Zoom H2next Manuale utente
Quick Guide
You must read the Usage and
Safety Precautions before use.
© 2020 ZOOM CORPORATION
Copying or reprinting this manual in part or in whole without permission is prohibited.
Product names, registered trademarks and company names in this document are the property of
their respective companies.
All trademarks and registered trademarks in this document are for identification purposes only and
are not intended to infringe on the copyrights of their respective owners.
You might need this manual in the future. Always keep it in a place where you can access it easily.
The contents of this manual and the specifications of the product could be changed without notice.
The Operation Manual can be downloaded from the ZOOM website (www.zoom.
jp/docs/h2n).
This page has files in PDF and ePub formats.
The PDF file format is suitable for printing on paper and reading on a computer.
The ePub format can be read with electronic document readers and is designed
for reading on smartphones and tablets.
Part names
02
Part names
MS stereo mic
XY stereo mic
Speaker
Recording
indicator
Record button
Volume control
USB port
Headphones
/LINE OUT jack
LINE IN jack for
mic/line input
(can provide
plug-in power)
Remote control
jack (Remote
control sold
separately)
Left side Front
Part names
03
H2n Handy Recorder
Part names
Bottom
MENU button
MIC GAIN dial
Adjusts mic
input gain
Power
/HOLD switch
Strap attachment
(Use to prevent dropping)
PLAY control
Press to play/pause
(in menu, set item)
Shift up/down to search
forward/backward
(in menu, select item)
Battery
compartment
cover
Recording mode
selection dial
XY mic indicator Lights when
the XY mic (front) is ON.
Flashes when the input signal is
distorting.
MS mic indicator Lights
when the
MS mic (rear) is ON.
Flashes when the input
signal is distorting.
SD card slot cover
Tripod mounting socket
Right side To p
Preparation Powering the recorder
04
NOTE
· Use alkaline or nickel-metal hydride batteries.
· If the “Low battery!” warning appears, turn the power OFF
soon and put in new batteries.
· Use MENU > SYSTEM > BATTERY TYPE to set the type of
battery so that the amount of remaining battery charge can
be shown accurately.
Preparation
Powering the recorder
1. Turn the power OFF, and then remove the battery cover.
1. Connect the cable to the USB port.
3. Close the cover.
2. Insert batteries.
2. Plug the adapter into a power outlet.
Using batteries
Using an AC adapter (sold separately)
Press here
and slide down
Preparation Installing an SD card
05
H2n Handy Recorder
Installing an SD card
1. After turning the power OFF, open the SD card slot cover.
2. Insert the card into the slot.
To remove a card, push it further into
the slot and then pull it out.
HINT
Built-in memory
· The built-in memory only keeps the most recent recording.
· The recording format is fixed at 96kbps MP3.
· It cannot be used to record in 4ch surround or MS-RAW modes.
· Recording time is limited to 1 minute.
· Recordings saved to the built-in memory cannot be copied to an SD card or a computer.
NOTE
· Be sure to insert the SD card correctly, using the cut-off corner illustration next to the
slot as a guide.
· The built-in memory will be used if no SD card is in the recorder.
· Before using SD cards that have just been purchased or that have been formatted on a
computer, they must be formatted by the . To format an SD card, use MENU >
SD CARD > FORMAT.
Preparation Turning the power ON and OFF
06
HINT
Slide toward HOLD to disable the keys and prevent
misoperation during recording.
Turning the power ON and OFF
1. Slide down.
Turning the power ON
NOTE
· If “No SD card!” appears, confirm that an SD card is
correctly inserted into the recorder.
· If “Card Protected” appears, SD card write
protection is ON. Turn write protection OFF by
sliding the “Lock” switch on the card.
· If “Invalid card” appears, the card format is
incorrect. Use a different card or format the card.
1. Slide down and hold it until “Goodbye
see you!” appears on the screen.
Turning the power OFF
Preparation Setting the date and time
07
H2n Handy Recorder
Setting the date and time
1. Press .
2.
Use
to select SYSTEM, and then press
.
3. Use to select DATE/TIME, and then
press .
