Wasp WWS800 Manuale

Portal > Knowledgebase > Hardware > Scanners > WWS800/850 > WWS800 or WWS850 scanner setup instructions

WWS800 or WWS850 scanner setup instructions

Sicaro Burnett - 2017-07-14 - in WWS800/850

Notes & steps for getting the WWS800 or WWS850 to work with a Bluetooth base:

A. Look at the bottom of the base. If there are 2 barcode labels (1 with Set Connection and 1 serial number) this is the Bluetooth

base, and it is the easiest base to work with. There is another base which is charging only, and it does not have a Set Connection

barcode. If it's charging-only, a separate Bluetooth adapter (or built-in Bluetooth) will need to be used.

B. The base has an AC adapter that needs to be plugged in so the base is powered on, with red or blue LEDs lit up.

C. The data communication cable has an HD15 plug at one end that connects to the base. Usually the other end of that cable is

USB. If it's PS2 (round) or serial (9-pin trapezoid), a USB cable can be purchased from Wasp since it is by far the easiest to work

with.

Steps to pair a WWS800 or WWS850 scanner to its Bluetooth base station:

1. From the bottom of the base, scan the Set Connection barcode. If it beeps 3 times, go to Step 4.

Note: If you have trouble scanning this one, you can scan Set Connection from page 1 of the Reference Guide; these are identical.

2. Then scan the serial number barcode next to it.

3. Test the connection by opening Notepad, MS Word, or some other application that accepts text input from a keyboard, then

scan a barcode from the Test Symbols section of the manual, or a UPC barcode from a product. The application should show the

data from the barcode.

If it's not working, we need to set the scanner to defaults. If you don't have a hardcopy already, print a page from the Reference

Guide PDF. Usually this is PDF page 3, which will show pages 1 & 2 at the bottom of the printed page.

4. From page 2 at the bottom, scan the Enter Setup barcode.

5. From page 1 at the top, scan the Restore Default Settings barcode.

6. From page 1 at the bottom, scan the Update barcode.

7. Go back to step 1.

Scanner User Manuals, Programming Reference Guides, Quick Reference Guides, Quick Start Guides (multiple models)

How to set the WWS800 or WWS850 to factory default

Altri manuali per WWS800

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Wasp Lettore di codici a barre

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente