Volt VPL-1041-4-BBZ Manuale utente
VOLT®Low Voltage Landscape Lighting
12V Mini Rotunda Bollard
VPL-1041-4-BBZ
INSTALLATION INSTRUCTIONS
- 1 -
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
Specications and product details subject to change without notice.
© Copyright 2019, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3700
VOLT®12V Mini Rotunda Bollard
VPL-1041-4-BBZ
Important: Please Read Before Installation
Important Safety Instructions
INSTALLATION INSTRUCTIONS
!
!
www.voltlighting.com
- 2 -
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing this
xture.
2. Warning: this xture is not intended to be installed within 10 feet [3
meters] of a pool, spa or fountain.
3. This xture is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in
order to connect to the main low voltage cable.
5. Wiring connections must be made with UL Listed wire connectors that
are suitable for the application.
6. Position the wire connector so that it is located within 6 inches (15.2 cm)
from a building structure, a luminaire, or tting.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before reducing lamp.
2. Lamp gets HOT quickly!
3. Do not touch the hot lens, guard or cowl.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time.
6. Use a soft cloth.
7. Oil from skin may damage lamp.
8. Do not operate the xture with a damaged or missing lens or shield.
Package Contents
Product Dimensions
- 3 -
A. (1) Fixture Body
B. (1) Coupler
Two installation options are available for this xture.
1. Stake mount (option 1): Step 1 - Step 2, then go to Step 4.
2. Surface mount (option 2): Step 3, then go to Step 4.
23.75”
4.72”
7.1”
INSTALLATION INSTRUCTIONS
www.voltlighting.com
Stake Mount (Option 1)
- 4 -
Install Stake
Install Fixture Body to Stake
1
2
Board
Ground
Soil
Stake
VOLT®12V Mini Rotunda Bollard
VPL-1041-4-BBZ
Fixture Body
CouplerFixture Wire
Ground
Soil
Stake
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until ange of stake
is ush to grade. To avoid
damage to the stake, place a
board on top of the stake while
hammering.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Pass the xture wire through
the coupler and the center hole
of the stake. Thread the xture
body, the coupler and the stake
together. Hand tighten until
snug.
- 5 -
Surface Mount (Option 2)
Install Fixture Body with Self-tapping Screws
3
Self-tapping
Screw
Anchor
Base
Concrete or Brick
Fixture Body
Ground
Wire Connections
4
Pigtail
Main Supply Cable
Supply Wire from
Fixture Body
Wire Connectors
Place the xture body on the
desired location and make three
marks on the ground using the
holes on the base.
Remove the xture body and
drill proper holes into the
ground.
Insert the anchors into the
drilled holes, then place the
base of the xture body onto
the anchors and secure by
threading self-tapping screws
into anchors. Hand tighten with
a screwdriver.
Strip both leads from xture body. Using two wire connectors (sold
separately), connect the leads from the xture body to the main supply
cable leads.
INSTALLATION INSTRUCTIONS
www.voltlighting.com
- 6 -
VOLT®12V Mini Rotunda Bollard
VPL-1041-4-BBZ
Remove Fixture Top
5
Install Lamp
6
Rotate the xture top and
remove it from the xture
body.
Fixture Body
Rotate
Fixture Top
Insert the lamp with correct
wattage and type marked on
the xture label and secure
tightly into place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
Lamp
Socket
- 7 -
Install/Replace Lamp
Install Fixture Top
7
Thread the xture top back
onto the xture body. Hand
tighten until snug.
Fixture Body
Rotate
Fixture Top
Please reverse Step 5 - Step 7 to expose the lamp and replace it with the
correct wattage and type marked on the xture label. And then reinstall
the xture top.
IMPORTANT: Lamp must be protected from moisture and dust at all times.
Always reinstall the xture top when removed.
IS-VPL-1041-4-BBZ-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2019, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3700
www.voltlighting.com
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
- 8 -
Indice
Altri manuali Volt Illuminazione del paesaggio
Volt
Volt VWL-705-BBZ Manuale utente
Volt
Volt VAL-180 Manuale utente
Volt
Volt VAL-2000-4-BBZ Manuale utente
Volt
Volt VWL-510 Series Manuale utente
Volt
Volt VPL- 398 Manuale utente
Volt
Volt VUL-6804-25-BBZ Manuale utente
Volt
Volt VFL-450X-BBZ Manuale utente
Volt
Volt VAC-AL-GGT1-BBZ Manuale utente
Volt
Volt VSSI-2005-50-BK Manuale utente
Volt
Volt VSPL-9001-25-BBZ Manuale utente
Volt
Volt LED Top Dog Tommy Light Manuale utente
Volt
Volt 3601 Series Manuale utente
Volt
Volt 3602 Series Manuale utente
Volt
Volt VHS-668-4-BBZ Manuale utente
Volt
Volt VPL-1024 Manuale utente
Volt
Volt VPL-1001-4-BBZ Manuale utente
Volt
Volt VAL-2043-LI-ABK Manuale utente
Volt
Volt VAL-2101-0-BBZ Manuale utente
Volt
Volt VFL-4601-BBZ Manuale utente
Volt
Volt VUL-6802-25-BBZ Manuale utente
Manuali Illuminazione del paesaggio popolari di altre marche
Cooper Lighting
Cooper Lighting MCGRAW-EDISON WBG Manuale utente
Cooper Lighting
Cooper Lighting Invue 42 - 175W Manuale utente
Saxby Lighting
Saxby Lighting Islay 68784 Manuale
LIGMAN
LIGMAN EU-10016-3 Manuale utente
Cooper Lighting
Cooper Lighting McGraw-Edison ZD Credenza Manuale utente
LIGMAN
LIGMAN KI-60475 Manuale utente
