Xerox Phaser 3610 Manuale utente

haser® 3610, WorkCentre® 3615

Service Manual

August 2015

haser® 3610, WorkCentre® 3615

Service Manual

Updated 8/27/15 DAW

www MK-Electronic de

haser 3610, WorkCentre 3615 Service Manual 5-1

Parts List

In this chapter...

•Serial Number Format

•Using the arts List

•arts Lists

•L 1.1 Covers (3610)

•RE 5.6 MCU WB

•L 1.3 Rear Cover Assembly

•L 1.4 Control anel (3610)

•L 1.5 Control anel (3615)

•L 2.4 Duplex Chute

•L 2.1 Registration

•L 2.3 Feed Assembly

•L 2.1 Registration

•L 2.4 Duplex Chute

•L 2.6 MSI

•L 2.7 Bypass Tray

•L 3.1 Xerographics

•L 3.2 ROS Assembly

•L 3.3 Toner Dispense

•L 3.4 Transfer Roller

•L 3.5 Fusing Assembly

•L 4.1 Drive

•L 4.2 NOHAD

•L 5.1 Electrical (ESS WB / LV S) (3610)

•L 5.2 Electrical (ESS WB / LV S) (3615)

•L 5.3 Electrical (MCU WB / HV S)

•L 5.4 Electrical Connections

•L 6.1 IIT Scanner / DADF

•L 7.1 Tray 1/Optional Tray 550-Sheet Feeder (1/4)

•L 7.2 Tray 1/Optional Tray 550-Sheet Feeder (2/4)

•L 7.3 Tray 1/Optional Tray 550-Sheet Feeder (3/4)

•L 7.4 Tray 1/Optional Tray 550-Sheet Feeder (4/4)

•Quick Reference Spares List for the 3610 and 3615

•Xerox Supplies

www MK-Electronic de

arts List

haser 3610, WorkCentre 3615 Service Manual5-2

erial Number Format

Changes to Xerox products are made to accommodate improved components as they become

available. It is important when ordering parts to include the following information:

• Component's part number

• roduct type or model number

• Serial Number of the printer

The serial numbers are only reset to the starting serial number when the ending serial number is

reached. At that time the revision digit will be rolled. Serial numbers below 10001 are reserved for XOG

Final Integration Center (FIC) sites if re-serialization is needed.

Note: Not all of the serial number will be used. This is a buffer in case additional units are built by

Fuji Xerox for each model of printer during pre-production.

110V Engine Format

The nine-digit serial number has the following format:

PPPSSSSSS

•PPP = Three digit alphanumeric product code

•SSSSSS = Six digit numeric serial number

Table 1: 110V Engine Format

Product Product Code Starting Serial Number Ending Serial Number

Pre-Production (PP)

xxxx_xx, 110V Engine xxx xxxxxx xxxxxx

Mass Production (MP)

xxxx_xx, 110V Engine xxx xxxxxx xxxxxx

* Not all of the serial numbers will be used. This is a buffer in case additional units are built by FX during pre-

production

* Serial numbers between xxxxxx - xxxxxx are reserved for XOG FIC sites if re-serialization is needed. A serial

number break or a new serial number range will be provided when a major product change occurs.

www MK-Electronic de

arts List

haser 3610, WorkCentre 3615 Service Manual 5-3

220V Engine Format

• MMMSSSSSSc

• = Manufacturing Location Code, 3 digit numeric code

•SSSSSS = Six digit numeric serial number

•c = check digit

Examples

110V Printer

• xxxxxxxxx: Xerox Serial Number

•roduct code for 110V printer = xxx

• Serial number for xxxx_xx = xxxxxx

220V Printer

• xxxxxxxxx

• Manufacturing location code for 220V printer = xxx

• Serial number for xxxxx_x = xxxxxx

• Check digit = x

Table 2: 220V Engine Format

Product Product

Code

anufacturing

Location Code

Starting Serial

Number

Ending Serial

Number

Pre-Production (PP)

xxxxx_x, 220V Engine xxx xxx xxxxxx xxxxxx

xxxxx_xx, 220V Engine xxx xxx xxxxxx xxxxxx

ass Production ( P)

xxxxx_x, 220V Engine xxx xxx xxxxxx xxxxxx

xxxxx_xx, 220V Engine xxx xxx xxxxxx xxxxxx

* Not all of the serial numbers will be used. This is a buffer in case additional units are built by FX during pre-

production.

www MK-Electronic de

arts List

haser 3610, WorkCentre 3615 Service Manual5-4

Serial Number Location and Layout

The serial number label is located on the frame behind the Front Cover.

