Zte MF10 Manuale utente

Published by Hutchison 3G UK Limited, trading as Three.

The contents of this publication are believed to be correct at the

time of going to press, but any information, products or services

mentioned may be modiﬁed, supplemented or withdrawn.

This publication is printed on fully recyclable paper.

XXXXX-XX Sep11

Three Customer Services

Hutchison 3G UK Ltd, PO Box 333, Glasgow, G2 9AG

ZTE MF10

Mobile Broadband

Wi-Fi hub.

Getting started

guide.

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

Your Three Mobile Broadband Wi-Fi hub allows

you to create a secure Wi-Fi connection using

your USB dongle. This means you can now

connect multiple devices to your dongle, like

laptops, tablets, games consoles and even

smartphones, all at the same time.

Mobile Broadband

with Three.

Contents:

3 Mobile Broadband with Three.

4 Getting started.

6 Connecting devices to your Hub.

10 Getting to know your Hub.

13 Security.

14 Managing your Account.

Our network is an advanced 3G

network designed to give you

a faster, smoother experience

when using Mobile Broadband.

And we have the UK’s biggest

3G network so you’ll get a 3G

signal more often and in more

places than on other networks.

It’s important to position

your hub where you have the

strongest signal, as this is

where Mobile Broadband works

best – like upstairs near a

window. The Wi-Fi means that

you can be online wherever you

like nearby, so you’re not tied to

using a cable.

2 3

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

1. Insert your SIM.

Ensure your SIM is inserted in your

Three dongle.

2. Prepare the hub.

Rotate the front cover, so that the part

with the Three logo is angled upwards.

Make sure the hub is switched off and

the power supply is unplugged, or you

could damage the hub.

3. Plug in the dongle.

Plug the USB dongle into the USB port

on the top of your hub.

4. Connect power and start.

Plug the hub into the mains power supply

and turn it on.

Turn the power switch on – located at the

back of your hub. Wait 1-2 minutes

after turning the hub on before you

use the service. The power indicator

should be lit.

Getting started.

Follow these simple steps to set up your hub.

4 5

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

Connecting to your hub varies depending on what device

you’ve got. See below for some examples of how to

connect. You can go to Three.co.uk/mbbhelp for more

help and support too.

Connecting to a

laptop or computer.

Turn on your hub and connect to the

internet.

In the Start Menu on your laptop/

computer, click on ‘Connect To’.

In the ‘Connect to a Network’

window, select your new hub network.

This is the SSID that’s located on

the back of your hub e.g. 3Wireless-

Adapter-xxxx.

Enter your unique Network Key and click

‘Connect’. You can ﬁnd the Network

Key on the base of your hub.

On the next screen, click on ‘Close’.

You should now be connected to your hub.

Connecting devices to

your Hub.

6 7

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

Connecting a Games

console – like a Sony PSP.

Turn on the PSP WLAN switch.

Select ‘Settings’ and then

‘Network Settings’.

Select ‘Infrastructure Mode’

to connect to your local Wi-Fi

access point.

Select ‘New Connection’ to

specify an easy to remember

connection name.

Select the ‘SSID’ the same way as

you did for the 3Wireless-Adapter.

First press the button of your games

console to conﬁrm the SSID and then

press it again to input the Wi-Fi key.

Press the button of your game

machine to continue, and then press

the ‘X’ button to save the settings.

Select ‘Test Connection’ to check

the connection. If the test succeeds,

you are online.

Go to the Internet Browser.

Connecting an iPhone,

iPod Touch or iPad.

Select ‘Settings’, then ‘Wi-Fi’, and

then turn on Wi-Fi.

Automatically detect the networks in

range and display the access point list.

Select a network that the hub is using.

If necessary, enter your password in

‘Security’ and tap ‘Join’. Networks

that need a password show a ‘Lock’

icon.

Some Wi-Fi devices like PS3 and

Nintendo DS can also access the internet

through mobile Wi-Fi.

You can ﬁnd out more in the set-up guide

that came with your device.

Advanced Settings.

We recommend that you don’t make any

changes to your hub settings. But if you

do want to make changes, you’ll need

to access the Mobile Broadband Home

Hub admin page.

To get to the admin page, type

http://192.168.0.1 into your web

browser, and then enter your username

and password shown below to log in.

User Name: admin

Password: admin

After you’ve made changes to your

settings, you’ll need to turn your router

off and on again.

Handy hint.

SSID: This is the Wi-Fi

name of your hub.

WEP: This is the Wi-Fi

key to your hub.

You can ﬁnd these on

the base of your hub.

8 9

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

Use the table opposite to ﬁnd out what the

problem could be. Then refer to the set-up

guide that came with your hub to ﬁnd out

what to do next.

The LED lights, including WLAN and PPP,

are all blinking in green when:

The SIM card has not been installed.

A PIN or PUK code is required.

The router is not working properly.

Getting to know

your Hub.

It’s important to get to know your hub as it can

help you ﬁgure out what’s wrong if you are having

difﬁculties connecting to Mobile Broadband.

LED light. What is it doing? What does it mean?

Power supply. On External power supply is

working normally.

Off External power supply is

disconnected or the hub is

turned off.

WLAN On WLAN is working normally.

Blinking Transmitting data.

Off WLAN is not working

properly.

PPP On You’re connected to the

internet.

Blinking The hub is trying to connect

to the internet.

Off The hub is not connected

to the internet, and it’s not

trying to connect.

WPS On WPS authentication is

started and available.

Blinking WPS authentication is in

progress or unavailable.

Off WPS authentication has not

started and is not available.

LAN Off No connection.

Solid Green Connected.

Flashing Green Data Service Process.

1 2 3 4

10 11

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

WPS: WPS button is used to

start Wi-Fi Protected Setup

authentication process.

LAN 1: Ethernet socket for a

connection to your device.

LAN 2: Ethernet socket for a

connection to your device.

Power Socket: Connection to the

external power supply.

Power Switch: Turns the hub On or

Off. Hold in for several seconds to

restore the factory default settings.

You’ll ﬁnd Ethernet sockets on the back of your

hub where you can plug in your devices with an

Ethernet cable. You’ll also ﬁnd the On/Off switch

on the back of your hub too.

54321

1 4

Security.

Your Mobile Broadband Wi-Fi Hub is password

protected with unique codes so that no-one else

can use your Wi-Fi connection. This is so you can

keep your details safe when you’re online.

The unique codes are called SSID

(Mobile Broadband Wi-Fi Hub name) and

Wi-Fi Key (unique password). You’ll ﬁnd

them on a sticker attached to the base of

your Wi-Fi hub.

12 13

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

Managing your

Account.

The easiest way to manage your account

online is to plug your dongle directly into the

USB port on your computer and follow the

links to My3 account from the homepage.

You can still view the customer

homepage when your dongle is

docked in the hub by going to

http://www.Three.co.uk/mbbconnect

You’ll need to register with My3 account

to manage your account while your

dongle is docked in the hub. To do this,

follow the links to My3 account from the

homepage and click ‘Register’.

1514

<224mm>

<112mm>

PANTONE Green C: For positional purposes only – Do NOT Print

Altri manuali per MF10

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

Zoom

Zoom 1070 Series Manuale utente

Aztech

Aztech HW831 Manuale utente