ACOEM Fixturlaser Laser Kit Istruzioni per il montaggio
Fixturlaser Laser Kit
Quick tips
Fixturlaser Laser Kit
STEP 2
1. Rough Alignment
and
2. Correct Obvious Soft Foot
shim
3. Follow Tightening Sequence
Follow the same sequence throughout the alignment pro-
Fixturlaser Laser Kit
Bolt Tightening Sequence
4. Make a Final Soft Foot Correction
Fixturlaser Laser Kit
Set Up
1. Mount the ‘S’ sensor on the stationary shaft or
coupling hub
2. Mount the ‘M’ sensor on the movable shaft or
coupling hub and hand tighten the nut use the titning
Tighten the nut Press the power button
Start the Laser Kit App
1. Click on the Fixturlaser Laser kit app on your device
2.
3.
Fixturlaser Laser Kit
Aim the Lasers
1.
adjustment wheel
adjustment knob
Fixturlaser Laser Kit
Enter Dimensions
1. Press the yellow tape measure icon to open the
2. Measure the indicated dimension to the nearest
Continue
Tape measure icon
Measure Misalignment
1.
the mea-
9:00 position Measurement icon
1. 9:00
2. 12:00
3. 3:00
Position the
sensors
within ± 3°
Fixturlaser Laser Kit
2.
measurement icon again to take the second
12:00 position
3.
Position the
sensors
within ± 3°
Fixturlaser Laser Kit
Evaluating the Results
1.
2. Green coupling icons indicate values which are within
3.
4.
Using the VertiZontal™ Process
First Correct the Vertical Misalignment
1.
2.
3.
Shim icon
Fixturlaser Laser Kit
Next Correct the Horizontal Misalignment
1.
2.
“Live reading” icon
3.
4.
5.
6. Some machines move laterally when tightening the
Altri manuali per Fixturlaser Laser Kit
1
Indice
Altri manuali ACOEM Strumento di misura
ACOEM
ACOEM Met One Instruments GAS-1060 Manuale utente
ACOEM
ACOEM Meax DU 01 Manuale utente
ACOEM
ACOEM Serinus 40 Manuale utente
ACOEM
ACOEM EVO Manuale utente
ACOEM
ACOEM Fixturlaser SMC BALANCER Istruzioni per il montaggio
ACOEM
ACOEM Serinus 44 Manuale utente
ACOEM
ACOEM AT-100 Manuale utente
ACOEM
ACOEM Fixturlaser Laser Kit Istruzioni per il montaggio