3610-204

www MK-Electronic de

arts List

haser 3610, WorkCentre 3615 Service Manual 5-5

sing the Parts List

• ID No.: The callout number from the exploded part diagram.

• Name/ Description: The name of the part to be ordered and the number of parts supplied per

order.

• art Number: The material part number used to order that specific part.

• A black triangle preceding a number followed by a parenthetical statement in an illustrated parts

list means the item is a parent assembly, made up of the individual parts called out in

parentheses.

• The notation “with X~Y” following a part name indicates an assembly that is made up of

components X through Y. For example, “1 (with 2~4)” means part 1 consists of part 2, part 3, and

part 4.

• The notation “J1<>J2 and 2” is attached to a wire harness. It indicates that connector Jack 1 is

attached to one end of the wire harness and connector J2 is attached to the other end that is

plugged into 2.

Note: Only parts showing part numbers are available for ordering by support. arts not showing

part numbers are available on the parent assembly.

www MK-Electronic de

arts List

haser 3610, WorkCentre 3615 Service Manual5-6

arts Lists

L 1.1 Covers (3610)

s3610-141

21 (with 22,23)

98 (with 13,19)

97 (with 7,18)

7 (with 5,6)

(with 14,18)

5 (with 1-4)

(PL 2.4)

(PL 1.3)

95 (with 15,16)

www MK-Electronic de

 arts List
 haser 3610, WorkCentre 3615 Service Manual 5-7
 arts List 1.1 Covers (3610)
Item Description art Number
Front Cover 
Interlock Actuator 
Interlock Spring 
Interlock Holder 
Front Cover Assembly (with 1-4)
Label MSI Instruction
Front Cover Assembly (with 5, 6) (RE  1.2) 604K85880
Lower Rear Cover (RE  1.8) 848E82672

Left Side Cover (RE  1.7) 848E82792
Top Front Cover
Cover Extension
Cover Extension 2nd
Top Front Cover Assembly (with 14, 18) (RE  1.4) 604K84920
Logo  late Assembly

Right Side Cover (RE  1.6) 604K84941
Top Cover Assembly (with 22, 23) (RE  1.4) 848K62885
Top Cover (Mid)
Exit Cover (Mid)


Rear Cover Assembly (RE  1.5) 848K70060
Spring-earth DTS Out
Duplex Chute Assembly ( L 2.4) (RE  2.1) 054K48100
Top Front Cover Extension Assembly (with 15, 16) (RE  1.3) 604K77391
Cover Assembly Front (with 7,18)
Left Side Cover Assembly (with 13, 19)
www MK-Electronic de

arts List

haser 3610, WorkCentre 3615 Service Manual5-8

L 1.2 Covers (3615)

s3610-15

21 (with 22,23)

(PL 2.4)

(with 5,6)

(with 14,18)

5 (with 1-4)

22 29

(PL 1.3)

(with 15,16)

www MK-Electronic de

 arts List
 haser 3610, WorkCentre 3615 Service Manual 5-9
 arts List 1.2 Covers (3615)
Item Description art Number
Front Cover 
Actuator Interlock
Spring Interlock
Holder Interlock
Front Cover Assembly (with 1-4)
Label MSI Instruction
Front Cover Assembly (with 5, 6) (RE  1.2) 604K85890
Lower Rear Cover (RE  1.18) 848E82672




Left Side Cover (RE  1.11) 848E82815
Top Front Cover 
Cover Extension
Cover Extension 2nd
Top Front Cover Assembly (with 14, 18) (RE  1.3) 604K84931
Logo  late

Right Side Cover (RE  1.13) 848K68342
Top Cover Assembly (with 22, 23) (RE  1.15) 848K62912
Top Cover
Exit Cover 


Rear Cover Assembly ( L 1.3) (RE  1.8) 604K85650
IIT Lower Right Cover (RE  1.13) 848E82901
IIT Right Inner Cover (RE  1.14) 848E89270
Earth Spring 
Duplex Chute Assembly ( L 2.4) (RE  2.1) 054K48100
Upper Left Side Cover (RE  1.11) 848E89213
Upper Right Side Cover (RE  1.13) 848E89231
Kit Cover Assembly Extension (with 15, 16) (RE  1.3) 604K85900
www MK-Electronic de