Win PL-80690 Manuale utente
User’s Manual
WIN Enterprises, Inc. June., 2014
1
PL-80690
Networking Appliance
Desktop Intel
Celeron
(codename Bay Trail) Network System,
Four Copper GbE, CF, SATA and mini-PCIe
User’s Manual
Version 1.0
User’s Manual
WIN Enterprises, Inc. June., 2014
2
© Copyright 2014. All Rights Reserved
Manual Edition 1.0, June, 2014
This document contains proprietary information protected by copyright. All rights are reserved;
no part of this manual may be reproduced, copied, translated or transmitted in any form or by any
means without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer
assumes no responsibility for any inaccuracies that may be contained in this manual. The
original manufacturer reserves the right to make improvements to the products described in this
manual at any time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International Business
Machine Corporation (IBM).
Award is a trademark of Award Software International, Inc.
Intel is a trademark of Intel Corp.
RTL is a trademark of Realtek.
VIA is a trademark of VIA Technologies, Inc.
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks
of Microsoft Corporation.
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the
manufacturer and distributor assume no liability resulting from errors or omissions in this
document or from the use of the information contained herein.
For more information on PL-80690 or other WIN Enterprises products, please visit our website:
www.win-ent.com.
For technical support send inquiries to:
sales@win-ent.com.
User’s Manual
WIN Enterprises, Inc. June., 2014
3
Table of Contents
Chapter 1. General Information.................................................................... 4
1.1 Introduction.............................................................................................. 4
1.2 Specifications .......................................................................................... 5
1.3 Ordering Information............................................................................... 6
1.4 Packaging ................................................................................................ 6
1.5 Precautions .............................................................................................. 7
1.6 System Layout ......................................................................................... 8
1.7 Board Dimensions................................................................................... 9
Chapter 2. Connector/Jumper Configuration............................................ 10
2.1 Connector/Jumper Location and Definition........................................ 10
2.2 Connector and Jumper Setting ............................................................ 12
2.3 CompactFlash
TM
Card Socket Pin Define ............................................ 18
Chapter 3. BIOS Setup ................................................................................ 19
3.1 Quick Setup............................................................................................ 19
3.2 Entering the BIOS Setup Utility ............................................................ 20
3.3 Menu Options......................................................................................... 21
3.4 Advanced Menu ..................................................................................... 22
3.4.1 Platform function................................................................................ 23
3.4.2 NCT6791D Super IO Configuration ................................................... 24
3.4.3 NCT6791D HW Monitor ...................................................................... 25
3.4.4 IDE Configuration. .............................................................................. 26
3.4.5 USB Configuration ............................................................................. 27
3.4.6 Hardware Health Configuration......................................................... 28
3.4.7 Console Redirection........................................................................... 29
3.5 Boot Menu.............................................................................................. 30
3.6 Security Menu ........................................................................................ 31
3.7 Chipset Menu ......................................................................................... 32
3.8 Chipset Menu ......................................................................................... 35
Chapter 4. Utility & Driver Installation…………………………....……………37
Appendix A: Programming the Watchdog Timer ...................................... 39
Appendix B: Cable development kit .................Error! Bookmark not defined.
User’s Manual
WIN Enterprises, Inc. June., 2014
4
Chapter 1. General Information
1.1 Introduction
The PL-80690 is an affordable cost effective desktop platform designed for network service
applications. Built with Intel® Embedded IA components with warranty of longevity, the PL-80690
supports Intel® Celeron® Bay Trail-D, Bay Trail-I and Bay Trail-M low-voltage processors.
The platform supports onboard DDR3L memory chips with a maximum capacity of 2GB. In order
to provide the best network performance and utilization. The standard device comes equipped
with 4GB eMMC storage and interfaces including one 2.5” SATA HDD and CompactFlash™.
For network security, the PL-80690 is equipped with 4 Copper GbE, USB2.0 ports, RJ-45
console port and an optional mini-card socket with LED indicators that monitor power, storage
device activities for local system management, maintenance and diagnostics.
User’s Manual
WIN Enterprises, Inc. June., 2014
5
1.2 Specifications
CPU Intel® E3815 (Bay Trail-I) Processors
Processor System
BIOS AMI UEFI BIOS
Technology
Onboard DDR3L memory.
Memory
Capacity Up to 2GB
Expansion Expansion Slots One mini-PCIe socket via PCI-E x1.(Option)
GbE Ethernet Four Copper GbE ports, Intel I211, PCI-E x1
Ethernet
LAN bypass N/A
SATA HDD One internal 2.5” SATA HDD bayStorage
Compact Flash
Socket
one CompactFlash
TM
Type II
USB Two external USB2.0I/O
Serial One RJ45 Console port (COM1)
Power Supply Watt 40W power supply, AC to DC 12V
Form Factor Desktop
LED Power LED
HDD LED
4 pairs LEDs for 4 Ethernet ports Active/Link
status
Dimension
（
W x D x
H
）
232mm (W) x 153mm (D) x 44mm (H)
(9.1W x 6” D x 1.7” H)
Operating
Temperature Operating: 0 ~ 40°C ( 32 ~ 104°F )
Storage Temperature
-20 ~ 75°C (-4 ~ 167°F)
Humidity 10 ~ 85% relative humidity, non-operating,
non-condensing
Mechanical and
Environment
Certifications CE/FCC
User’s Manual
WIN Enterprises, Inc. June., 2014
6
1.3 Ordering Information
We offer some accessories for PL-80690 appliance for customer need.
PL-8069A Desktop Intel Bay Trail E3815
Network System, 4x GbE, 1GB
onboard DDR3 Memory, 4GB eMMC
and SATA
PL-8069B Desktop Intel Bay Trail E3815
Network System, 3x GbE, 1GB
onboard DDR3 Memory, 4GB
eMMC, SATA and mini-PCIe
PL-8069C Desktop Intel Bay Trail E3815
Network System, 4x GbE, 1GB
onboard DDR3 Memory, CF, SATA
and mini-PCIe (via USB)
Optional
DK Cable development kit
CB-CO5204-00 Cross over 2M
CB-EC5200-00 Ethernet cat.5 cable
2M
CB-RJDB91-00 RJ-45 to DB-9 cable
2M
CB-IVGA01-00 VGA cable
1.4 Packaging
Please make sure that the following items have been included in the package
before installation:
1. PL-80690 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
If any item of above is missing or damaged, please contact your dealer or retailer
from whom you purchased the PL-80690. Keep the box and carton for possible
future shipment or storage. After you unpack the goods, inspect and make sure
the product is intact. Do not plug the power adapter to the appliance if it appears
damaged.
User’s Manual
WIN Enterprises, Inc. June., 2014
7
Note: Keep the PL-80690 in the original packaging until you start installation.
1.5 Precautions
Please make sure you properly ground yourself before handling the PL-80690
appliance or other system components. Electrostatic discharge can be easily
damage the PL-80690 appliance.
Do not remove the anti-static packing until you are ready to install the PL-80690
appliance.
Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself, grasp the expansion slot covers or
other unpainted areas of the computer chassis.
Handle the PL-80690 appliance by its edges and avoid touching the components
on it.
User’s Manual
WIN Enterprises, Inc. June., 2014
8
1.6 System Layout
PL-80690 Front Side
Layout
PL-80690 Rear Side
Layout
User’s Manual
WIN Enterprises, Inc. June., 2014
9
1.7 Board Dimensions
User’s Manual
WIN Enterprises, Inc. June., 2014
10
Chapter 2. Connector/Jumper Configurations
2.1 Connector/Jumper Location and Definitions
Indice
