：Exposure Value levels.
○
g
○
h
○
i
○
j
○
k
○
l
○
d
○
e
○
f
Indice
Altri manuali ViTiny Microscopio
ViTiny
ViTiny VT300 Manuale utente
ViTiny
ViTiny Fun 50 Manuale utente
ViTiny
ViTiny UM08B-CSZ064C Manuale utente
ViTiny
ViTiny UM20-GN Manuale utente
ViTiny
ViTiny UM20-GN08 Manuale utente
ViTiny
ViTiny DiGi UM20 Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny DiGi UM06 Manuale utente
ViTiny
ViTiny UM08 Manuale utente
ViTiny
ViTiny PRO10 Manuale utente
ViTiny
ViTiny UM20-CSZ1236 Manuale utente
ViTiny
ViTiny UM08B-CSZ064 Manuale utente
ViTiny
ViTiny UM20D-CSZ064 Manuale utente
ViTiny
ViTiny PRO10 Manuale utente
ViTiny
ViTiny UM-CAM Manuale utente
ViTiny
ViTiny UM08D-CSZ064 Manuale utente
ViTiny
ViTiny UM20B-CSZ064 Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny UM12 Manuale utente
ViTiny
ViTiny DiGi UM06 Manuale utente