5. Use to select OK, and then press .
The date and time is added to recording files automatically, so set it correctly
whenever the batteries are replaced.
4. Adjust the settings.
Use to move the cursor
Press to select the item
Use to change the value
Press to confirm the setting
Preparation Display
08
Display
Home (recording) screen
Recording modeRecording mode
(File name shown during recording)
Recording time
LINE IN jack in
use indicator
Recording format
(WAV example)
(MP3 example)
Recording level
(Appearance in 4ch surround mode)
MS mic recording level
XY mic recording level
LO CUT
indicator
COMP/LIMITER
indicator
AUTO GAIN/AUTO REC indicator
(When AUTO REC enabled)
Remaining
battery level
indicator
Full
Empty
Clipping
indicator
Side level adjustment
(When set to MS-RAW)
Remaining recordable time
(When using built-in memory)
Playback time
Playing
(Playback paused)
Playback level
(Appearance in 4ch surround mode)
Playback speed Key control Side mic level
Mixer
(when in 4ch surround mode)
AB repeat
File name
Preparation Display
09
H2n Handy Recorder
Display
Playback screen
Recording modeRecording mode
(File name shown during recording)
Recording time
LINE IN jack in
use indicator
Recording format
(WAV example)
(MP3 example)
Recording level
(Appearance in 4ch surround mode)
MS mic recording level
XY mic recording level
LO CUT
indicator
COMP/LIMITER
indicator
AUTO GAIN/AUTO REC indicator
(When AUTO REC enabled)
Remaining
battery level
indicator
Full
Empty
Clipping
indicator
Side level adjustment
(When set to MS-RAW)
Remaining recordable time
(When using built-in memory)
Playback time
Playing
(Playback paused)
Playback level
(Appearance in 4ch surround mode)
Playback speed Key control Side mic level
Mixer
(when in 4ch surround mode)
AB repeat
File name
Recording Recording mode overview
10
The has four recording modes that can be selected according to your
purposes.
Mid-side (MS) stereo mode
This mode uses a mid mic to capture the sound
directly ahead and a bidirectional side mic to
capture sound from left and right.
The recording level of the side mic (S level) can
be adjusted, allowing the stereo width to be
changed. If you record with the S level set to
MS-RAW, you can also adjust the S level after
recording.
MS mics can capture a rich stereo image, so it is ideal for recording sounds in
wide and open conditions, including orchestras, live concerts and soundscapes.
XY stereo mode
This mode records in stereo with mics at 90º angles.
This allows a natural, deep and accurate sound image
to be captured, making it optimal for recording
sources nearby, including solo performances,
chamber music, interviews, live rehearsals and field
recordings.
Recording mode overview
Recording
L R
Side
(Adjustable)
Display
(front) side
Mid
Display
(front) side
LR
90°
Altri manuali per H2next
3
Indice
Altri manuali Zoom Strumento di misura
Zoom
Zoom F6 Istruzioni e ricette
Zoom
Zoom H6 Handy Recorder Manuale utente
Zoom
Zoom H1n-VP Manuale utente
Zoom
Zoom H6 Handy Recorder Manuale utente
Zoom
Zoom H5 Manuale utente
Zoom
Zoom F2-BT Manuale utente
Zoom
Zoom PodTrak P4 Manuale utente
Zoom
Zoom R4 Manuale utente
Zoom
Zoom H4essential Manuale utente
Zoom
Zoom Handy REcorder H1 Guida all'installazione
Zoom
Zoom F8n Pro Manuale utente
Zoom
Zoom R20 Manuale utente
Zoom
Zoom Handy REcorder H1 Manuale utente
Zoom
Zoom Handy Recorder H8 Istruzioni per il montaggio
Zoom
Zoom H6essential Manuale utente
Zoom
Zoom F8 Istruzioni e ricette
Zoom
Zoom MicTrak M3 Manuale utente
Zoom
Zoom Handy REcorder H1 Istruzioni utente
Zoom
Zoom H4N Manuale utente
Zoom
Zoom H1essential Manuale utente
